The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-13-2018, 06:16 PM   #26
BAM55
Registered User
 
BAM55's Avatar
 
Join Date: Jan 2016
Location: Inglewood, CA
Posts: 324
Re: 1959 Fleetside Short Bed Project

Go check out the h.a.m.b board and see if you can find info on this. They do a lot of traditional rodding over there and someone may know something.
BAM55 is offline   Reply With Quote
Old 12-13-2018, 06:47 PM   #27
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,773
Re: 1959 Fleetside Short Bed Project

how low are you trying to go? you don't wanna drop it too much with a sold axle or it will be bottoming out all the time. what about a smaller diameter tire?
dsraven is offline   Reply With Quote
Old 12-13-2018, 06:49 PM   #28
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,773
Re: 1959 Fleetside Short Bed Project

got some pics with the wheels on and the new front axle stuff? too late already, thr truck is dissassembled into boxes now? lol.
dsraven is offline   Reply With Quote
Old 12-13-2018, 07:05 PM   #29
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

Quote:
Originally Posted by dsraven View Post
got some pics with the wheels on and the new front axle stuff? too late already, thr truck is dissassembled into boxes now? lol.
Haha no it is still one (incomplete) piece.

Here it is sitting on the ground, I just think it should be sitting lower. Granted there is no motor or trans in it and the tires are pretty small on 14's so it looks a little funky.



But if you look at the axle directly it looks like the truck would be really low, but the body is up too high.

__________________
1959 Apache Fleetside Short Bed
BLAC is offline   Reply With Quote
Old 12-13-2018, 08:04 PM   #30
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,773
Re: 1959 Fleetside Short Bed Project

I think you will be surprised when you load an engine and trans in there and drive it around a little until the springs get "set". it could make all the difference. of course, a set of wheels and tires would also help. any idea of the diameter you will go with for tires? I have some 235/55r17's on mine. dan from pasadena has the same size on his truck. here is a link to his build. check page 108 for a pic with that size tire to see if you like it. those tires are 27.2" tall. I may end up with some 235/60r17's just for the extra height. it will affect the highway cruising rpm, and fuel mileage, a bit

http://67-72chevytrucks.com/vboard/s...63698&page=108

here is a link to a tire size chart with a visual comparison tab and several other tabs. maybe come in handy for you.

https://tiresize.com/comparison/
dsraven is offline   Reply With Quote
Old 12-13-2018, 08:22 PM   #31
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

Quote:
Originally Posted by dsraven View Post
I think you will be surprised when you load an engine and trans in there and drive it around a little until the springs get "set". it could make all the difference. of course, a set of wheels and tires would also help. any idea of the diameter you will go with for tires? I have some 235/55r17's on mine. dan from pasadena has the same size on his truck. here is a link to his build. check page 108 for a pic with that size tire to see if you like it. those tires are 27.2" tall. I may end up with some 235/60r17's just for the extra height. it will affect the highway cruising rpm, and fuel mileage, a bit

http://67-72chevytrucks.com/vboard/s...63698&page=108

here is a link to a tire size chart with a visual comparison tab and several other tabs. maybe come in handy for you.

https://tiresize.com/comparison/
His truck looks great! I think I want to find some FJ cruiser 17" steelies to roll around on for a while, but they are tough to find

Ill keep that tire profile in mind once I track a set down
__________________
1959 Apache Fleetside Short Bed
BLAC is offline   Reply With Quote
Old 12-14-2018, 07:23 PM   #32
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,746
Re: 1959 Fleetside Short Bed Project

Quote:



looks like a fine roadkill skinner!
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 12-14-2018, 10:16 PM   #33
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,773
Re: 1959 Fleetside Short Bed Project

after it is all back together and you've had a chance to set the springs, if you still don't like the ride height, you could get spring mounting pads welded to the underside of the axle and that would gain you a little. the problem is the axle may bottom out on the oil pan or the frame if you get it too low.
dsraven is offline   Reply With Quote
Old 01-04-2019, 04:06 PM   #34
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

I found a set of fender emblems and a hood emblem
Time to get to work on the cab corner and the rear c-notch + axle flip... so i pulled the bed off.

