307 2Jet Float Settings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dave K. · 08-09-2016, 10:27 PM

Does anyone have the float settings for a GM 2Jet Carb on a 307?

I believe it's float level at 27/32" and drop at 1.75"

Thanks, Dave

**j_cst_10** · 08-12-2016, 11:50 AM

I know this isn't what you are looking for but I just pulled mine apart because it was dumping gas and the idle mixture screws could be bottomed out and it would still run fine.

I cleaned it out and adjusted the float so when the top half of the carb was upside down it was roughly level.

Runs excellent and the idle mixture screws work again.

08-09-2016, 10:27 PM	#1
Dave K. Registered User Join Date: Jul 2009 Location: Milwaukee, WI Posts: 575	307 2Jet Float Settings Does anyone have the float settings for a GM 2Jet Carb on a 307? I believe it's float level at 27/32" and drop at 1.75" Thanks, Dave

08-12-2016, 11:50 AM	#2
j_cst_10 Senior Member Join Date: Nov 2008 Location: Cleveland, OH Posts: 575	Re: 307 2Jet Float Settings I know this isn't what you are looking for but I just pulled mine apart because it was dumping gas and the idle mixture screws could be bottomed out and it would still run fine. I cleaned it out and adjusted the float so when the top half of the carb was upside down it was roughly level. Runs excellent and the idle mixture screws work again.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.