Neat Cupholder Idea for Factory Seat Guys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cstanley · 08-15-2006, 12:58 AM

Well, i think it's pretty neat. i just finished it tonight.

i used to have a ford seat that had a removable plastic cup holder. i really liked it, but i got rid of the seat. with the freshly rebuilt, reupholstered original front seat, i needed a replacement cupholder (yesterday i managed to catch an entire HOT 16 oz. cup of coffee using only my lap and my freshly reupholstered seat.

it was originally sitting on that wonderful cupholder also known as the dashboard.) anyway, i went out tonight and grabbed one off the shelf, along with a few metal braces from Lowe's, and wound up with a pretty neat solution.

i got the cupholder from autozone. it's made by a local company, so i don't know what everyone's access might be. it's called the wedgie, (thanks orange) about $5.
then i picked up a pack of 3-1/2" x 3/4" angle braces and an 8" x 1" *i think* strap. the neat thing is that it was cheap, looks OK, and is removable.

cstanley · 08-15-2006, 01:12 AM

the cool part was the way all the dimensions worked out. i used existing holes in the bottom of the seat frame (where the hog rings go) so no drilling was required, and no damage was incurred by the seat and upholstery. the holes were 8" apart, and just happened to be centered on the width of the seat. then, the holes matched up on the braces and the metal strap, which was also 8" apart. then, the mounting slots on the cupholder happened to be 8" o.c. i couldn't have planned it better from scratch.

i cut slots for the braces in the bottom of the cupholder and bent the very top of the braces out, to faciltate easy removal, while i bent the entire brace back toward the seat, to clamp and hold the cupholder.

i only had to drill a hole in each brace for the bolts to go through the seat frame at the hog rings. it worked out great. the pic below shows the slot i cut for the braces.

JameslovesJammie · 08-15-2006, 01:14 AM

I have that cupholder in my Oldsmobile. Actually, I like it more than the one that was factory in the center console.

cstanley · 08-15-2006, 01:15 AM

and with the cupholder removed.

all in all, i think it turned out ok. in the future, i might apply an upholstered wrap to finish it off. i have about $10 and 30 min. in this

cstanley · 08-15-2006, 01:29 AM

Quote:

Originally Posted by JameslovesJammie

I have that cupholder in my Oldsmobile. Actually, I like it more than the one that was factory in the center console.

that's promising! i haven't tried it out yet, but i'm looking forward to it.

JameslovesJammie · 08-15-2006, 01:37 AM

I've got a split bench and just slipped it in between the two seats. What I really like about it is that there is a cupholder for me AND my wife. This means that I don't accidentally drink her nasty beverage by accident!

al's71gmc · 08-15-2006, 06:39 AM

Nice job and great pics. I can't even get to the parts store and back in 30 minutes!

**Palf70Step** · 08-15-2006, 07:46 AM

Very neat idea. Thanks for the photos and description.

thejoker · 08-15-2006, 08:13 AM

Nice job and good how-to. Pictures are great too.

JKR

Orange · 08-15-2006, 10:14 AM

Quote:

Originally Posted by cstanley

i got the cupholder from autozone. it's made by a local company, so i don't know what everyone's access might be. it's called the wedge, about $5.

It's "The Wedgie". Bad memories.

I went to looking for the wedge and couldn't find anything, but evntually found "The Wedgie"...

If you can't pick it up local - here's a couple of options folks.

http://www.autobarn.net/wedautcup.html
http://www.midwayautosupply.com/deta...tion.asp?10656

TSI has some other nice products as well...
http://www.saddlebags.com/Default.aspx?tabid=39

SB406 · 08-15-2006, 11:45 AM

Ahhh....the days when a truck was a truck and didn't have cup holders...
nice idea though.

Ever notice the cup holder indents on the back side of the glove box lid? Works great at the Drive-In

.....Bad While driving

cstanley · 08-15-2006, 12:44 PM

Quote:

Originally Posted by Orange

TSI has some other nice products as well...
http://www.saddlebags.com/Default.aspx?tabid=39

yeah, i liked that #101 and #102. i thought about building one similar, but i just went ahead with the Wedgie (thanks for the correction) because it's easier to store if the little lady wants to sit in the middle. "it's got a bench seat, baby. you don't have to sit over there!"

incoma · 08-15-2006, 01:59 PM

Outstanding idea. I like the ability to remove it too, so you could throw it in the dishwasher when you open that coke that spews everywhere too.

And an added bonus, you don't have to use the ashtray for your change too. This way I could turn my ashtray door into a cd carriage....

cstanley · 08-15-2006, 03:34 PM

Quote:

Originally Posted by incoma

Outstanding idea. I like the ability to remove it too, so you could throw it in the dishwasher when you open that coke that spews everywhere too.

And an added bonus, you don't have to use the ashtray for your change too. This way I could turn my ashtray door into a cd carriage....

sweet idea. you can leave your original radio, install a cd drive in the ashtray slot, and be good to go!

corn · 08-15-2006, 11:40 PM

Id like to get one & do that to my 89. Cool idea, thanks...

