The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-07-2012, 04:55 PM   #1
botsdots
Registered User
 
Join Date: Jan 2008
Location: Katy, TX
Posts: 47
'63 Long Fleet "Big Orange"

Greetings from sunny So Cal! Here's my truck and my story...

I grew up on a quiet street in San Diego. The street was quiet but one of my neighbors wasn't. Scott was his name, a nice "kid" in college who had three 64-66 trucks. I was 13 or 14 at the time, my dad had just passed away, and I spent most days in his garage learning everything from shoddy body work to engine building. Scott not only taught me the old car ropes, but encouraged me to figure things out on my own, ask questions, and if the question had an obvious answer he would encourage me to figure it out on my own.

When it came time to start driving, convenience won and I drove the family Honda Accord. I found a group of friends in the "tuner" crowd and enjoyed modifying imports. Fast forward 10 years, a 2000 Civic SI (still love that car), and a marriage. The beloved Civic was stolen while on my honeymoon and I made out like a bandit with insurance. I now had cash burning a hole in my pocket and a father-in-law (FIL) who collects old cars. I spent Christmas vacation of 07-08 building/installing a monster motor in my FIL's '57 Bel Air and the bug bit me. After a couple months of searching and craigslisting, I landed on an orange '63 LWB C20 (not really a C20 anymore) in Orange County. Being twice removed from the guy that did all the work, all I had to go on was a binder FULL of receipts and brochures. It was like the history of the truck unfolded in front of me. I paid $4500 and drove it home.

Come May '08, my FIL flew out to San Diego and we replaced just about every user-replaceable rubber component on the truck. Every hose, gasket, fluid, etc. was replaced. I've done a couple other projects here and there. I added power steering, replaced all the a-arm cross shafts, ball joints and tie rod ends, and changed from C20 body mounts to C10 body mounts.

So here's my truck "Big Orange" (appropriately named by my grandmother) at the CPP Cruise and Shop Tour in 2011. I'm going to try to document additional work here. I hope someone gets some enjoyment out of this.

DS
Attached Images
 
botsdots is offline   Reply With Quote
Old 09-07-2012, 05:21 PM   #2
sigshooter
Registered User
 
sigshooter's Avatar
 
Join Date: Aug 2011
Location: Tahlequah, Ok
Posts: 1,235
Re: '63 Long Fleet "Big Orange"

Love the truck, and love the color!

Welcome to the forum
__________________
1965 long bed ( grandpas old truck )
1964 long bed BBW Custom Cab
1966 Short stepside
1964 long bed
1965 long bed Custom Cab, factory air, V-8, powerglide
sigshooter is offline   Reply With Quote
Old 09-07-2012, 07:29 PM   #3
Modges'66
Registered User
 
Modges'66's Avatar
 
Join Date: Feb 2012
Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A.
Posts: 1,081
Re: '63 Long Fleet "Big Orange"

Welcome to the forum!
Nice lookin truck!
Post some more pics please!
Modges'66 is offline   Reply With Quote
Old 09-07-2012, 07:58 PM   #4
Ta2Don
Registered User
 
Ta2Don's Avatar
 
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
Re: '63 Long Fleet "Big Orange"

Welcome Aboard... Diggin' the orange
__________________
DON
Proverbs 27:17
US Air Force Retarded errr Retired
My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920
My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266
My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD
Ta2Don is offline   Reply With Quote
Old 09-07-2012, 08:32 PM   #5
botsdots
Registered User
 
Join Date: Jan 2008
Location: Katy, TX
Posts: 47
Re: '63 Long Fleet "Big Orange"

Thanks everyone.

I have to say, I can't take credit for the truck or the color at this point. The PO did the majority of the work and everything I've done has been "under the covers." I'll try to keep this thread updated with things I'm working on.
botsdots is offline   Reply With Quote
Old 09-07-2012, 08:56 PM   #6
Racer2172
Senior Member
 
Join Date: Nov 2011
Location: Yuma, AZ
Posts: 319
Re: '63 Long Fleet "Big Orange"

Nice truck
Posted via Mobile Device
__________________
65 C-10 Times gone by(Sons truck)http://67-72chevytrucks.com/vboard/s...92#post6164692
70 C-30 Tow truck AKA Highlighter
02 Silverado 2500 HD CUCVII Tow Rig/DD
1968 C10 Project Quarantine http://67-72chevytrucks.com/vboard/s...d.php?t=804800
1980 Buick Regal Dirt Stock car
Racer2172 is offline   Reply With Quote
Old 09-07-2012, 09:20 PM   #7
Jeff La
Registered User
 
Join Date: Dec 2011
Location: Donaldsonville, La.
Posts: 1,024
Re: '63 Long Fleet "Big Orange"

Welcome, you have a really nice truck
Jeff La is offline   Reply With Quote
Old 09-07-2012, 11:07 PM   #8
Alan's Classic
1 thing at a time is progress.
 
