GA parting 66 big window, a/c, long fleet

[Mathew21]

southern parts I do not need the center shaft for the column thanks. I would like the shifter linkage if possible.

[rickoner]

Originally Posted by southern parts

rickoner - are you looking for the rubber pieces ? I might have some but I think they can be bought new

I'm looking for the metal saddles that I believe are riveted to the crossmember. If the rubbers are there, I'll like them too. I've switched to the thicker V8 rad and now need the wider saddles/mounts. I could fab some but bolting ones on that fit would be alot easier. Haha

[jamesrussell26]

Hey southern,got a quote for gauges with harness for me yet?

[MikeN]

I'll take the auto brake pedal. PM me with info on how you prefer to be paid. Thanks!

[NVS-C10]

Originally Posted by southern parts

rickoner - are you looking for the rubber pieces ? I might have some but I think they can be bought new.

Mathew21 - I`ll try to get a shipping quote for you tomorrow. do you want the center shaft ? it`s the same price with or without ,only the shipping will change. (the long shaft will make it cost more to ship) I will check the drive shaft too.

NVS-C10 - will get the bumper off tomorrow. going to keep the spare tire holder and b/u lights with the bed.

slammerd - I`m keeping the bed together..... for now anyway.

63frankintruck - would the kick panel doors be the same from 63 thru 66 ?

Sick5 - will get a total with shipping for you tomorrow

earl84 - will pull them tomorrow.

PGSigns - I`m going to keep the radio knobs with the radio. will try to get all the other knobs off tomorrow.

yelmer - I`ll let you know if NVS-C10 backs out

62 bigwindow - I`m going to stay at $500 ...for a while

1960chevypanel - I`ll check it and get it pulled tomorrow

Thanks.. also since it's a powerglide truck I need the shifter pivot piece that attaches to the frame under the truck to the left of the transmission. And any other shift linkage that may be there and available.

[MikeN]

My bad - my uncle just called and reminded me that I already have an auto brake pedal in his storage closet. I will have to pass on the brake pedal.

[southern parts]

shipping quotes sent to jamesrussell26 , mathew21 , and sick5

reckoner - I have a complete set with the upper & lower 4 core brackets and used rubber pieces $75 plus shipping.

NVS-C10 - the bumper is welded to the hitch. if your still interested. I will try to get it off again tomorrow. pics added

PGSigns - here are the knobs and switches. the lighter and radio are both after mkt. the lighter didn`t survive being removed. $65 plus shipping for these 3 pieces

Enduro55 here`s a few pics of the windshield chrome. it has some scratches but I don't see any dents or bent places. I don't really want to pull it without a commitment so let`s say $50 on shipping. if it costs more I`ll cover it , if it`s less I`ll refund the difference

I`m keeping the p/g linkage for one of mine. sorry

[southern parts]

pics for Enduro55

[Mathew21]

Payment sent for the steering column.
Thanks

[Sick5]

payment sent on gun rack. do you have cigarette lighter?

[NVS-C10]

Originally Posted by southern parts

NVS-C10 - the bumper is welded to the hitch. if your still interested. I will try to get it off again tomorrow. pics added


I`m keeping the p/g linkage for one of mine. sorry

OK thanks.. yeah I'll pass on the bumper then..

Also when you say you're keeping the PG linkage did you mean the pivot part too that's attached to the frame (see picture below)? If not, I'll take it!!

[jamesrussell26]

Payment sent......pm sent

[PGSigns]

Here is my zip code for shipping.23072 What do the backup lights look like? One in the did not look to bad.
Jimmy

[southern parts]

Sampsmit000 - the hump not removable (all one piece) I have another auto column but it is in pieces right now. I'll add a few pics when I get it back together.

[sampsmit000]

Originally Posted by southern parts

Sampsmit000 - the hump not removable (all one piece) I have another auto column but it is in pieces right now. I'll add a few pics when I get it back together.

On the solid would you be willing to cut out most of the floor plan and sale that? I will post of picture of what I am meaning.
Posted via Mobile Device

[southern parts]

not right now as I have someone that may be interested in the whole cab.

[sampsmit000]

Originally Posted by sampsmit000

On the solid would you be willing to cut out most of the floor plan and sale that? I will post of picture of what I am meaning.
Posted via Mobile Device

Like the welded in section this picture
Posted via Mobile Device

[rickoner]

Originally Posted by southern parts

shipping quotes sent to jamesrussell26 , mathew21 , and sick5

reckoner - I have a complete set with the upper & lower 4 core brackets and used rubber pieces $75 plus shipping.

If you'll seperate, how much shipped (15126) for just the lowers with their rubbers? I picked up an upper already.

[65TRUK]

Are you willing to cut a donor panel off the cab for me? I need the passenger side rear cab corner area (bottom up to the body line just below door window from the door jam to around the back of the cab [I can be more specific if you're willing to cut]). Thanks,

[65TRUK]

Are you willing to cut a donor panel off the cab for me. I can give specifics if you are willing to do this. Thanks, Rod

[sharkskinman]

Any lower on the steering wheel?

[southern parts]

A couple people have shown interest in the cab so I wont be cutting any pieces off of it , at least for a while.

sharkskinman - the wheel has some cracks and pits in the chrome. I`ll try to get some better pics tomorrow.

[jmader]

How solid is the bed? Any chance of selling the bedsides separately?

[Sick5]

money sent for gun rack

[rickoner]

I'm not sure if you seen my post/question, but will you sell just the lower rad mounts?