new gauge panel - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Canadian694x4** · 11-02-2003, 08:26 PM

diamond plate...anyone got pics of ones made of that?

Dean23 · 11-02-2003, 10:04 PM

what size are your small guages
i have a set of phantoms and i have the 25/8 for the small ones and 5" for the bigs

Dean23 · 11-02-2003, 10:10 PM

i like this one from brothers
http://www.brothersonlinestore.com/images/cgp6772.jpg

lost wages · 11-03-2003, 12:53 AM

the gauges are 2 5/8 and 5 inch.

jay-dawg · 11-03-2003, 03:45 AM

looking good there lost....now where's the pics of the rest of the truck?

jay

Church · 11-03-2003, 09:24 AM

Hey Lost,
Have you mounted the No Limit instr. cluster in your dash yet?
A local customer had to cut the tabs on the truck that hold the wiper switch and headlight switches completely off so the cluster would fit correctly. What did you have to do?
I looked into making the glovebox doors and matching clusters but when I saw how much No Limit is selling theirs for it is not worth it. That is a really good buy for what your getting.
It totally replaces the stock plastic dash all together.
I'll be installing one in my truck next year.

lost wages · 11-03-2003, 02:49 PM

the truck is still in the paint shop with the wagon wheels on it so i dont have any good pics yet, i will soon hopefully, i did have to cut the dash where the stock switches stick up, no big deal since i did it before the interior was painted, its going to look really nice above the flaming river column i have.

lost wages · 11-03-2003, 02:55 PM

heres how it looks now in the body shop, its going to be viper silver.

lost wages · 11-03-2003, 02:57 PM

the entire truck is edged in, interior is painted just finishing up a few things on the body before paint.

lost wages · 11-03-2003, 02:58 PM

4 link

Mudder · 11-03-2003, 03:00 PM

Someone has taken your door handles..........

lost wages · 11-03-2003, 03:48 PM

hey mudder i worked with a guy from owensville the other day that said he knew you, i dont remember his name but i think he worked at mmg, or graphics something, said he used to go to mud runs with you.

landon4421 · 11-03-2003, 04:21 PM

Look great IMO !

Dean23 · 11-03-2003, 09:10 PM

wow look at that its a wheel stander...lol
looks sharp cant wait to see the finished project

**FRENCHBLUE72** · 11-03-2003, 10:07 PM

Look's like another killer truck on it's way to completion..

**1971Stepside** · 11-04-2003, 12:22 AM

It really isn't doing a wheel stander. Wages had a few too many latte's and put the front air bags on the bottom of the a-arms instead of the top. He thinks it looks cool that way........

After the french vanilla wears off I'm sure he will correct it so that it lays frame again.

lost wages · 11-04-2003, 01:43 AM

i like it better that way, its like the jack system the indy cars use.

jay-dawg · 11-04-2003, 12:18 PM

drool!!! looking good there.

jay

guitarornothin · 11-04-2003, 06:51 PM

WHAT ABOUT the windshild wipers and lights???

???

guitarornothin · 11-04-2003, 06:53 PM

SORRY WRONG THREAD

guitarornothin · 11-04-2003, 06:55 PM

i guess this is the right one...

What about the windshild wiper knob and headlight knob on that dash bezel???????

**FRENCHBLUE72** · 11-04-2003, 08:45 PM

If you look you can see the 2 hole's for the switch's to pass threw on each bottom corner of the pannel..

Denny · 11-04-2003, 08:54 PM

Looking real good Lost Wages

I love that new bezel and your truck is sharp. Can't wait to see the pictures when its done.

guitarornothin · 11-16-2003, 05:42 PM

Quote:

Originally posted by FRENCHBLUE72
If you look you can see the 2 hole's for the switch's to pass threw on each bottom corner of the pannel..

Thank you i see it now. i like that. i think ill buy one for my truck.

and heres the link to:

No Limit Engineering
http://www.parts123.com/PartFrame.as...mitEngineering Just search for dash and press enter.

