PDF of Square Schematics & GM Training Manuals

[hatzie]

I have a longbed green and white 73 F250 390FE and a longbed red and white 66-67 Dodge W200 383B. I washed the bodies off, dumped ATF in the cylinders and sprayed the bodies and frames with used diesel oil around 1991 after my grandfather died. I canvas tarped, and tucked em away in the barn waiting on me. I did put them on heavy black plastic sheet so they aren't sitting directly on the concrete. They're cool looking trucks that got worked pretty hard for almost 100k. The interiors were farm wrecked and neither were running well when they were parked in the early 80's. I keep telling myself I'll get to them. The 76 & 86 are pretty much done so I may go over to the darkside

[savatreatabvr]

Originally Posted by hatzie

I have a longbed green and white 73 F250 390FE and a longbed red and white 66-67 Dodge W200 383B. I washed the bodies off, dumped ATF in the cylinders and sprayed the bodies and frames with used diesel oil around 1991 after my grandfather died. I canvas tarped, and tucked em away in the barn waiting on me. I did put them on heavy black plastic sheet so they aren't sitting directly on the concrete. They're cool looking trucks that got worked pretty hard for almost 100k. The interiors were farm wrecked and neither were running well when they were parked in the early 80's. I keep telling myself I'll get to them. The 76 & 86 are pretty much done so I may go over to the darkside

Lol! My 93 Ford work van has over 300,000 miles and starts every time, the only major surgery I've done to it so far was a recent pinion bearing replacement but I have to be honest, one of my favorite trucks was a 1974 F250 390 Supercab longbed. It started life as a carpet hauler so the suspension was beefed up but since it was a Supercab longbed that thing would get stuck on a pile of sh-t on level ground! Forget about taking it down a muddy road, lol!

[hatzie]

Originally Posted by savatreatabvr

Lol! My 93 Ford work van has over 300,000 miles and starts every time, the only major surgery I've done to it so far was a recent pinion bearing replacement but I have to be honest, one of my favorite trucks was a 1974 F250 390 Supercab longbed. It started life as a carpet hauler so the suspension was beefed up but since it was a Supercab longbed that thing would get stuck on a pile of sh-t on level ground! Forget about taking it down a muddy road, lol!

Big difference, for the better, in fuel and ignition systems in that timeframe. If I actually get started on one It'll get a Davis or Mallory HEI setup and the carbs will get some serious attention. The engines on both were probably in pretty reasonable shape even with the rough farm work.

[hatzie]

Used 314gb in Aug and 284 GB last month...
Moved most of the books off my AWS S3 bucket to Mediafire.
Added parts books as I'm no longer paying for bandwidth.

[Axle]

The link for the parts books are inop. If I trim the extra, I get a not found at mediafire.
Thanks yet again for posting all those.

Alex.

[hatzie]

Originally Posted by Axle

The link for the parts books are inop. If I trim the extra, I get a not found at mediafire.
Thanks yet again for posting all those.

Alex.

My fault. Didn't proofread my code.
I fixed my syntax errors. They work now that I've removed the extraneous function call from the link. At least three folks figured out my error, downloaded the books, and didn't post the fix...
It would've worked if you trimmed the extra leading [URL="

[Axle]

I got it to work today. I'm one of the three. =-) Also needed a colon thrown in.

Alex.

[bizzybody]

Links are dead for the parts books.

Could someone look up for a 1982 the part number for the column shift gate for the overdrive 700R4 transmission?

I'm swapping a 1991 TBI 350 and 700R4 into my 1982 GMC Sierra 3500 dually flatbed and I want the shifter shifting properly.

A while back I put a 700R4 in a carbed 1978 Chevy van and the column shifter never worked quite right. Didn't matter how it was adjusted, it would only seat firmly in one position.

[bizzybody]

Wiring diagrams for the 1991 C/K would be much appreciated since those standard cabs are completely different from the R/V crew cabs, suburbans and jimmies.

[hatzie]

Originally Posted by bizzybody

Wiring diagrams for the 1991 C/K would be much appreciated since those standard cabs are completely different from the R/V crew cabs, suburbans and jimmies.

These are the books that were in my library period. I'm not purchasing manuals to scan beyond what I have already posted or noted that I own and intend to scan. This is the entirety of the project.

I have no need for the T400 manuals beyond the ones I own for my 2000 C2500 6.5 GMC.

1991 didn't include the C K G S T or M chassis diagrams just R V & P. If you are willing to buy a set of 91 CK wiring diagrams and ship em to me I'll scan them and post em up with a nod to you as the guy who got em to me. Include a return label and I'll ship em back to you.
http://www.ebay.com/itm/1991-91-CHEV...7f53e0&vxp=mtr

[hatzie]

Repaired 1976 files that showed as corrupted PDF after download. If there are any others please let me know. I'll get them fixed.

