Daverods project 66 - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 07-08-2009, 10:28 PM

Nice score

Alan's Classic · 07-08-2009, 10:47 PM

Great score

If you part out put me down for the custom trim on the pillar behind the door if they are good,

bubba327 · 07-08-2009, 11:07 PM

Nice score on the new truck!! How was the show in Boise? I missed it. Went to the ranch and went 4-wheeling instead. Finish the first project before you even think of anything to do on the new one!!!

daverod · 07-09-2009, 12:07 AM

Quote:

Originally Posted by bubba327

Nice score on the new truck!! How was the show in Boise? I missed it. Went to the ranch and went 4-wheeling instead. Finish the first project before you even think of anything to do on the new one!!!

It was fun. Had a great time. There's a link to pic's I took alittle ways back on my thread.

daverod · 07-09-2009, 12:11 AM

Took out the old gas put in new. Check and added oil. Cleaned out the cab found 3 dead mice. Put in a different batt. Poured some gas in the carb. and she ran. Not for long though it's not pulling gas to the carb. Checked the filter just before the fuel pump it's good. The fuel pump is dry. I can suck fuel to the pump. Any ideas? I'm thinking I need a new fuel pump. Could it be vapor lock? I hate to buy a new pump if I don't need to. It has the straight six in it. New plugs, oil/filter, air filter and I should be running. Then I can work on stopping it has no brakes. Pulled it home on the freeway, took out the front headlights on the off ramp.

daverod · 07-09-2009, 07:39 AM

Quote:

Originally Posted by bubba327

Nice score on the new truck!! How was the show in Boise? I missed it. Went to the ranch and went 4-wheeling instead. Finish the first project before you even think of anything to do on the new one!!!

I bought this truck just for somthing to drive. My 460 sucks gas to bad and I like driving the old stuff anyways. Here's the boise pics. http://photobucket.com/daverod .

daverod · 07-09-2009, 07:43 AM

Quote:

Originally Posted by Alan's Classic

Great score

If you part out put me down for the custom trim on the pillar behind the door if they are good,

They are good and I'm keeping them

I'm not going to part it. I do have an nice camper you could have, for free. I don't know why they call it custom it doesn't even have a radio. Did have 3 mice though. Have'nt check the camper but I'm sure there some good finds in there too. Did I say it free?

daverod · 07-09-2009, 09:31 AM

Quote:

Originally Posted by Strodder

Nice score

Thanks Strodder Rock a bye baby.

Almost put the jack through the window taking the camper off. I don't think it would have been the first time. I might just keep the camper just to piss the neighbors off.

Strodder · 07-09-2009, 10:49 AM

Quote:

Originally Posted by daverod

[COLOR="Olive"] Could it be vapor lock?

Vapor lock only happens when it gets hot. Hows the fuel pump pressure. The diaphragm might be dried out. If it has pressure pull the top of the carb off to see if there's gas in the bowl. If gas is getting to the carb, the float could be stuck closed.

daverod · 07-09-2009, 12:36 PM

Pulled the sending unit off the tank. It was nasty. Cleaned the filter out, ran a coat hanger though the line, blew it out. Started right up. I think a new starter might be needed. When for alittle cruise made it back without crashing. I still need brakes, just using the emergency.

Power to the beaters.

Going to go get a starter and take my fuel pump back, I think the old pump is good for now. Old pump lasted about a hour longer had to go get the new one back. Put the starter in works good.

MacAttack · 07-09-2009, 12:49 PM

Quote:

Originally Posted by daverod

I still need brakes, just using the emergency.

Power to the beaters.

If I had a nickel for every time I've done that.......

daverod · 07-09-2009, 08:36 PM

Quote:

Originally Posted by MacAttack

If I had a nickel for every time I've done that.......

I would have made about 50 cent today alone. I'm getting so good I can even talk on the phone and use the brake. Tomorrow I'll have to get the real ones working.

ruffrida2005 · 07-09-2009, 09:44 PM

What do you think your going to use for the rear link set up?

daverod · 07-09-2009, 10:39 PM

Quote:

Originally Posted by ruffrida2005

What do you think your going to use for the rear link set up?

So far I like this, but I might just do a reg, 4 link. Still haven't made up my mind.

ruffrida2005 · 07-09-2009, 10:57 PM

that set up looks good, only thing I dont like too much is you wont get a whole lot of lift because of where the bags are mounted!

daverod · 07-09-2009, 11:07 PM

I don't think I want a lot of lift. Just enough to drive.

ruffrida2005 · 07-09-2009, 11:11 PM

I hear ya, but make sure you have enough not to highcenter on bumps!

daverod · 07-09-2009, 11:17 PM

I'll drive around the bumps

I saw one at the car show it was a 2 link. I can't get the pic to load. It moved things a lot but it was just a 2 link.

protrash64 · 07-09-2009, 11:24 PM

"Power to the beaters".........