Alan's Classic's Avatar
 
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
Re: '63 Long Fleet "Big Orange"

Welcome, I'm a little biased on the color. Truck looks great!!
Alan's Classic is offline   Reply With Quote
Old 09-08-2012, 07:59 AM   #9
j.kirn
Registered User
 
Join Date: Jun 2006
Location: MO.
Posts: 970
Re: '63 Long Fleet "Big Orange"

Good looking truck and the color stands out
j.kirn is offline   Reply With Quote
Old 09-08-2012, 11:26 AM   #10
dr69burb
Registered User
 
dr69burb's Avatar
 
Join Date: Mar 2012
Location: San Diego CA
Posts: 223
Re: '63 Long Fleet "Big Orange"

Good looking truck man. I love seeing this still cruzin around san diego
Posted via Mobile Device
__________________
Baggin 64 lwb project
http://67-72chevytrucks.com/vboard/s...d.php?t=537406
dr69burb is offline   Reply With Quote
Old 09-08-2012, 12:01 PM   #11
Chevy Fleetside
Registered User
 
Chevy Fleetside's Avatar
 
Join Date: Sep 2006
Location: San Francisco
Posts: 4,774
Re: '63 Long Fleet "Big Orange"

cool truck and nice story.
__________________
"A man and his truck, what a beautiful thing"

65 Short Fleetside BBC
65 Long Fleetside 283 3 on the tree for now.
my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536
Chevy Fleetside is offline   Reply With Quote
Old 09-08-2012, 11:24 PM   #12
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '63 Long Fleet "Big Orange"

Welcome to the forum

That is a very nice looking truck. I assume by your comment that the truck is no longer a C20, and might have C10 running gear? I look forward to more pics....
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 09-08-2012, 11:46 PM   #13
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: '63 Long Fleet "Big Orange"

Orange looks so good on these trucks.
Welcome
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 09-09-2012, 12:13 PM   #14
botsdots
Registered User
 
Join Date: Jan 2008
Location: Katy, TX
Posts: 47
Re: '63 Long Fleet "Big Orange"

Quote:
Originally Posted by Captainfab View Post
I assume by your comment that the truck is no longer a C20, and might have C10 running gear?
Maybe that comment wasn't entirely accurate, I'm not sure. When I did the front end suspension rebuild, a lot of the C20 parts I bought didn't fit. So I started using "'63 C10" for the parts counter folks and things started fitting. Also, I've swapped the cab mounts over to the C10 style and I assumed, maybe incorrectly, that the trailing arm suspension I have wasn't found on the C20. Either way, it's a bit of a mutt now
Posted via Mobile Device
botsdots is offline   Reply With Quote
Old 09-14-2012, 12:13 AM   #15
botsdots
Registered User
 
Join Date: Jan 2008
Location: Katy, TX
Posts: 47
Re: '63 Long Fleet "Big Orange"

I did a bit of work today. No shots of the in-progress, but here's the final product:


The PO had attached the headlight bezels with drywall screws. I lost one of them on the Coronado bridge a few years ago. Totally bummed that all the replacements are chrome, but I plan on going chrome on the front end at some point, so here we go.

The big brown truck stopped by and brought the following:
Headlight bezels
New parking/tail light plastics
Accompanying screws
Thermostat housing (the aluminum swivel kind)
Lighted license plate bolts (gotta fend off the cops)
Cast aluminum valve covers (and gaskets)
Magnaflow mufflers
Pypes exhaust kit

Tomorrow's task: thermostat housing and hoses, license plate bolts
botsdots is offline   Reply With Quote
Old 03-29-2014, 10:41 PM   #16
botsdots
Registered User
 
Join Date: Jan 2008
Location: Katy, TX
Posts: 47
Re: '63 Long Fleet "Big Orange"

Been idle for a while... I think everyone knows how these things go.

I decided to install full length headers, got the headers in and they're interfering with the brake lines. Seemed like a good opportunity to do front discs.. so it sat for about 9 months. And here's the last three days progress:

botsdots is offline   Reply With Quote
Old 03-29-2014, 11:06 PM   #17
NEWFISHER
Registered User
 
NEWFISHER's Avatar
 
Join Date: Sep 2012
Location: Oregon
Posts: 3,303
Re: '63 Long Fleet "Big Orange"

Awesome you are back at it! Kinda like the color too
__________________
GOD BLESS AMERICA!
NEWFISHER is offline   Reply With Quote
Old 03-29-2014, 11:17 PM   #18
botsdots
Registered User
 
Join Date: Jan 2008
Location: Katy, TX
Posts: 47
Re: '63 Long Fleet "Big Orange"

I think you might be biased Nice truck you've got as well!

