TX 78 K10 Part Out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

73kay · 11-14-2018, 03:02 PM

78 K10 Part Out
Frame, Engine, Tranny Not for Sale
I'll get some better pix up tonight after work.

CAB $300, bill of sale
FENDERS $75/ea
HOOD $100
*New INNER FENDERS 40/ea
CORE Support $60
TILT AUTO $150
REAR BUMP $50 off a newer chevy I think
HIGH HUMP $50
DOORS $75/ea
Gas tank 16 gallon $40/ea

SOLD
BED,Tailgate
FRT BUMPER
Front light bezels

All other parts please ask.

Cab has extremely clean floorpans Doors are decent with power locks and windows with wiring intact. Door panels have seen better days. Short Bed is 2 tank unit and is pretty decent, but there are some dents in the tailgate. Cab is solid and has minimal rust issues. Fenders are good, but have some pitting on the bottom. Hood is really good and not bend in the middle. Firewall is intact and I don't see a lot of issues with the cowl. I have new 30in A/T tires that I can include with the purchase. Currently has a body lift on it and blocks in the rear.

zr15053 · 11-14-2018, 03:36 PM

Do you have the factory jack with all the hardware?

73kay · 11-14-2018, 03:58 PM

I'm not sure about the mounting parts on the inner fender, I will have to check. I know in my garage I have an extra factory jack and handle.

**1968k20** · 11-14-2018, 04:45 PM

Interested in dash bezel and gauges

zr15053 · 11-14-2018, 05:36 PM

Quote:

Originally Posted by 73kay

I'm not sure about the mounting parts on the inner fender, I will have to check. I know in my garage I have an extra factory jack and handle.

No worries, its same as the c10 jack right? How much are you asking for it?

Trust_me · 11-15-2018, 08:25 AM

Can you send clear pictures for dash bezel and dash pad trim, And let me know price please

73kay · 11-15-2018, 09:38 PM

Here are some pix

73kay · 11-15-2018, 09:39 PM

Some more

73kay · 11-15-2018, 09:42 PM

Frame, axles, engine, tranny not for sale.

GRILL $40
Cab no title 300
FENDERS 75/ea
HOOD 100
IN FENDERS 50/ea
CORE SUPT 60
TILT AUTO 150
REA BUMP 50
HIGH HUMP 50
DOORS 75/ea
Gas tank 16 gallon 40/ea
Dash $40
Dash cluster $50
Seat belts $25

If there are any other parts your looking for, just let me know. Not too excited to ship big stuff, but small stuff is ok.

zr15053 · 11-16-2018, 03:38 AM

Did you get a chance to check on the jack?

73kay · 11-16-2018, 11:06 AM

Quote:

Originally Posted by zr15053

Did you get a chance to check on the jack?

I have the jack and scissors, but honestly not sure what other hardware is needed to mount it to the fender. Hope that helps.

zr15053 · 11-16-2018, 04:00 PM

Quote:

Originally Posted by 73kay

I have the jack and scissors, but honestly not sure what other hardware is needed to mount it to the fender. Hope that helps.

Can you please post some pics? And how much?

HotRod C/10 · 01-03-2019, 04:47 PM

$100 on tilt column?

73kay · 01-05-2019, 09:13 AM

Update: I have the cab $100, front clip minus hood $200, and the gas tanks left 20/ea

I also have a 78 K10 4x4 frame $600

Sorry for the long delays, I've been outta the country.

**med.bronze** · 01-05-2019, 11:04 AM

Interested in front bumper brackets. Thanks-Ryan

**old Rusty C10** · 01-05-2019, 05:10 PM

didn't read whole ad hood hinges if perfect operation to 07731 in Howell NJ

CJM72 · 01-06-2019, 12:17 PM

Any chance the front sway bar and spring plates where the sway bar attaches are available? If so, what do you want to ship all that to 02767? Thanks

Tony71c10 · 01-06-2019, 04:24 PM

Horn button condition, all tabs intact?

**SangerV** · 01-07-2019, 03:34 PM

Windshield wiper Motor ? Will it work for a 73-74 ?

73kay · 01-08-2019, 12:44 PM

Quote:

Originally Posted by SangerV

Windshield wiper Motor ? Will it work for a 73-74 ?

Not sure if the wiring is different or not. I know it will bolt on though.

73kay · 01-08-2019, 12:45 PM

Quote:

Originally Posted by Tony71c10

Horn button condition, all tabs intact?

Tilt Column is Sold.

73kay · 01-08-2019, 12:46 PM

Quote:

Originally Posted by CJM72

Any chance the front sway bar and spring plates where the sway bar attaches are available? If so, what do you want to ship all that to 02767? Thanks

Frame is pending sale. I'll let you know if it falls though.

73kay · 01-08-2019, 12:49 PM

Quote:

Originally Posted by CJM72

Any chance the front sway bar and spring plates where the sway bar attaches are available? If so, what do you want to ship all that to 02767? Thanks

Quote:

Originally Posted by med.bronze

Interested in front bumper brackets. Thanks-Ryan

Quote:

Originally Posted by old Rusty C10

didn't read whole ad hood hinges if perfect operation to 07731 in Howell NJ

OK, I just figured out multi quoting, sorry for the messages guys. Front bumper is sold.

