67 chevy/gmc hub caps??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

-dylan-(OO==|==OO) · 09-28-2010, 08:56 PM

i have a 67 gmc truck and i am looking for some factory 67 hub caps. I would like to have some gmc ones. If any one knows who reproduces these or know where i can find them let me kno thx.

**special-K** · 09-28-2010, 11:40 PM

They aren't reproduced.You'll have to do the search high 'n' low on these.Naturally,the GMCs will be a tougher find.Hubcaps came in painted steel or polished stainless.Then there were the wheelcovers in polished stainless,too.

67chevy1series · 09-28-2010, 11:45 PM

i have one cst or custom full wheel cap gmc but i cannot sell it bescauce i am not a preimium member

-dylan-(OO==|==OO) · 09-29-2010, 02:52 PM

o ok .. looks like imma be saerchin for them for a while lol

LandonL · 09-29-2010, 04:08 PM

I have a full set on my truck, trust me, they are NEAR IMPOSSIBLE to find. The ones I have were already on it, thank god my great grandpa didn't lose any. Check ebay, you can usually find about one every month or so. Look for 67 and 68 there "almost" the same. '67 gmc painted ones were usually white with black lettering or chrome with black lettering. '68 had white I believe with red, or chrome with red lettering.
Theres one on ebay now, (not mine):
http://cgi.ebay.com/ebaymotors/1966-...#ht_1329wt_939

68gmsee · 09-29-2010, 05:29 PM

Here's what you're looking for in th 68 GMC cap. Found this one after a hard 6 month's search.

-dylan-(OO==|==OO) · 09-29-2010, 06:12 PM

yea those are the ones i am wanting... lol imma be looking for a while!!! cant wait to get some on mine!!!

Slammed67 · 10-04-2010, 11:50 PM

I may be the reason you can't find any

Four of these were original to the '67 GMC I have. The rest I found on eBay over the past 6 or 7 years. Sadly, out of all of them, most of them are dented. The nicest ones I have (some of which are NOS) have an inner ring attached to the rear of the cap (see the left cap in the picture on the left). Anyone know what type of wheels those fit?

**70cst** · 10-04-2010, 11:57 PM

Quote:

Originally Posted by Slammed67

I may be the reason you can't find any

Four of these were original to the '67 GMC I have. The rest I found on eBay over the past 6 or 7 years. Sadly, out of all of them, most of them are dented. The nicest ones I have (some of which are NOS) have an inner ring attached to the rear of the cap (see the left cap in the picture on the left). Anyone know what type of wheels those fit?

WOW!!!

*Shane* · 10-05-2010, 08:21 AM

Quote:

Originally Posted by Slammed67

I may be the reason you can't find any

Four of these were original to the '67 GMC I have. The rest I found on eBay over the past 6 or 7 years?

attaboy!

-dylan-(OO==|==OO) · 10-10-2010, 09:10 AM

yea i would say thats why i cant find any.... lol WOw wish i had a set of those haha

raycow · 10-10-2010, 03:32 PM

Quote:

Originally Posted by Slammed67

The nicest ones I have (some of which are NOS) have an inner ring attached to the rear of the cap (see the left cap in the picture on the left). Anyone know what type of wheels those fit?

I believe that fits the earlier wheels that have spring clips instead of humps. The wheels changed sometime around the early 60s.

Ray

67chevy1series · 12-30-2010, 05:56 PM

i was told 64 impala rims would work for those

19553100 · 12-30-2010, 08:59 PM

I thought you meant a full hubcap.

I'd love to find some nice original '67 CST spares.

50bomb · 12-30-2010, 09:00 PM

In order for those Original caps to fit does the wheels have to be the ones with the clips on them? like original steelies with clips. Those steelies are gonna be hard to find if i want the Original caps too. Same goes with the full cap. I actually leaning towards the full caps over the small.

*sharpie1972* · 12-30-2010, 09:51 PM

1/2 ton dog dish caps fit nub wheels, 3/4 ton caps need the clips, they are the caps with the extra stepped metal piece on the back. Sharpie

75gmc454 · 12-30-2010, 10:27 PM

Here is another question.

What did the cst and super custom 4x4's have for a hubcap in a half ton?

factorystock · 12-30-2010, 10:39 PM

Beware of 60's hubcaps, 1/2 ton and 3/4 ton caps look the same from the front, but the back side measurements are different. 3/4 ton caps take an inner ring of 8 3/4" I.D. ( heavy duty 1/2 tons take caps with innner rings at 7 3/4" I.D. ). This necessary to attach to wheel clips. Normal light duty 1/2 tons use the common 10 1/4" I.D. bump style caps. During the 60's 6 lug 1/2 tons came with both the standard bump wheel and wheels with clips.