[DieselBurner77]

Originally Posted by hatzie

Repaired 1976 files that showed as corrupted PDF after download. If there are any others please let me know. I'll get them fixed.

Signed up to thank you for the great manuals! Absolutely awesome

Also - X9037_1990_GMC_Light_Duty_Truck_Unit_Repair_Manual is corrupt.

[hatzie]

Originally Posted by DieselBurner77

Signed up to thank you for the great manuals! Absolutely awesome

Also - X9037_1990_GMC_Light_Duty_Truck_Unit_Repair_Manual is corrupt.

Uploading replacement copy.

[DieselBurner77]

Originally Posted by hatzie

Uploading replacement copy.

Thanks. PM me if you accept donations - this will save me a nice bit of money. I also went ahead and checked a few other manuals towards the bottom of the list and found some corrupt ones. I dont personally need em but just FYI:

X8937_1989_GMC_Light_Duty_Truck_Unit_Repair_Manual
X8836_1988_GMC_Light_Duty_Truck_Fuel_and_Emissions_Including_Driveability
X8832_1988_GMC_RVGP_Light_Duty_Truck_Service_Manual
X8736_1987_GMC_Light_Duty_Truck_Fuel_and_Emissions_Including_Driveability

[Lokin4AReason]

handy little thread =0)

[Chaplain]

I'm having trouble opening the files for 1979 vehicles. Could be on my end.

[hatzie]

They seem to be OK. All of them download and open in Adobe Acrobat Reader 9.5
Click the links and they'll open a Mediafire page... Right click the green "Download (xx.xxMB)" button in the upper right and save the PDF file.

These were created with Adobe Acrobat 9.5 so they shouldn't have artifacts that keep them from opening with other readers... Foxit for Linux/Android/IOS/Windows or Skim for Mac OS are the first ones I can name off the top of my head. There are lots of good and not so good lightweight PDF editors and readers if Adobe is too bloated to play well on your system.

[BLE 'BURBAN]

Wiring diagram for an 85 s/t10?

[hatzie]

Originally Posted by BLE 'BURBAN

Wiring diagram for an 85 s/t10?

I may get to the 85 ST diagrams eventually but not even scanned right now. It takes around an hour apiece to stitch the pages.

Keep your eyes open on Fleabay for manuals not in the hands of the manual mafia.

[hatzie]

Deleting and re-uploading those four right now.
I would still recommend buying the used paper when you can find it for a good price.
The electronic copies take the pressure off so you can wait for the good deals rather than being at the mercy of the manual mafia.
They also let you search the manuals without using something old fashioned like a paper index section. Many of these manuals lack an index anyway.

[mw67rs]

Sorry but I am not the most computer literate person in the world. I downloaded the manuals for a '77 and when I try to open them I get this message "Adobe Acrobate Reader DC could not "ST_352_77_Chevrolet_Light_Truck_Wiring_CK_10_30_Only.pdf" because it is either not a supported file type or because the file has been damaged." I went to the link you have and downloaded the most current version of the reader I think.

Any ideas what I might be doing wrong?

[hatzie]

Originally Posted by mw67rs

Sorry but I am not the most computer literate person in the world. I downloaded the manuals for a '77 and when I try to open them I get this message "Adobe Acrobate Reader DC could not "ST_352_77_Chevrolet_Light_Truck_Wiring_CK_10_30_Only.pdf" because it is either not a supported file type or because the file has been damaged." I went to the link you have and downloaded the most current version of the reader I think.

Any ideas what I might be doing wrong?

Not sure.
I downloaded and opened all three. Not sure what's happening.
Try deleting the corrupted file you downloaded, clear the browser cache http://www.refreshyourcache.com/en/home/, empty the recycle bin, and download again.
It looks like Mediafire has compressed the Unit Repair manual in a GZIP archive. You can un-compress it with a decent universal archive tool like 7ZIP http://www.7-zip.org.

[hatzie]

Added the 1975 Delco Radio Service Handbook.
If you are not tooled $$$$ and experienced in electronics and radio repair this is more of a curiosity than a useful manual.

[Andrew S]

Hatzie,
I've tried to open your new "1975 Delco Radio Service Handbook", and get an "access denied" error message.
Andrew

[hatzie]

Originally Posted by Andrew S

Hatzie,
I've tried to open your new "1975 Delco Radio Service Handbook", and get an "access denied" error message.
Andrew

Just checked. It works right now.