NICe DASH

jugernot · 11-16-2003, 08:05 PM

I like it. Looks really nice. I will stay with the stock look.

11-02-2003, 08:26 PM	#26
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	diamond plate...anyone got pics of ones made of that? __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

11-02-2003, 10:04 PM	#27
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	what size are your small guages i have a set of phantoms and i have the 25/8 for the small ones and 5" for the bigs __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

11-02-2003, 10:10 PM	#28
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	i like this one from brothers http://www.brothersonlinestore.com/images/cgp6772.jpg __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

11-03-2003, 03:45 AM	#30
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	looking good there lost....now where's the pics of the rest of the truck? jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

11-03-2003, 09:24 AM	#31
Church Carolina Classic Trucks Join Date: Jan 2000 Location: The South Posts: 792	Hey Lost, Have you mounted the No Limit instr. cluster in your dash yet? A local customer had to cut the tabs on the truck that hold the wiper switch and headlight switches completely off so the cluster would fit correctly. What did you have to do? I looked into making the glovebox doors and matching clusters but when I saw how much No Limit is selling theirs for it is not worth it. That is a really good buy for what your getting. It totally replaces the stock plastic dash all together. I'll be installing one in my truck next year. __________________

11-03-2003, 12:53 AM	#29
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	the gauges are 2 5/8 and 5 inch.

11-03-2003, 02:49 PM	#32
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	the truck is still in the paint shop with the wagon wheels on it so i dont have any good pics yet, i will soon hopefully, i did have to cut the dash where the stock switches stick up, no big deal since i did it before the interior was painted, its going to look really nice above the flaming river column i have.

11-03-2003, 02:55 PM	#33
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	heres how it looks now in the body shop, its going to be viper silver. Attached Images

11-03-2003, 02:57 PM	#34
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	the entire truck is edged in, interior is painted just finishing up a few things on the body before paint. Attached Images

11-03-2003, 02:58 PM	#35
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	4 link Attached Images

11-03-2003, 03:00 PM	#36
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,339	Someone has taken your door handles..........

11-03-2003, 03:48 PM	#37
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	hey mudder i worked with a guy from owensville the other day that said he knew you, i dont remember his name but i think he worked at mmg, or graphics something, said he used to go to mud runs with you.

11-03-2003, 04:21 PM	#38
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Look great IMO ! __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

11-03-2003, 09:10 PM	#39
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	wow look at that its a wheel stander...lol looks sharp cant wait to see the finished project __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

11-03-2003, 10:07 PM	#40
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Look's like another killer truck on it's way to completion.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

11-04-2003, 12:22 AM	#41
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	It really isn't doing a wheel stander. Wages had a few too many latte's and put the front air bags on the bottom of the a-arms instead of the top. He thinks it looks cool that way........ After the french vanilla wears off I'm sure he will correct it so that it lays frame again. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

11-04-2003, 01:43 AM	#42
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	i like it better that way, its like the jack system the indy cars use.

11-04-2003, 12:18 PM	#43
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	drool!!! looking good there. jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

11-04-2003, 06:51 PM	#44
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	WHAT ABOUT the windshild wipers and lights?????? __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

11-04-2003, 06:53 PM	#45
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	SORRY WRONG THREAD __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

11-04-2003, 06:55 PM	#46
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	i guess this is the right one... What about the windshild wiper knob and headlight knob on that dash bezel??????? __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

11-04-2003, 08:45 PM	#47
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	If you look you can see the 2 hole's for the switch's to pass threw on each bottom corner of the pannel.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-04-2003, 08:54 PM	#48
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	Looking real good Lost Wages I love that new bezel and your truck is sharp. Can't wait to see the pictures when its done. __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines

11-16-2003, 08:05 PM	#50
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	I like it. Looks really nice. I will stay with the stock look.

Register or Log In To remove these advertisements.