Here is what I have left:

*******
Cab and small related parts ex: e brake, window, etc.
Front fenders
core support
bottom valence panel

11-14-2018, 03:02 PM	#1
73kay Registered User Join Date: Jul 2014 Location: Indy, IN Posts: 631	78 K10 Part Out 78 K10 Part Out Frame, Engine, Tranny Not for Sale I'll get some better pix up tonight after work. CAB $300, bill of sale FENDERS $75/ea HOOD $100 *New INNER FENDERS 40/ea CORE Support $60 TILT AUTO $150 REAR BUMP $50 off a newer chevy I think HIGH HUMP $50 DOORS $75/ea Gas tank 16 gallon $40/ea SOLD BED,Tailgate FRT BUMPER Front light bezels All other parts please ask. Cab has extremely clean floorpans Doors are decent with power locks and windows with wiring intact. Door panels have seen better days. Short Bed is 2 tank unit and is pretty decent, but there are some dents in the tailgate. Cab is solid and has minimal rust issues. Fenders are good, but have some pitting on the bottom. Hood is really good and not bend in the middle. Firewall is intact and I don't see a lot of issues with the cowl. I have new 30in A/T tires that I can include with the purchase. Currently has a body lift on it and blocks in the rear. Attached Images __________________ Andrew 1953 3100 235 T5 1985 K5 Blazer 350 700R4 208

11-14-2018, 03:36 PM	#2
zr15053 Registered User Join Date: Apr 2018 Location: Tempe Posts: 45	Re: 78 K10 Part Out Do you have the factory jack with all the hardware?

11-14-2018, 03:58 PM	#3
73kay Registered User Join Date: Jul 2014 Location: Indy, IN Posts: 631	Re: 78 K10 Part Out I'm not sure about the mounting parts on the inner fender, I will have to check. I know in my garage I have an extra factory jack and handle. __________________ Andrew 1953 3100 235 T5 1985 K5 Blazer 350 700R4 208

11-14-2018, 04:45 PM	#4
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: 78 K10 Part Out Interested in dash bezel and gauges __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

11-15-2018, 08:25 AM	#6
Trust_me Registered User Join Date: Aug 2012 Location: OHIO Posts: 73	Re: 78 K10 Part Out Can you send clear pictures for dash bezel and dash pad trim, And let me know price please

11-15-2018, 09:38 PM	#7
73kay Registered User Join Date: Jul 2014 Location: Indy, IN Posts: 631	Re: 78 K10 Part Out Here are some pix Attached Images __________________ Andrew 1953 3100 235 T5 1985 K5 Blazer 350 700R4 208

11-15-2018, 09:39 PM	#8
73kay Registered User Join Date: Jul 2014 Location: Indy, IN Posts: 631	Re: 78 K10 Part Out Some more Attached Images __________________ Andrew 1953 3100 235 T5 1985 K5 Blazer 350 700R4 208

11-15-2018, 09:42 PM	#9
73kay Registered User Join Date: Jul 2014 Location: Indy, IN Posts: 631	Re: 78 K10 Part Out Frame, axles, engine, tranny not for sale. GRILL $40 Cab no title 300 FENDERS 75/ea HOOD 100 IN FENDERS 50/ea CORE SUPT 60 TILT AUTO 150 REA BUMP 50 HIGH HUMP 50 DOORS 75/ea Gas tank 16 gallon 40/ea Dash $40 Dash cluster $50 Seat belts $25 If there are any other parts your looking for, just let me know. Not too excited to ship big stuff, but small stuff is ok. __________________ Andrew 1953 3100 235 T5 1985 K5 Blazer 350 700R4 208

11-16-2018, 03:38 AM	#10
zr15053 Registered User Join Date: Apr 2018 Location: Tempe Posts: 45	Re: 78 K10 Part Out Did you get a chance to check on the jack?

01-03-2019, 04:47 PM	#13
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 78 K10 Part Out $100 on tilt column? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

01-05-2019, 09:13 AM	#14
73kay Registered User Join Date: Jul 2014 Location: Indy, IN Posts: 631	Re: 78 K10 Part Out Update: I have the cab $100, front clip minus hood $200, and the gas tanks left 20/ea I also have a 78 K10 4x4 frame $600 Sorry for the long delays, I've been outta the country. __________________ Andrew 1953 3100 235 T5 1985 K5 Blazer 350 700R4 208

01-05-2019, 11:04 AM	#15
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: 78 K10 Part Out Interested in front bumper brackets. Thanks-Ryan __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

01-05-2019, 05:10 PM	#16
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,259	Re: 78 K10 Part Out didn't read whole ad hood hinges if perfect operation to 07731 in Howell NJ __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-06-2019, 12:17 PM	#17
CJM72 Registered User Join Date: Aug 2015 Location: Raynham, MA Posts: 222	Re: 78 K10 Part Out Any chance the front sway bar and spring plates where the sway bar attaches are available? If so, what do you want to ship all that to 02767? Thanks __________________ My LS Swap: http://67-72chevytrucks.com/vboard/s...d.php?t=718573

01-06-2019, 04:24 PM	#18
Tony71c10 Registered User Join Date: Feb 2017 Location: Houston tx Posts: 116	Re: 78 K10 Part Out Horn button condition, all tabs intact?



Register or Log In To remove these advertisements.

01-07-2019, 03:34 PM	#19
SangerV Junior Member Join Date: Mar 2018 Location: Goshen, IN Posts: 62	Re: 78 K10 Part Out Windshield wiper Motor ? Will it work for a 73-74 ?

Register or Log In To remove these advertisements.