Lots of 88-04 Stuff for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

99-2door · 08-11-2004, 04:05 PM

Have the folowing items for sale:

96 5.0L vortec with 4L60e auto

96 Short fleet bed red with black 2-tone $400

98 Short fleet bed Green with tan 2-tone $500

96 Complete 5.7L Vortec Injection and harness, all accesories and 4L80e 100K
$1750

01 6.0L Engine complete with all accessories and harness +ECM 115K $1950
(Matching steering column, dash harness and BCM available)

01 4L80e 4x4 with manual shift transfer case. $700

94 NV4500 from K3500 with transfer case. Originally a 6.5L diesel truck. Now behind a 96 5.7L Vortec.
$400 for trans with bellhousing

99 -3.42 open diff rear complete, 6-lug drum brakes,from my 99 2dr Tahoe, same as 4x4 pick-up 10 bolt 100K $250

95 -3.42 G80 locking rear diff for 2wd 5 lug drum brakes, complete 10 bolt rare 2wd locker $400

96- 3.73 14 bolt open diff 8-lug from c2500 $250

2001 4.10 G80 disc brakes 8-lug 14 bolt from K2500HD Also have matching front diff with 4.10s $650 for rear

Rear sway bars from 99 4x4 Tahoes. 2 available. With links and brackets
$50 each

94 red bench seat with fold down armrest for driver, great condition $250

96 tan power door panels all trim available

96 tilt & cruise auto steering column.

For more info on any of these parts IM me or post here. Engines, tranny and parts I can ship at buyer's expense. Cabs and beds must be picked up here in Broken Bow, OK 74728
Thanks

Custom 68 · 08-11-2004, 04:21 PM

that 6.0 l would sure be nice to get. A bit too far to drive right now to get it though.

grayw0lf · 08-11-2004, 04:35 PM

I'm interested in the Vortec heads for a good price.

*1972C10* · 08-11-2004, 06:35 PM

Would you swap a step bed for a fleet? Friend of mine has a 93 with a step bed needs tailgate but i imagine he would get one to swap He would prefer a fleetside /

99-2door · 08-11-2004, 11:52 PM

Quote:

Originally Posted by 1972C10

Would you swap a step bed for a fleet? Friend of mine has a 93 with a step bed needs tailgate but i imagine he would get one to swap He would prefer a fleetside /

Yes, I would consider a swap. The bed needs to be pretty clean though. I have enough to choose from that we could find one in about the same condition.

99-2door · 08-12-2004, 01:02 AM

Quote:

Originally Posted by grayw0lf

I'm interested in the Vortec heads for a good price.

$250. complete with valve springs and rocker arms. Plus shipping to AL

*1972C10* · 08-12-2004, 01:36 AM

Im gonna talk to him tommmorow If you dont mind Pm me your zip so i can tell him a guestimation as to how far it is from here. His bed is in pretty good paintable shape He may just pay for a bed Ill talk to him tommorow and try to get pics of his bed If he wants to try to swap.

donkey69 · 08-12-2004, 02:17 AM

.....any stock rear bumpers??

my new 72 · 08-12-2004, 03:19 AM

What would you take for the serpentine stuff off of that 98 5.7. All the brackets, the alternator, water pump, etc. Let me know.

ItsNotABlazer · 08-12-2004, 02:36 PM

Jason is the 96 Vortec where it can be started up or is it already removed? Might be interested in it and the trans. Also anyone interested in any of these parts, I have met Jason before and he is a great person to deal with.

Brad

grayw0lf · 08-13-2004, 05:07 PM

What's the approx shipping cost on the Vortec Heads to 36067?

99-2door · 08-13-2004, 07:39 PM

Quote:

Originally Posted by 1972C10

Im gonna talk to him tommmorow If you dont mind Pm me your zip so i can tell him a guestimation as to how far it is from here. His bed is in pretty good paintable shape He may just pay for a bed Ill talk to him tommorow and try to get pics of his bed If he wants to try to swap.

You have a PM

99-2door · 08-13-2004, 07:54 PM

Quote:

Originally Posted by donkey69

.....any stock rear bumpers??

Chrome rear step bumper $125 plus shipping

I have a painted one too that needs a little work.

99-2door · 08-13-2004, 08:02 PM

Quote:

Originally Posted by my new 72

What would you take for the serpentine stuff off of that 98 5.7. All the brackets, the alternator, water pump, etc. Let me know.