I decided to pull of the individual panels since I will be doing some bodywork on them and it makes them a bit more manageable when they aren't one huge unit.

How its sitting with no motor on a dropped axel:

Time to break down..

__________________
1959 Apache Fleetside Short Bed

Last edited by BLAC; 01-04-2019 at 04:11 PM.
BLAC is offline   Reply With Quote
Old 01-04-2019, 04:06 PM   #35
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

Anyone in the LA area have any leads on a set of the 20" dodge steelies?
__________________
1959 Apache Fleetside Short Bed
BLAC is offline   Reply With Quote
Old 01-06-2019, 02:20 AM   #36
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

Or the 17" Fj Cruiser's
__________________
1959 Apache Fleetside Short Bed
BLAC is offline   Reply With Quote
Old 01-10-2019, 05:05 AM   #37
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

a 6.0 LS followed me home
__________________
1959 Apache Fleetside Short Bed
BLAC is offline   Reply With Quote
Old 01-10-2019, 10:54 AM   #38
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,773
Re: 1959 Fleetside Short Bed Project

mom, it followed me home. can I keep it?
darn 6.0's, they think they own the place, lol.
nice snag. trans too?
dsraven is offline   Reply With Quote
Old 01-10-2019, 01:58 PM   #39
BAM55
Registered User
 
BAM55's Avatar
 
Join Date: Jan 2016
Location: Inglewood, CA
Posts: 324
Re: 1959 Fleetside Short Bed Project

Nice, now if only I can get one to follow me home.
BAM55 is offline   Reply With Quote
Old 01-10-2019, 02:24 PM   #40
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

Haha I was looking online REALLY frequently and when I saw the add go up for this one I snagged it before it was even an hour old just gotta set up some alerts, good deals don't last long in our neck of the woods!

Question for y'all, I didn't buy the trans the guy had with it so I'm still looking... I have my eyes on a TR6060 from a 2011 Camaro with 25k miles on it... anyone ran one of these transmissions?
__________________
1959 Apache Fleetside Short Bed

Last edited by BLAC; 01-10-2019 at 02:38 PM.
BLAC is offline   Reply With Quote
Old 01-11-2019, 10:29 AM   #41
DA68
Registered User
 
Join Date: Oct 2006
Location: Ohio
Posts: 967
Re: 1959 Fleetside Short Bed Project

Lookin’ good, man. Where did you find that front axle? I’m getting ready to send mine to Sid’s to get stretched, but thought I’d ask.
DA68 is offline   Reply With Quote
Old 01-11-2019, 04:00 PM   #42
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

Quote:
Originally Posted by DA68 View Post
Lookin’ good, man. Where did you find that front axle? I’m getting ready to send mine to Sid’s to get stretched, but thought I’d ask.
I actually got really lucky and found it second hand but seemingly unused. Its made by CPP.

A guy had a shop install it then decide to go IFS, I'm not sure he even drove on it since the brake pads and rotors are unscuffed
__________________
1959 Apache Fleetside Short Bed
BLAC is offline   Reply With Quote
Old 02-01-2019, 02:52 AM   #43
wally_245
Registered User
 
Join Date: Jun 2015
Location: Thousand Oaks, CA
Posts: 16
Re: 1959 Fleetside Short Bed Project

Nice truck, definitely subscribing. I work in Culver (across from the giant hole in the ground that used to be Culver Studios).
wally_245 is offline   Reply With Quote
Old 02-01-2019, 12:51 PM   #44
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

Quote:
Originally Posted by wally_245 View Post
Nice truck, definitely subscribing. I work in Culver (across from the giant hole in the ground that used to be Culver Studios).
Awesome, you are just a couple blocks from me. Ill have updates soon =)
__________________
1959 Apache Fleetside Short Bed
BLAC is offline   Reply With Quote
Old 02-20-2019, 09:58 AM   #45
Mains52
Registered User
 
Join Date: Jun 2016
Location: Knoxville, Illinois
Posts: 328
Re: 1959 Fleetside Short Bed Project

Sweet Truck. Coming along nicely!!
Mains52 is offline   Reply With Quote
Old 02-21-2019, 11:14 PM   #46
FAKKY
Registered User
 
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,312
Re: 1959 Fleetside Short Bed Project

In for a penny :0
Nice truck.

