S10 Disc Brake Help. Please? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dleeadams · 01-30-2013, 02:40 AM

Swapping (or trying to) drums to disc on a S10 4WD rear for a 51 swap. Anyone know of a way to use parts from the local pull apart or Oreillys? Really could use the advice.

63 & 64 Bowties · 01-30-2013, 12:36 PM

If you don't get an answer here, you might try posting the same question over on the S-10 area of this board.

dleeadams · 01-30-2013, 01:18 PM

Thanks will do.
Posted via Mobile Device

sweet70beast · 01-30-2013, 10:27 PM

I put an 89 4x4 S10 rear in my 53 Sub. I was looking at it and noticed that the backing plates bolt on differently than the older rear axles do. 8.2, 8.5, truck 12 bolt etc. Unless there is something newer that uses this same pattern then we might be stuck going aftermarket. You might want to look at 94 and newer S10's and see how the rear disc stuff bolts on to them, might get lucky.
My Nova has 79 Cadillac backing plates and calipers and 79 Firebird rotors on it. They bolted right on.

dleeadams · 01-31-2013, 01:10 AM

I actually have backing plates and calipers from a S10 4WD disc setup mounted on the axle now. I'm just going to load it in the truck and head down to the local parts store and see what i can come up with for rotors. How many diff ones can there be for an S10 4WD?

01-30-2013, 02:40 AM	#1
dleeadams Registered User Join Date: Nov 2012 Location: Olalla, Washington Posts: 26	S10 Disc Brake Help. Please? Swapping (or trying to) drums to disc on a S10 4WD rear for a 51 swap. Anyone know of a way to use parts from the local pull apart or Oreillys? Really could use the advice.

01-30-2013, 12:36 PM	#2
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: S10 Disc Brake Help. Please? If you don't get an answer here, you might try posting the same question over on the S-10 area of this board. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

01-30-2013, 01:18 PM	#3
dleeadams Registered User Join Date: Nov 2012 Location: Olalla, Washington Posts: 26	Re: S10 Disc Brake Help. Please? Thanks will do. Posted via Mobile Device

01-30-2013, 10:27 PM	#4
sweet70beast Registered User Join Date: Sep 2006 Location: Shelley Idaho Posts: 876	Re: S10 Disc Brake Help. Please? I put an 89 4x4 S10 rear in my 53 Sub. I was looking at it and noticed that the backing plates bolt on differently than the older rear axles do. 8.2, 8.5, truck 12 bolt etc. Unless there is something newer that uses this same pattern then we might be stuck going aftermarket. You might want to look at 94 and newer S10's and see how the rear disc stuff bolts on to them, might get lucky. My Nova has 79 Cadillac backing plates and calipers and 79 Firebird rotors on it. They bolted right on. __________________ 1970 Nova 327/T5 (my 1st car) 1971 K-20 350/350/205 (winter DD) 1953 GMC Suburban 1968 Chevy Bel Air 1976 Chev C-10 1972 Skylark (suncoupe) 1 of 3943 made

01-31-2013, 01:10 AM	#5
dleeadams Registered User Join Date: Nov 2012 Location: Olalla, Washington Posts: 26	Re: S10 Disc Brake Help. Please? I actually have backing plates and calipers from a S10 4WD disc setup mounted on the axle now. I'm just going to load it in the truck and head down to the local parts store and see what i can come up with for rotors. How many diff ones can there be for an S10 4WD?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.