$225 plus shipping (UPS actual) for all brackets, alternator, PS pump, AC compressor. The water pump was seeping, so I am gonna throw it away. Clutch & fan are gone.

99-2door · 08-13-2004, 08:11 PM

Quote:

Originally Posted by ItsNotABlazer

Jason is the 96 Vortec where it can be started up or is it already removed? Might be interested in it and the trans.
Brad

Brad, I still have all the wiring and cooling hooked up to the 96. The rear-end has been taken out so it can't drive around, but I can start it. The engine runs great. I had planned to use it for the 67 we talked about, just don't have much time to work on it. Decided to concentrate on the vette and get it finished.

99-2door · 08-13-2004, 09:42 PM

Quote:

Originally Posted by grayw0lf

What's the approx shipping cost on the Vortec Heads to 36067?

The heads weigh about 50 lbs each. UPS shows $46 to Prattville, AL

99-2door · 08-13-2004, 09:43 PM

ttt
Added some parts and some more $$ and info.

my new 72 · 08-14-2004, 12:58 AM

I'll let you know in a day or two. Thanks for the quick reply.

my new 72 · 08-14-2004, 02:03 PM

My wife went shopping today and spent $300 so I have to pass. No money for the truck this month. Thanks anyway.

donkey69 · 08-15-2004, 11:57 PM

Thanks 99-2door, but got lucky at a local swap meet this weekend and picked up a rear bumper! Thanks again!

apstguy · 08-16-2004, 06:03 PM

I'm interested in theSway bars - will 4X4 sway bars fit a 2wd?

99-2door · 08-17-2004, 03:24 AM

Quote:

Originally Posted by apstguy

I'm interested in theSway bars - will 4X4 sway bars fit a 2wd?

I think they are the same, don't know for sure. I can measure diameter if you need me to.

rambler · 08-17-2004, 11:22 AM

For my 54 chevy project I may be interested in a frame engine/tranny ECM etc.. combo... do you have anything like that? not looking for 4x4,,
Possilby the:
96 Complete 5.7L Vortec Injection and harness, all accesories and 4L80e 100K
$1750

00 5.3L Complete with accesories and harness +ECM 98K $1750

95 -3.42 G80 locking rear diff for 2wd 5 lug drum brakes, complete 10 bolt rare 2wd locker $400

I've heard,, I can "almost" bolt my body on the frame of the newer chevys...

99-2door · 08-19-2004, 09:22 AM

Quote:

Originally Posted by rambler

For my 54 chevy project I may be interested in a frame engine/tranny ECM etc.. combo... do you have anything like that? not looking for 4x4,,
Possilby the:
96 Complete 5.7L Vortec Injection and harness, all accesories and 4L80e 100K
$1750

00 5.3L Complete with accesories and harness +ECM 98K $1750

95 -3.42 G80 locking rear diff for 2wd 5 lug drum brakes, complete 10 bolt rare 2wd locker $400

I've heard,, I can "almost" bolt my body on the frame of the newer chevys...

I have a frame for ext. cab SWB 88-98 and one for reg cab SWB. Both 2wd. Is that what you are looking for?

hammered94 · 08-20-2004, 05:07 PM

Do you happen to have any grey buckets and door panels from 95-99, I am looking for leather, also i need a tight steering box and a radiator for a 94 5.7 w/28 inch core. thanks

08-11-2004, 04:05 PM	#1
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Lots of 88-04 Stuff for sale Have the folowing items for sale: 96 5.0L vortec with 4L60e auto 96 Short fleet bed red with black 2-tone $400 98 Short fleet bed Green with tan 2-tone $500 96 Complete 5.7L Vortec Injection and harness, all accesories and 4L80e 100K $1750 01 6.0L Engine complete with all accessories and harness +ECM 115K $1950 (Matching steering column, dash harness and BCM available) 01 4L80e 4x4 with manual shift transfer case. $700 94 NV4500 from K3500 with transfer case. Originally a 6.5L diesel truck. Now behind a 96 5.7L Vortec. $400 for trans with bellhousing 99 -3.42 open diff rear complete, 6-lug drum brakes,from my 99 2dr Tahoe, same as 4x4 pick-up 10 bolt 100K $250 95 -3.42 G80 locking rear diff for 2wd 5 lug drum brakes, complete 10 bolt rare 2wd locker $400 96- 3.73 14 bolt open diff 8-lug from c2500 $250 2001 4.10 G80 disc brakes 8-lug 14 bolt from K2500HD Also have matching front diff with 4.10s $650 for rear Rear sway bars from 99 4x4 Tahoes. 2 available. With links and brackets $50 each 94 red bench seat with fold down armrest for driver, great condition $250 96 tan power door panels all trim available 96 tilt & cruise auto steering column. For more info on any of these parts IM me or post here. Engines, tranny and parts I can ship at buyer's expense. Cabs and beds must be picked up here in Broken Bow, OK 74728 Thanks __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip Last edited by 99-2door; 11-30-2004 at 07:33 PM.