Terminus · 08-16-2006, 03:28 PM

I did the ash tray modification. The ash tray holder is pretty cool, but I think I like your idea better. Nice job!

2bits · 09-14-2007, 06:46 PM

Definitely cool, I'm going searching tonight locally and it is really nice to see links just in case! Excellent!

70GMCer · 09-14-2007, 06:55 PM

J.C. Whitney sells them........

corn · 09-14-2007, 07:51 PM

Wow, this is an old thread... I got mine at wally world for less than $5.

72armyswbtruck · 09-14-2007, 10:44 PM

Nice pics and how to.

cory321 · 09-15-2007, 10:08 PM

I will have to try that.My uncle always makes fun of me when i complain about not having any cupholders

72GMC51 · 09-16-2007, 09:30 AM

Autozone carriers them made buy BELL (5.98), I installed one in my 91 Z "Wedgie"

it between the seat and councel.
John

truknut · 10-13-2007, 09:25 PM

Thanks for the idea. I just finished mine tonight. Haven't had a chance to see how good it works, I'm sure I'll like it. Thanks again, I been needing a cup holder.

wibilly · 10-14-2007, 12:16 AM

nice clean install. i want a wedgie

Kool K5 · 10-14-2007, 05:11 PM

For anyone in Canada that wants one, we carry them at Canadian Tire

Evan

08-15-2006, 01:12 AM	#2
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: Neat Cupholder Idea for Factory Seat Guys the cool part was the way all the dimensions worked out. i used existing holes in the bottom of the seat frame (where the hog rings go) so no drilling was required, and no damage was incurred by the seat and upholstery. the holes were 8" apart, and just happened to be centered on the width of the seat. then, the holes matched up on the braces and the metal strap, which was also 8" apart. then, the mounting slots on the cupholder happened to be 8" o.c. i couldn't have planned it better from scratch. i cut slots for the braces in the bottom of the cupholder and bent the very top of the braces out, to faciltate easy removal, while i bent the entire brace back toward the seat, to clamp and hold the cupholder. i only had to drill a hole in each brace for the bolts to go through the seat frame at the hog rings. it worked out great. the pic below shows the slot i cut for the braces. Attached Images __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/ Last edited by cstanley; 08-15-2006 at 03:35 PM.

08-15-2006, 01:14 AM	#3
JameslovesJammie God Bless Mr. T Join Date: Apr 2004 Location: Minot, ND Posts: 348	Re: Neat Cupholder Idea for Factory Seat Guys I have that cupholder in my Oldsmobile. Actually, I like it more than the one that was factory in the center console. __________________ Like a midget at a urinal...sometimes you must stay on your toes.

08-15-2006, 01:15 AM	#4
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: Neat Cupholder Idea for Factory Seat Guys and with the cupholder removed. all in all, i think it turned out ok. in the future, i might apply an upholstered wrap to finish it off. i have about $10 and 30 min. in this Attached Images __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/ Last edited by cstanley; 08-15-2006 at 01:29 AM.

08-15-2006, 01:37 AM	#6
JameslovesJammie God Bless Mr. T Join Date: Apr 2004 Location: Minot, ND Posts: 348	Re: Neat Cupholder Idea for Factory Seat Guys I've got a split bench and just slipped it in between the two seats. What I really like about it is that there is a cupholder for me AND my wife. This means that I don't accidentally drink her nasty beverage by accident! __________________ Like a midget at a urinal...sometimes you must stay on your toes.

08-15-2006, 06:39 AM	#7
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: Neat Cupholder Idea for Factory Seat Guys Nice job and great pics. I can't even get to the parts store and back in 30 minutes! __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

08-15-2006, 12:58 AM	#1
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Neat Cupholder Idea for Factory Seat Guys Well, i think it's pretty neat. i just finished it tonight. i used to have a ford seat that had a removable plastic cup holder. i really liked it, but i got rid of the seat. with the freshly rebuilt, reupholstered original front seat, i needed a replacement cupholder (yesterday i managed to catch an entire HOT 16 oz. cup of coffee using only my lap and my freshly reupholstered seat. it was originally sitting on that wonderful cupholder also known as the dashboard.) anyway, i went out tonight and grabbed one off the shelf, along with a few metal braces from Lowe's, and wound up with a pretty neat solution. i got the cupholder from autozone. it's made by a local company, so i don't know what everyone's access might be. it's called the wedgie, (thanks orange) about $5. then i picked up a pack of 3-1/2" x 3/4" angle braces and an 8" x 1" i think strap. the neat thing is that it was cheap, looks OK, and is removable. Attached Images __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/ Last edited by cstanley; 08-15-2006 at 12:45 PM.

