Project 69SWB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

~Whitey~ · 07-09-2013, 10:38 AM

after what seem like forever and a day of welding this back up real slow...

Name: 69Chevy_driverside6.jpg
Views: 710
Size: 35.6 KB

I ground down the welds... couldn't make up my mind if I wanted a dummy filler neck, then just decided to fill it in...

Name: 69Chevy_driverside7.jpg
Views: 712
Size: 36.2 KB

Name: 69Chevy_driverside7.jpg
Views: 712
Size: 36.2 KB

Name: 69Chevy_driverside9.jpg
Views: 699
Size: 30.5 KB

There's more to this repair but I didn't get pics, will try to take some tonight and put them in with it.. But basically I had to move the entire rocker about a 1/4 inch forward... and I also added a strip of 18 gauge down the door line to make the gap even.... I'll get some pics of that when I get the door back on during sanding and blocking.

07-09-2013, 10:38 AM	#11
~Whitey~ Registered User Join Date: Jun 2011 Location: Springfield, MO Posts: 677	Re: Project 69SWB after what seem like forever and a day of welding this back up real slow... I ground down the welds... couldn't make up my mind if I wanted a dummy filler neck, then just decided to fill it in... There's more to this repair but I didn't get pics, will try to take some tonight and put them in with it.. But basically I had to move the entire rocker about a 1/4 inch forward... and I also added a strip of 18 gauge down the door line to make the gap even.... I'll get some pics of that when I get the door back on during sanding and blocking. __________________ Jimmy .69SWB Build. Last edited by ~Whitey~; 07-09-2013 at 11:05 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.