08-11-2004, 04:21 PM	#2
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,930	that 6.0 l would sure be nice to get. A bit too far to drive right now to get it though. __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

08-11-2004, 04:35 PM	#3
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	I'm interested in the Vortec heads for a good price. __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

08-12-2004, 02:17 AM	#8
donkey69 JB-80 &quot;Twice as Good&quot; Join Date: Jun 2004 Location: Central, MN Posts: 354	.....any stock rear bumpers?? __________________ HEY NOW!

08-12-2004, 03:19 AM	#9
my new 72 faster, faster, faster Join Date: Dec 2001 Location: Houston ,Texas ,USA Posts: 1,354	What would you take for the serpentine stuff off of that 98 5.7. All the brackets, the alternator, water pump, etc. Let me know. __________________ I'm going to Law School, wanna debate? It's good practice.

08-11-2004, 06:35 PM	#4
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Would you swap a step bed for a fleet? Friend of mine has a 93 with a step bed needs tailgate but i imagine he would get one to swap He would prefer a fleetside /

08-12-2004, 01:36 AM	#7
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Im gonna talk to him tommmorow If you dont mind Pm me your zip so i can tell him a guestimation as to how far it is from here. His bed is in pretty good paintable shape He may just pay for a bed Ill talk to him tommorow and try to get pics of his bed If he wants to try to swap.

08-12-2004, 02:36 PM	#10
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Jason is the 96 Vortec where it can be started up or is it already removed? Might be interested in it and the trans. Also anyone interested in any of these parts, I have met Jason before and he is a great person to deal with. Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

08-13-2004, 05:07 PM	#11
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	What's the approx shipping cost on the Vortec Heads to 36067? __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

08-13-2004, 09:43 PM	#17
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	ttt Added some parts and some more $$ and info. __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

08-14-2004, 12:58 AM	#18
my new 72 faster, faster, faster Join Date: Dec 2001 Location: Houston ,Texas ,USA Posts: 1,354	I'll let you know in a day or two. Thanks for the quick reply. __________________ I'm going to Law School, wanna debate? It's good practice.

08-14-2004, 02:03 PM	#19
my new 72 faster, faster, faster Join Date: Dec 2001 Location: Houston ,Texas ,USA Posts: 1,354	My wife went shopping today and spent $300 so I have to pass. No money for the truck this month. Thanks anyway. __________________ I'm going to Law School, wanna debate? It's good practice.

08-15-2004, 11:57 PM	#20
donkey69 JB-80 &quot;Twice as Good&quot; Join Date: Jun 2004 Location: Central, MN Posts: 354	Thanks 99-2door, but got lucky at a local swap meet this weekend and picked up a rear bumper! Thanks again! __________________ HEY NOW!

08-16-2004, 06:03 PM	#21
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	I'm interested in theSway bars - will 4X4 sway bars fit a 2wd? __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

08-17-2004, 11:22 AM	#23
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	For my 54 chevy project I may be interested in a frame engine/tranny ECM etc.. combo... do you have anything like that? not looking for 4x4,, Possilby the: 96 Complete 5.7L Vortec Injection and harness, all accesories and 4L80e 100K $1750 00 5.3L Complete with accesories and harness +ECM 98K $1750 95 -3.42 G80 locking rear diff for 2wd 5 lug drum brakes, complete 10 bolt rare 2wd locker $400 I've heard,, I can "almost" bolt my body on the frame of the newer chevys... __________________ No matter where you are..... There you are... Buckaroo Banzi



Register or Log In To remove these advertisements.

08-20-2004, 05:07 PM	#25
hammered94 Registered User Join Date: Jul 2003 Location: OK Posts: 92	Do you happen to have any grey buckets and door panels from 95-99, I am looking for leather, also i need a tight steering box and a radiator for a 94 5.7 w/28 inch core. thanks

Register or Log In To remove these advertisements.