I'll remember that when I'm driving around in my GM Obama-rado someday.

Strodder · 07-10-2009, 10:49 AM

Nice set up. Kind of interesting how he put the notch backwards on one side.

daverod · 07-10-2009, 11:18 AM

Quote:

Originally Posted by Strodder

Nice set up. Kind of interesting how he put the notch backwards on one side.

Think that was on purpose? I did'nt even notice.

Like I said I'm a work in progress. Know just enough to be dangerous.

Strodder · 07-10-2009, 11:27 AM

Quote:

Originally Posted by daverod

Think that was on pupose? I did'nt even notice.

Like I said I'm a work in progress. Know just enough to be dangerous.

Think things out and don't do anything stupid.

daverod · 07-10-2009, 03:39 PM

Stupid? Think things out? So much for my early retirement program.

Put on a new brake line, now I have brakes.

Also needed a new carrier bearing, in the process of that.

Got my bearing put in, what a pain. Truck runs good ready for work.

daverod · 07-11-2009, 02:35 PM

Been out burning around in the new 64. Going alittle further each time. Can't seem to get mt fuel gage working right. When I turn it on it pegs to full. When I turn it off it reads about 1/4. I know it has gas because I just put $20 in it. I'm thinking maybe my sending unit is off?

It seems to be wired right.

Alan's Classic · 07-11-2009, 03:09 PM

Quote:

Originally Posted by protrash64

"Power to the beaters".........

I'll remember that when I'm driving around in my GM Obama-rado someday.

Will you have to take it too the white house for warranty work?

07-08-2009, 10:28 PM	#301
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Nice score __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

07-08-2009, 10:47 PM	#302
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Daverods project 66 Great score If you part out put me down for the custom trim on the pillar behind the door if they are good, __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

07-08-2009, 11:07 PM	#303
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Nice score on the new truck!! How was the show in Boise? I missed it. Went to the ranch and went 4-wheeling instead. Finish the first project before you even think of anything to do on the new one!!! __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

07-09-2009, 12:11 AM	#305
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Took out the old gas put in new. Check and added oil. Cleaned out the cab found 3 dead mice. Put in a different batt. Poured some gas in the carb. and she ran. Not for long though it's not pulling gas to the carb. Checked the filter just before the fuel pump it's good. The fuel pump is dry. I can suck fuel to the pump. Any ideas? I'm thinking I need a new fuel pump. Could it be vapor lock? I hate to buy a new pump if I don't need to. It has the straight six in it. New plugs, oil/filter, air filter and I should be running. Then I can work on stopping it has no brakes. Pulled it home on the freeway, took out the front headlights on the off ramp. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-09-2009 at 08:20 AM.

07-09-2009, 12:36 PM	#310
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Pulled the sending unit off the tank. It was nasty. Cleaned the filter out, ran a coat hanger though the line, blew it out. Started right up. I think a new starter might be needed. When for alittle cruise made it back without crashing. I still need brakes, just using the emergency. Power to the beaters. Going to go get a starter and take my fuel pump back, I think the old pump is good for now. Old pump lasted about a hour longer had to go get the new one back. Put the starter in works good. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-09-2009 at 08:32 PM.

07-09-2009, 09:44 PM	#313
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 What do you think your going to use for the rear link set up? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

07-09-2009, 10:57 PM	#315
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 that set up looks good, only thing I dont like too much is you wont get a whole lot of lift because of where the bags are mounted! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

07-09-2009, 11:07 PM	#316
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I don't think I want a lot of lift. Just enough to drive. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

07-09-2009, 11:11 PM	#317
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 I hear ya, but make sure you have enough not to highcenter on bumps! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

07-09-2009, 11:17 PM	#318
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I'll drive around the bumpsI saw one at the car show it was a 2 link. I can't get the pic to load. It moved things a lot but it was just a 2 link. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

07-09-2009, 11:24 PM	#319
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Daverods project 66 "Power to the beaters"......... I'll remember that when I'm driving around in my GM Obama-rado someday. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

07-10-2009, 10:49 AM	#320
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Nice set up. Kind of interesting how he put the notch backwards on one side. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

07-10-2009, 03:39 PM	#323
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Stupid? Think things out? So much for my early retirement program. Put on a new brake line, now I have brakes. Also needed a new carrier bearing, in the process of that.Got my bearing put in, what a pain. Truck runs good ready for work. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-10-2009 at 11:17 PM.

07-11-2009, 02:35 PM	#324
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Been out burning around in the new 64. Going alittle further each time. Can't seem to get mt fuel gage working right. When I turn it on it pegs to full. When I turn it off it reads about 1/4. I know it has gas because I just put $20 in it. I'm thinking maybe my sending unit is off? It seems to be wired right. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-11-2009 at 02:35 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.