**special-K** · 12-30-2010, 10:45 PM

Quote:

Originally Posted by 67chevy1series

i was told 64 impala rims would work for those

Could you clarify? I'm confused. I see you brought this thread back from October and I wonder what you are referring to. I know '64 Impala,or any '64 Chevy full-size, wheel is not unique and that the outer nub car and truck caps interchange.

67chevy1series · 12-30-2010, 10:57 PM

i was told that the clips style hub caps fit the 62 impala rims sorry i got that wrong

**Joesjunk** · 12-31-2010, 12:34 AM

I have a mint set of 4 painted 67 gmc ones. Ill get a pic tomorrow if interested, $200.00

**special-K** · 12-31-2010, 11:24 AM

Quote:

Originally Posted by 67chevy1series

i was told that the clips style hub caps fit the 62 impala rims sorry i got that wrong

Oh,ok. Thanks for clarifying. But,I'm pretty sure the clip style hasn't been used on cars since the early '50s and cars have the smaller bolt pattern anyway.

srvivor71 · 12-31-2010, 11:57 AM

I'm waiting for my 4th and final (cherry condition) 71 GMC hubcap to arrive now (maybe even today). The first three I got, one by one, on e-bay, the 4th I got from networking on this forum. I'm also about to close the deal on a clean set of OEM type rims (with the nubs for the hubcaps), which I searched for on E-Bay but ended up finding here, just from networking with all the people who are happy to help.

I had saved searches on e-bay that sent me an e-mail every time a new item was listed that matched my search. I started my search for rims and caps in September and (unless something goes wrong) will now have a full set of OEM shoes to replace my white "wagon wheels". Just stay with it and eventually it will all come together. Good luck!

**Tim Christian** · 12-31-2010, 12:01 PM

I have 4-NOS ones like in 68gmsee picture but mine are the stainless steel ones $400.00 shipped

09-28-2010, 08:56 PM	#1
-dylan-(OO==\|==OO) I dont drive fast,, I fly low! Join Date: May 2010 Location: sheperdsville KY Posts: 118	67 chevy/gmc hub caps??? i have a 67 gmc truck and i am looking for some factory 67 hub caps. I would like to have some gmc ones. If any one knows who reproduces these or know where i can find them let me kno thx. __________________ ____________ /_______\ (OO==\|\|==OO) 67 GMC CUSTOM,72 GMC...65 chevelle...65 fastback mustang...75 VEGA...90 lx mustang...90 supercoupe...90 jeep wrangler...04 mach 1 mustang...06 toyota tacoma...08 nissan altima

09-28-2010, 11:40 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 67 chevy/gmc hub caps??? They aren't reproduced.You'll have to do the search high 'n' low on these.Naturally,the GMCs will be a tougher find.Hubcaps came in painted steel or polished stainless.Then there were the wheelcovers in polished stainless,too. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-28-2010, 11:45 PM	#3
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 chevy/gmc hub caps??? i have one cst or custom full wheel cap gmc but i cannot sell it bescauce i am not a preimium member

09-29-2010, 02:52 PM	#4
-dylan-(OO==\|==OO) I dont drive fast,, I fly low! Join Date: May 2010 Location: sheperdsville KY Posts: 118	Re: 67 chevy/gmc hub caps??? o ok .. looks like imma be saerchin for them for a while lol __________________ ____________ /_______\ (OO==\|\|==OO) 67 GMC CUSTOM,72 GMC...65 chevelle...65 fastback mustang...75 VEGA...90 lx mustang...90 supercoupe...90 jeep wrangler...04 mach 1 mustang...06 toyota tacoma...08 nissan altima

09-29-2010, 04:08 PM	#5
LandonL Registered User Join Date: Nov 2009 Location: Georgia Posts: 440	Re: 67 chevy/gmc hub caps??? I have a full set on my truck, trust me, they are NEAR IMPOSSIBLE to find. The ones I have were already on it, thank god my great grandpa didn't lose any. Check ebay, you can usually find about one every month or so. Look for 67 and 68 there "almost" the same. '67 gmc painted ones were usually white with black lettering or chrome with black lettering. '68 had white I believe with red, or chrome with red lettering. Theres one on ebay now, (not mine): http://cgi.ebay.com/ebaymotors/1966-...#ht_1329wt_939 __________________ ---\| 1967 GMC Stepside \|-- 250 L6 .030 over ---\| 1985 Porsche 944/1 \|--- Build Thread: '67 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=378640 Last edited by LandonL; 09-29-2010 at 04:08 PM.

09-29-2010, 05:29 PM	#6
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: 67 chevy/gmc hub caps??? Here's what you're looking for in th 68 GMC cap. Found this one after a hard 6 month's search. Attached Images Last edited by 68gmsee; 09-29-2010 at 05:30 PM.

