Al's 71C10 Rebuild - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72BlckButy · 09-24-2011, 11:23 AM

Looks good!

big_al_71 · 09-24-2011, 01:24 PM

Thanks guys.....As far as the porterbuilt stuff i spoke with nate earlier this year about the possibility of me shipping my truck to him but it is all in the air for now....

msgross · 09-24-2011, 08:15 PM

nice rear end upgrade... so to speak!

big_al_71 · 09-24-2011, 09:35 PM

Quote:

Originally Posted by msgross

nice rear end upgrade... so to speak!

Ha!!!!

72BlckButy · 09-24-2011, 10:15 PM

So what else is coming in from the shipper?

big_al_71 · 09-24-2011, 10:17 PM

Quote:

Originally Posted by 72BlckButy

So what else is coming in from the shipper?

cnotch, lowering blocks, new gauge bezel

72BlckButy · 09-24-2011, 10:22 PM

Nice...

big_al_71 · 09-24-2011, 10:32 PM

Quote:

Originally Posted by 72BlckButy

Nice...

stay tuned for picts of the progress....I am in truck mode again

72BlckButy · 09-24-2011, 10:36 PM

Can't wait to see the notch and the lowering blocks. Are you changing the front any? Springs?

big_al_71 · 09-24-2011, 10:46 PM

Quote:

Originally Posted by 72BlckButy

Can't wait to see the notch and the lowering blocks. Are you changing the front any? Springs?

doing the samething rob did on his farm truck, getting rid of some of the rake depending what it comes out like I may cut a half a coil up front.

**67cheby** · 09-24-2011, 10:52 PM

cant wait to see it !!

thor · 09-26-2011, 03:51 PM

Tailgate band looks great! Can't wait to see dash bezel and new gauges.

big_al_71 · 09-27-2011, 07:36 PM

Quote:

Originally Posted by thor

Tailgate band looks great! Can't wait to see dash bezel and new gauges.

Cant wait my self....I am waiting for a couple of pieces to arrive and then it is go time......Hopefully we will get the gauges done by Sunday..

Then on to the rear suspension...

big_al_71 · 09-27-2011, 07:42 PM

I just measured on a level surface the exact height of the truck from the floor to the out lip of the fender and bedside.

this post is basically for me to document before and after as I am hoping that I am happy with the stance because if not Bags will be next...

front 27 1/2 and rear 30

**Hart_Rod** · 09-28-2011, 10:47 AM

Quote:

Originally Posted by big_al_71

I just measured on a level surface the exact height of the truck from the floor to the out lip of the fender and bedside.

this post is basically for me to document before and after as I am hoping that I am happy with the stance because if not Bags will be next...

front 27 1/2 and rear 30

Are you going to have clearance for your rear tires?

big_al_71 · 09-28-2011, 10:53 AM

Quote:

Originally Posted by Hart_Rod

Are you going to have clearance for your rear tires?

I looked under there last night and it looked like it will clear and not rub then again I wont know 100% till I bring the truck to the shop and check while in the air. What is the measurement on your truck from the floor to the edge of the wheel opening in the rear? as it sits today.

**67cheby** · 09-28-2011, 10:53 AM

i hope your not happy...LOL....evil laugh

big_al_71 · 09-28-2011, 11:10 AM

Quote:

Originally Posted by 67cheby

i hope your not happy...LOL....evil laugh

I can assure you that if Al is not happy porterbuilt is going to get a call from me with my amex in hand...

**67cheby** · 09-28-2011, 11:16 AM

NOT HAPPY, NOT HAPPY , NOT HAPPY , NOT HAPPY , NOT HAPPY.......do i have to keep going ??

big_al_71 · 09-28-2011, 11:59 AM

Quote:

Originally Posted by 67cheby

NOT HAPPY, NOT HAPPY , NOT HAPPY , NOT HAPPY , NOT HAPPY.......do i have to keep going ??

big_al_71 · 09-29-2011, 08:27 PM

Finally received my covans bezel now time to wire these gauges up and get them installed....

**67cheby** · 09-29-2011, 09:33 PM

GET R DONE...so we can get back to this LOWERING THING !!

raull · 09-29-2011, 10:04 PM

We will get that truck on air before he realizes it. The truck is in my garage now so he may not have a choice after all.

We have gauges ready to go in.....

**lolife99** · 09-29-2011, 10:08 PM

Quote:

Originally Posted by raull

We will get that truck on air before he realizes it. The truck is in my garage now so he may not have a choice after all.

We have gauges ready to go in.....

raull,... WELCOME to the board.
I love your Camaro and the style of your builds.
I trust you will steer Al in the right direction.

(I'm following your stepside build also)

raull · 09-29-2011, 10:13 PM

Quote:

Originally Posted by lolife99

raull,... WELCOME to the board.
I love your Camaro and the style of your builds.
I trust you will steer Al in the right direction.

(I'm following your stepside build also)

Thank you... I appreciate it.

I am definetly doing my best to take both trucks to the next level stay tuned..

By the way could that other thread be moved to projects and builds?

09-24-2011, 11:23 AM	#1
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Al's 71C10 Rebuild Looks good! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-24-2011, 01:24 PM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild Thanks guys.....As far as the porterbuilt stuff i spoke with nate earlier this year about the possibility of me shipping my truck to him but it is all in the air for now.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-24-2011, 08:15 PM	#3
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Al's 71C10 Rebuild nice rear end upgrade... so to speak! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-24-2011, 10:15 PM	#5
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Al's 71C10 Rebuild So what else is coming in from the shipper? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-24-2011, 10:22 PM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Al's 71C10 Rebuild Nice... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-24-2011, 10:36 PM	#9
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Al's 71C10 Rebuild Can't wait to see the notch and the lowering blocks. Are you changing the front any? Springs? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-24-2011, 10:52 PM	#11
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Al's 71C10 Rebuild cant wait to see it !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-26-2011, 03:51 PM	#12
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: Al's 71C10 Rebuild Tailgate band looks great! Can't wait to see dash bezel and new gauges. __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

09-27-2011, 07:42 PM	#14
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild I just measured on a level surface the exact height of the truck from the floor to the out lip of the fender and bedside. this post is basically for me to document before and after as I am hoping that I am happy with the stance because if not Bags will be next... front 27 1/2 and rear 30 Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-28-2011, 10:53 AM	#17
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Al's 71C10 Rebuild i hope your not happy...LOL....evil laugh __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-28-2011, 11:16 AM	#19
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Al's 71C10 Rebuild NOT HAPPY, NOT HAPPY , NOT HAPPY , NOT HAPPY , NOT HAPPY.......do i have to keep going ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-29-2011, 08:27 PM	#21
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild Finally received my covans bezel now time to wire these gauges up and get them installed.... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-29-2011, 09:33 PM	#22
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Al's 71C10 Rebuild GET R DONE...so we can get back to this LOWERING THING !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-29-2011, 10:04 PM	#23
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: Al's 71C10 Rebuild We will get that truck on air before he realizes it. The truck is in my garage now so he may not have a choice after all. We have gauges ready to go in..... Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.