What was the 6.0 out of ? Year etc.

I wonder if you could "shorten" the front leaf hangers by an inch to drop it further making the body closer to the ground.
__________________
FAKKY 57 PANEL BUILD
FAKKY is offline   Reply With Quote
Old 03-01-2019, 07:13 PM   #47
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

Quote:
Originally Posted by FAKKY View Post
In for a penny :0
Nice truck.

What was the 6.0 out of ? Year etc.

I wonder if you could "shorten" the front leaf hangers by an inch to drop it further making the body closer to the ground.
Thanks! the motor is from a 2002 Denali
__________________
1959 Apache Fleetside Short Bed
BLAC is offline   Reply With Quote
Old 03-01-2019, 07:43 PM   #48
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

getting ready to mock up mounts for the motor and trans (I bought a 6-speed TR6060 from a 2011 Camaro SS)


Got the inner cab corner shaped and welded up, then coated in rust encapsulator


Outer cab corner cut, shaped and ready for welding


The corner I bought was too thick through this area in the door jam so I took a slice out of it and patched it in.
__________________
1959 Apache Fleetside Short Bed

Last edited by BLAC; 03-01-2019 at 08:23 PM.
BLAC is offline   Reply With Quote
Old 03-02-2019, 05:36 PM   #49
Dan in Pasadena
Senior Member

 
Dan in Pasadena's Avatar
 
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,330
Re: 1959 Fleetside Short Bed Project

I would also say if you want to get lower to wait til the engine, trans and all fluids are in it - then drive a bit to let everything settle.

If it's STILL too tall for you skip all the shenanigans with flipping the main leaf or screwing with the spring mounting pad and just go with Posie's Super Sliders. They offer up to 3" lowering (I think) BUT remember that dimension is from original stock height and your stock springs have ALREADY settled inches since new.

Having said all this, why go through all this work and expense and later lose it all by switching to IFS? I was going to do exactly the same you're doing until I realized the cost of the dropped straight axle, Super Sliders and power steering kit would almost be the same as a good quality IFS kit.

PS: My engine is an LQ4. Is yours or an LQ9? Mine's from a 2011 (if I remember right) N Series Isuzu delivery van and has the 4l85e trans behind it.
__________________
'55 Big Window Shortbed,
Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's

Dan's '55 Big Window "Build" - Well, Kinda!
Dan in Pasadena is offline   Reply With Quote
Old 03-04-2019, 06:52 PM   #50
BLAC
Registered User
 
BLAC's Avatar
 
Join Date: Dec 2018
Location: Culver City, CA
Posts: 62
Re: 1959 Fleetside Short Bed Project

Quote:
Originally Posted by Dan in Pasadena View Post
I would also say if you want to get lower to wait til the engine, trans and all fluids are in it - then drive a bit to let everything settle.

If it's STILL too tall for you skip all the shenanigans with flipping the main leaf or screwing with the spring mounting pad and just go with Posie's Super Sliders. They offer up to 3" lowering (I think) BUT remember that dimension is from original stock height and your stock springs have ALREADY settled inches since new.

Having said all this, why go through all this work and expense and later lose it all by switching to IFS? I was going to do exactly the same you're doing until I realized the cost of the dropped straight axle, Super Sliders and power steering kit would almost be the same as a good quality IFS kit.

PS: My engine is an LQ4. Is yours or an LQ9? Mine's from a 2011 (if I remember right) N Series Isuzu delivery van and has the 4l85e trans behind it.
I am definitely going to wait to do anything until I get the motor and trans in the truck and everything is settled.

I was going to just jump into the IFS but I got a practically brand new CPP dropped axel, disk brake conversion, power steering box, new leafs, shocks, and all hardware for $550. I just couldn't pass on the deal.

Mine is an lq4, but the only difference is the pistons and i'm going to do a forged rotating assembly anyway
__________________
1959 Apache Fleetside Short Bed
BLAC is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com