09-29-2010, 06:12 PM	#7
-dylan-(OO==\|==OO) I dont drive fast,, I fly low! Join Date: May 2010 Location: sheperdsville KY Posts: 118	Re: 67 chevy/gmc hub caps??? yea those are the ones i am wanting... lol imma be looking for a while!!! cant wait to get some on mine!!! __________________ ____________ /_______\ (OO==\|\|==OO) 67 GMC CUSTOM,72 GMC...65 chevelle...65 fastback mustang...75 VEGA...90 lx mustang...90 supercoupe...90 jeep wrangler...04 mach 1 mustang...06 toyota tacoma...08 nissan altima

10-04-2010, 11:50 PM	#8
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Re: 67 chevy/gmc hub caps??? I may be the reason you can't find any Four of these were original to the '67 GMC I have. The rest I found on eBay over the past 6 or 7 years. Sadly, out of all of them, most of them are dented. The nicest ones I have (some of which are NOS) have an inner ring attached to the rear of the cap (see the left cap in the picture on the left). Anyone know what type of wheels those fit? Attached Images __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

10-10-2010, 09:10 AM	#11
-dylan-(OO==\|==OO) I dont drive fast,, I fly low! Join Date: May 2010 Location: sheperdsville KY Posts: 118	Re: 67 chevy/gmc hub caps??? yea i would say thats why i cant find any.... lol WOw wish i had a set of those haha __________________ ____________ /_______\ (OO==\|\|==OO) 67 GMC CUSTOM,72 GMC...65 chevelle...65 fastback mustang...75 VEGA...90 lx mustang...90 supercoupe...90 jeep wrangler...04 mach 1 mustang...06 toyota tacoma...08 nissan altima

12-30-2010, 05:56 PM	#13
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 chevy/gmc hub caps??? i was told 64 impala rims would work for those

12-30-2010, 08:59 PM	#14
19553100 Registered User Join Date: Jan 2008 Location: Sunny Oaks Farm, Los Angeles Posts: 87	Re: 67 chevy/gmc hub caps??? I thought you meant a full hubcap. I'd love to find some nice original '67 CST spares. Attached Images __________________ Wayne Sunny Rust-free Southern California

12-30-2010, 09:00 PM	#15
50bomb Registered User Join Date: Jul 2010 Location: Hemet,Ca Posts: 1,502	Re: 67 chevy/gmc hub caps??? In order for those Original caps to fit does the wheels have to be the ones with the clips on them? like original steelies with clips. Those steelies are gonna be hard to find if i want the Original caps too. Same goes with the full cap. I actually leaning towards the full caps over the small. Last edited by 50bomb; 12-30-2010 at 09:02 PM.

12-30-2010, 09:51 PM	#16
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 67 chevy/gmc hub caps??? 1/2 ton dog dish caps fit nub wheels, 3/4 ton caps need the clips, they are the caps with the extra stepped metal piece on the back. Sharpie

12-30-2010, 10:27 PM	#17
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 chevy/gmc hub caps??? Here is another question. What did the cst and super custom 4x4's have for a hubcap in a half ton?

12-30-2010, 10:39 PM	#18
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,357	Re: 67 chevy/gmc hub caps??? Beware of 60's hubcaps, 1/2 ton and 3/4 ton caps look the same from the front, but the back side measurements are different. 3/4 ton caps take an inner ring of 8 3/4" I.D. ( heavy duty 1/2 tons take caps with innner rings at 7 3/4" I.D. ). This necessary to attach to wheel clips. Normal light duty 1/2 tons use the common 10 1/4" I.D. bump style caps. During the 60's 6 lug 1/2 tons came with both the standard bump wheel and wheels with clips. Attached Images



Register or Log In To remove these advertisements.

12-30-2010, 10:57 PM	#20
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 chevy/gmc hub caps??? i was told that the clips style hub caps fit the 62 impala rims sorry i got that wrong

12-31-2010, 12:34 AM	#21
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: 67 chevy/gmc hub caps??? I have a mint set of 4 painted 67 gmc ones. Ill get a pic tomorrow if interested, $200.00 __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

12-31-2010, 11:57 AM	#23
srvivor71 Registered User Join Date: Sep 2010 Location: Sullivan County, NY Posts: 455	Re: 67 chevy/gmc hub caps??? I'm waiting for my 4th and final (cherry condition) 71 GMC hubcap to arrive now (maybe even today). The first three I got, one by one, on e-bay, the 4th I got from networking on this forum. I'm also about to close the deal on a clean set of OEM type rims (with the nubs for the hubcaps), which I searched for on E-Bay but ended up finding here, just from networking with all the people who are happy to help. I had saved searches on e-bay that sent me an e-mail every time a new item was listed that matched my search. I started my search for rims and caps in September and (unless something goes wrong) will now have a full set of OEM shoes to replace my white "wagon wheels". Just stay with it and eventually it will all come together. Good luck!

12-31-2010, 12:01 PM	#24
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: 67 chevy/gmc hub caps??? I have 4-NOS ones like in 68gmsee picture but mine are the stainless steel ones $400.00 shipped

Register or Log In To remove these advertisements.