The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-21-2018, 01:34 PM   #1
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Question Swapping columns

Next weekend I plan to swap steering column out in the ramp truck. I have the tilt column done and ready to install. Taking a old 3 speed out of it. I ordered a 3/4" 36 spline DD union to make it up to the shaft in the truck now. Here is what it looks like.
My plan is pull the steering column out of it. Then install the tilt and have it mounted. Take the rag joint and shaft and cut it as long as possible. Then remount it and cut it again for the right length.
I shouldn't have to take the fire wall bracket & boot out since the tilt is for a floor shifter. I have cut the gear selector rod off since this picture was took. I hope. No neutral switch to mess with either.

Anybody see anything I'm missing
Attached Images
     
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 11-21-2018, 09:36 PM   #2
hugger6933
Registered User
 
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,257
Re: Swapping columns

Looks like you have it figured out. You know how to build one and make it nice anyone that knows you is aware of that fact. Good luck and have some fun
hugger6933 is offline   Reply With Quote
Old 11-21-2018, 10:00 PM   #3
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Talking Re: Swapping columns

Quote:
Originally Posted by hugger6933 View Post
Looks like you have it figured out. You know how to build one and make it nice anyone that knows you is aware of that fact. Good luck and have some fun
Thanks,
I'm going to slide this one up closer to the dash for extra room even though I don't need it but I may in the future!
Are if I ever sell it the new owner may.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com