PA 72 blazer part out

[tim71]

Originally Posted by 1rippen6

Sorry, I've been busy, I'll have some time to look tomorrow.

Still want the AC brace that bolts to intake manifold that supports the rear of compressor....
but more important , does this Blazer have the 2 rear axle plates that sit under axle and secure the axle to the leaf springs? The axle u bolts face down and go thru this plate. I need 2 one for each side of axle. I think 1/2 ton K trucks use the same setup. I put a photo of plate on a WTB posting. I would buy the rear u bolts also, if they are usable.

Thanks, Tim