AZ FS Jeep XJ intermediate shaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 08-01-2019, 08:56 PM

This is the Jeep Cherokee intermediate shaft that a lot of guys(myself included) are using to tighten up the steering and get rid of the rag joint at the steering box. This is in good shape(dirty) and included both bolts. You need to have a double D output shaft on the bottom of your column for this to work. $60 not including shipping.

SunSoaked · 08-02-2019, 01:17 AM

That's a good deal. If I hadn't just completed this mod myself I'd be all over it.

**1774btcrew** · 08-02-2019, 09:41 AM

Quote:

Originally Posted by SunSoaked

That's a good deal. If I hadn't just completed this mod myself I'd be all over it.

Thanks! Normally I sell them a. s a combination with the rebuilt column I do.

**Eagle9502** · 08-04-2019, 07:35 PM

Will this work for an ‘84?

**1774btcrew** · 08-04-2019, 07:42 PM

As long as you have a double d on the bottom of your column. If the column hasn't been changed it will work

**Eagle9502** · 08-05-2019, 08:20 AM

10/4, Let me look at what I've got.

**1774btcrew** · 08-09-2019, 08:55 PM

ttt

**Eagle9502** · 08-19-2019, 09:47 PM

Price shipped to 30415?

**1774btcrew** · 08-20-2019, 02:24 PM

Quote:

Originally Posted by Eagle9502

Price shipped to 30415?

I will get you a quote today.

**Eagle9502** · 08-26-2019, 09:16 AM

Any luck on a shipping quote? Thanks

**Eagle9502** · 09-01-2019, 09:01 AM

Bump

rodstored-72 · 09-19-2019, 10:48 PM

is this still available? do you know if this would fit on a 85-86 2wd swb model?

thanks

**1774btcrew** · 09-19-2019, 10:52 PM

Quote:

Originally Posted by rodstored-72

is this still available? do you know if this would fit on a 85-86 2wd swb model?

thanks

It is still available. This will work on any column with a double D output shaft. 85-86 are double D. You just need to put a notch in the bottom of your steering column for the bolt to go through as GM had the bolt go through the center. There are lots of write ups all over the internet on using these on Squarebody trucks if you need more details

**1774btcrew** · 09-24-2019, 12:36 AM

Quote:

Originally Posted by rodstored-72

is this still available? do you know if this would fit on a 85-86 2wd swb model?

thanks

Were you interested in it?

rodstored-72 · 10-01-2019, 05:55 PM

yes... I am getting ready to pull the motor this weekend & i think it would be a good time to make the switch. where about in the phoenix area are you? I am also looking for a few other items but i have items for trade as well.

thanks!

**1774btcrew** · 10-02-2019, 12:50 AM

Quote:

Originally Posted by rodstored-72

yes... I am getting ready to pull the motor this weekend & i think it would be a good time to make the switch. where about in the phoenix area are you? I am also looking for a few other items but i have items for trade as well.

thanks!

I am on the north side of town at Bell Rd and I17

rodstored-72 · 10-07-2019, 03:41 PM

1774 btcrew,
I have sent you a PM

thanks!

**1774btcrew** · 10-08-2019, 10:52 PM

Quote:

Originally Posted by rodstored-72

1774 btcrew,
I have sent you a PM

thanks!

PM responded to

08-01-2019, 08:56 PM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	FS Jeep XJ intermediate shaft This is the Jeep Cherokee intermediate shaft that a lot of guys(myself included) are using to tighten up the steering and get rid of the rag joint at the steering box. This is in good shape(dirty) and included both bolts. You need to have a double D output shaft on the bottom of your column for this to work. $60 not including shipping. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

08-02-2019, 01:17 AM	#2
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,524	Re: FS Jeep XJ intermediate shaft That's a good deal. If I hadn't just completed this mod myself I'd be all over it.

08-04-2019, 07:35 PM	#4
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 834	Re: FS Jeep XJ intermediate shaft Will this work for an ‘84?

08-04-2019, 07:42 PM	#5
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: FS Jeep XJ intermediate shaft As long as you have a double d on the bottom of your column. If the column hasn't been changed it will work __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

08-05-2019, 08:20 AM	#6
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 834	Re: FS Jeep XJ intermediate shaft 10/4, Let me look at what I've got.

08-09-2019, 08:55 PM	#7
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: FS Jeep XJ intermediate shaft ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

08-19-2019, 09:47 PM	#8
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 834	Re: FS Jeep XJ intermediate shaft Price shipped to 30415?

08-26-2019, 09:16 AM	#10
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 834	Re: FS Jeep XJ intermediate shaft Any luck on a shipping quote? Thanks

09-01-2019, 09:01 AM	#11
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 834	Re: FS Jeep XJ intermediate shaft Bump

09-19-2019, 10:48 PM	#12
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,962	Re: FS Jeep XJ intermediate shaft is this still available? do you know if this would fit on a 85-86 2wd swb model? thanks

10-01-2019, 05:55 PM	#15
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,962	Re: FS Jeep XJ intermediate shaft yes... I am getting ready to pull the motor this weekend & i think it would be a good time to make the switch. where about in the phoenix area are you? I am also looking for a few other items but i have items for trade as well. thanks!

10-07-2019, 03:41 PM	#17
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,962	Re: FS Jeep XJ intermediate shaft 1774 btcrew, I have sent you a PM thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.