08-15-2006, 07:46 AM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,634	Re: Neat Cupholder Idea for Factory Seat Guys Very neat idea. Thanks for the photos and description. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

08-15-2006, 08:13 AM	#9
thejoker Registered User Join Date: Jun 2005 Location: Gulfport Mississippi Posts: 364	Re: Neat Cupholder Idea for Factory Seat Guys Nice job and good how-to. Pictures are great too. JKR __________________ **Have you ever danced with the devil in the pale moonlight....I ask that of all my prey** 68' C10 Short Step (rebuilding as we speak) 72' Custom Camper (wrecked, parting out) 79' C10 Fleet (rough, parting out) 97' C1500 Short Step Custom (DD) 97' Kawaski VN800a Customized 99' Z71 Silverado 04' Suzuki Volusia

08-15-2006, 11:45 AM	#11
SB406 FORD is a 4 letter word. Join Date: Feb 2006 Location: Western NY Posts: 99	Re: Neat Cupholder Idea for Factory Seat Guys Ahhh....the days when a truck was a truck and didn't have cup holders... nice idea though. Ever notice the cup holder indents on the back side of the glove box lid? Works great at the Drive-In .....Bad While driving __________________ '71 406 GMC Short Box Fleetside - Daily Driver '79 350 Chevy K-5 Blazer - On-going Project (Mudder)www.wnyoffroad.com '58 LT1 Chevy Short Box Step Side - Next Project

08-15-2006, 01:59 PM	#13
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: Neat Cupholder Idea for Factory Seat Guys Outstanding idea. I like the ability to remove it too, so you could throw it in the dishwasher when you open that coke that spews everywhere too. And an added bonus, you don't have to use the ashtray for your change too. This way I could turn my ashtray door into a cd carriage.... __________________ "Green Monster" (Red Sox fan) 1970 GMC survivor, 350/200 4R, 3.42 rear gears, 2.5/4 drop, ECE disc brake conversion, powder coated suspension

08-15-2006, 11:40 PM	#15
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Neat Cupholder Idea for Factory Seat Guys Id like to get one & do that to my 89. Cool idea, thanks...

08-16-2006, 03:28 PM	#16
Terminus Registered User Join Date: Sep 2005 Location: Boise, Idaho Posts: 17	Re: Neat Cupholder Idea for Factory Seat Guys I did the ash tray modification. The ash tray holder is pretty cool, but I think I like your idea better. Nice job!

09-14-2007, 06:46 PM	#17
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: Neat Cupholder Idea for Factory Seat Guys Definitely cool, I'm going searching tonight locally and it is really nice to see links just in case! Excellent! __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

09-14-2007, 06:55 PM	#18
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Neat Cupholder Idea for Factory Seat Guys J.C. Whitney sells them........ __________________ 1997 GMC Sierra Ext 1965 Mustang

09-14-2007, 07:51 PM	#19
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Neat Cupholder Idea for Factory Seat Guys Wow, this is an old thread... I got mine at wally world for less than $5.



Register or Log In To remove these advertisements.

09-14-2007, 10:44 PM	#20
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Neat Cupholder Idea for Factory Seat Guys Nice pics and how to. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

09-15-2007, 10:08 PM	#21
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Re: Neat Cupholder Idea for Factory Seat Guys I will have to try that.My uncle always makes fun of me when i complain about not having any cupholders __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

09-16-2007, 09:30 AM	#22
72GMC51 72GMC51 Join Date: Jul 2004 Location: Minnesota Posts: 233	Re: Neat Cupholder Idea for Factory Seat Guys Autozone carriers them made buy BELL (5.98), I installed one in my 91 Z "Wedgie" it between the seat and councel. John __________________ 72 GMC 2wd 1/2 long 350 700r4 A/C PS PB 4:10. Are they ever really finished

10-13-2007, 09:25 PM	#23
truknut Registered User Join Date: Oct 2005 Location: Florence, AL (NW Alabama) Posts: 309	Re: Neat Cupholder Idea for Factory Seat Guys Thanks for the idea. I just finished mine tonight. Haven't had a chance to see how good it works, I'm sure I'll like it. Thanks again, I been needing a cup holder. __________________ 1990 Chevy Silverado (My DD) 1978 Chevy Bonanza LWB (My LWB to SWB 1 day project) 2015 Hyundai Sonata (Wife's DD)

10-14-2007, 12:16 AM	#24
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: Neat Cupholder Idea for Factory Seat Guys nice clean install. i want a wedgie __________________ common sense isn't so common anymore

10-14-2007, 05:11 PM	#25
Kool K5 Registered User Join Date: Sep 2006 Location: Niverville, Mb Posts: 88	Re: Neat Cupholder Idea for Factory Seat Guys For anyone in Canada that wants one, we carry them at Canadian Tire Evan __________________ 70 Blazer 4x4 305/sm465/np205 80 Buick LeSabre Limited 72 Honda CB350F 77 Honda Cb750K 00 Ducati Monster M900ie

Register or Log In To remove these advertisements.