I'm in the process of removing the crossmember to have it powder coated. It's not in the best shape, but I want a nice base for being able to clean up oil spills. Planning on powder coating the cross member black. I also have Porterbuilt control arms on the way, so those will be getting powder coated as well. I'm thinking of Silver Vein under an Orange top coat... kind of like this, but in orange:
botsdots is offline   Reply With Quote
Old 03-30-2014, 06:24 AM   #19
buzz in oz
Registered User
 
Join Date: Apr 2013
Location: mt gambier
Posts: 37
Re: '63 Long Fleet "Big Orange"

gday..cool truck.i am chasing a set of stock spindles and drum brakes for my 66..would these fit ok?if so...do you want to sell them?cheers Buzz
buzz in oz is offline   Reply With Quote
Old 03-30-2014, 11:29 AM   #20
TJ's Chevy
Post Whore
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: '63 Long Fleet "Big Orange"

Cool truck! Glad yer back!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline   Reply With Quote
Old 04-01-2014, 03:13 AM   #21
botsdots
Registered User
 
Join Date: Jan 2008
Location: Katy, TX
Posts: 47
Re: '63 Long Fleet "Big Orange"

So I pulled a Camaro rear swaybar from the junk yard. It is, unfortunately, the smallest rear swaybar a Camaro had... 19mm or 3/4" Is that sufficient for the back end of these trucks? I don't want to go to the trouble of installing it and have it be worthless.
botsdots is offline   Reply With Quote
Old 04-04-2014, 02:20 PM   #22
Mike Bradbury
Registered User
 
Mike Bradbury's Avatar
 
Join Date: Apr 2008
Location: San Diego California
Posts: 1,316
Re: '63 Long Fleet "Big Orange"

Glad you are finally working on it. I am happy to help out where I can. You will love that Porter built system.
__________________
I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale

Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961

Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583
Mike Bradbury is offline   Reply With Quote
Old 04-08-2014, 11:55 AM   #23
botsdots
Registered User
 
Join Date: Jan 2008
Location: Katy, TX
Posts: 47
Re: '63 Long Fleet "Big Orange"

I spent most of yesterday trying to find someone to hot tank my crossmember in San Diego, but I struck out hard. There's one place in Anaheim (Ellsworth Truck) that said they'd do it for $250. That's a bit steep for me, so I went to the big box store and picked up some DIY materials:


Last night, I used the oven cleaner, 3M scuff pad and a screwdriver to dig out most of the gunk. It left behind the nastiest sludge I've ever seen. So I wrapped it in plastic, put it in the wife's car trunk and headed to the nearest self-serve car wash. The next part was a risk (chemically), but I figured it wouldn't be too bad: I covered the thing in Engine Brite, let it sit for 5 minutes, then started with the rinse. It did a pretty good job, but still has some thick stuff caked on. I'm going to hit it with the oven cleaner again and probably some kind of brush, I haven't figured out what brush yet. Should I stay away from metal? Stainless? On my angle grinder?

Also, this car wash had a "mat blaster" floor mat dryer. I used that to dry the thing, it was almost completely dry after just a couple minutes.

3M Scuff Pads: $2.70
Generic Oven Cleaner: $3.98
Car Wash: $5.66
Total Cost: $12.34

Not too bad.
botsdots is offline   Reply With Quote
Old 04-08-2014, 12:14 PM   #24
NEWFISHER
Registered User
 
NEWFISHER's Avatar
 
Join Date: Sep 2012
Location: Oregon
Posts: 3,303
Re: '63 Long Fleet "Big Orange"

Quote:
Originally Posted by botsdots View Post
So I pulled a Camaro rear swaybar from the junk yard. It is, unfortunately, the smallest rear swaybar a Camaro had... 19mm or 3/4" Is that sufficient for the back end of these trucks? I don't want to go to the trouble of installing it and have it be worthless.
I had one installed and removed it during the bag drop. It helped some and looked cool. A big front one does %75 of the work it seems.
__________________
GOD BLESS AMERICA!
NEWFISHER is offline   Reply With Quote
Old 04-08-2014, 08:04 PM   #25
bj383ss
Registered User
 
bj383ss's Avatar
 
Join Date: Sep 2012
Location: Leander, TX
Posts: 969
Re: '63 Long Fleet "Big Orange"

Keep using the oven cleaner. I bought that exact same can. It works well. Spray it let it sit for 10-15 minutes. Do some scraping. Rinse. Spray it again. I have used up 2 cans of this stuff on my front suspension parts. For $4 a can it beats any off the shelf engine cleaner. I cleaned my whole engine with 2 passes of this stuff.

Bret
__________________
64' Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=586955
bj383ss is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com