CA Parting 92 Chevy 2500 4x4 Diesel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 05-14-2010, 12:56 PM

Diesel motor is junk.
Transmission and front clip SOLD.

Doors completer $50 each LOCAL.
Grey 60/40 seat $100 LOCAL.
Tilt Steering column with key $75 PLUS Shipping.
Hydroboost with, ABS, $100 Plus shipping.
Turbo $25 Plus shipping.
Diesel starter $30 plus shipping.
Reciever hitch $40 plus shipping.

bigred94 · 05-14-2010, 08:43 PM

Hey, interested in the fender flares if their in good shape what would you want for them? and if the instrument panel trim is grey how much for it?

KrazyRay · 05-16-2010, 10:12 AM

Sorry, the flares went with the front clip. Thanks, Ray

**special-K** · 05-17-2010, 05:38 AM

Will you sell the driver`s exterior door handle,if in good shape?How about the passenger side cowl vent louver?

**wancosc356** · 05-17-2010, 06:21 AM

Do you have the air box to turbo tubing, the driver side rear bumper step pad, the pair of grey visors?

Ill also jump in line on the driver door handle and cowl vent louver.

I also could use the hydroboost reservoir cover. Just don't need the whole setup.

cnshoot · 05-17-2010, 11:05 PM

i need the engine wiring harness real bad for my 93 not sure if you still have all of it please let me know and might need the puter also

KrazyRay · 05-17-2010, 11:39 PM

I'm out of town right now so I will check on all parts ASAP. Thanks for your patience.
special K- I want to keep the doors complete right now. The p.s. cowl vent- if it is the short piece that comes off to remove the front clip, $10 plus shipping but let me double check to see if there is any damage to it.
wancosc356- I want to leave the hydro boost complete, I will check on the visors, step pad, and turbo tubing. Most of the top engine parts are scattered in the bed.
cnshoot- If the engine wiring harness is good $30 plus shipping. I will check ASAP.
Thanks, Ray

**special-K** · 05-18-2010, 07:44 AM

Thanks,I`ll pass.I mostly need the handle.

KrazyRay · 05-19-2010, 01:11 PM

Quote:

Originally Posted by wancosc356

Do you have the air box to turbo tubing, the driver side rear bumper step pad, the pair of grey visors?

Ill also jump in line on the driver door handle and cowl vent louver.

I also could use the hydroboost reservoir cover. Just don't need the whole setup.

I checked the truck and the bumper pad has a chunk missing. The grey visors are dirty but not ripped. The cowl is good and the turbo tube is good (L shaped). I can do $45 shipped for everything. For $55 total shipped, I can throw in the KN air filter with the other stuff.
I will be away until Sun. Thanks, Ray

KrazyRay · 05-19-2010, 01:13 PM

Quote:

Originally Posted by cnshoot

i need the engine wiring harness real bad for my 93 not sure if you still have all of it please let me know and might need the puter also

The harness is good. $46 shipped. Thanks, Ray

**wancosc356** · 05-19-2010, 10:06 PM

Quote:

Originally Posted by KrazyRay

I checked the truck and the bumper pad has a chunk missing. The grey visors are dirty but not ripped. The cowl is good and the turbo tube is good (L shaped). I can do $45 shipped for everything. For $55 total shipped, I can throw in the KN air filter with the other stuff.
I will be away until Sun. Thanks, Ray

What do u mean by, a chunk missing? Could u get me some pics of the other parts?

Also, is the gas pedal assembly a cable setup or an electronic setup? If electronic, could u get me a pic of it?

Thanks.

71meangreenc10 · 05-22-2010, 07:36 PM

How much for the steering wheel with button and horn contact?

Smitty

KrazyRay · 05-23-2010, 09:25 AM

Quote:

Originally Posted by wancosc356

What do u mean by, a chunk missing? Could u get me some pics of the other parts?

Also, is the gas pedal assembly a cable setup or an electronic setup? If electronic, could u get me a pic of it?

Thanks.

It looked like someone backed into a trailer coupler and dented the bumper and took a piece of the pad above the dent. I will have answers and pics later today. Thanks, Ray

KrazyRay · 05-23-2010, 09:26 AM

Quote:

Originally Posted by 71meangreenc10

How much for the steering wheel with button and horn contact?

Smitty

I can do $35 shipped to NC. Thanks, Ray

71meangreenc10 · 05-23-2010, 11:10 AM

Ill take it. Send payment info.

Smitty

KrazyRay · 05-23-2010, 03:38 PM

Pics.

KrazyRay · 05-23-2010, 03:43 PM

more pics.

71meangreenc10 · 05-23-2010, 04:55 PM

Looks good, need payment info.

Smitty

HarrisonTX · 05-23-2010, 06:22 PM

I'd like those tow hooks off the front end. The factory black hooks.
If you wouldnt mind PMing me a price, or something.

I may forget to check this thread again, but I do want those.

*Stitch* · 05-23-2010, 09:36 PM

how much do you want for the upper and lower intake, both exhaust manifolds, exhaust cross over, turbo, injectors...pretty much everything to put the turbo on my 6.2...shipped to a business address 29150...thanks Ray

edit: also, does it have a serpentine belt system on the front of it?

KrazyRay · 05-23-2010, 09:56 PM

71meangreenc10-pm sent
HarrisonTX- $31 shipped on the tow hooks pm sent
Thanks, Ray

71meangreenc10 · 05-23-2010, 10:15 PM

Paypal sent.

Thanks

Smitty

KrazyRay · 05-23-2010, 10:22 PM

Quote:

Originally Posted by Fat Hoe

how much do you want for the upper and lower intake, both exhaust manifolds, exhaust cross over, turbo, injectors...pretty much everything to put the turbo on my 6.2...shipped to a business address 29150...thanks Ray

edit: also, does it have a serpentine belt system on the front of it?

Chuck, I'm looking at $100 plus shipping for the turbo related parts but wancosc356 is first up on the turbo tube. The shipping will be pricey...probably around $40-$50. If that works, I will gather up the parts to make sure it is what you want. Most of them are scattered in the bed. It has a serpentine belt system. Do you need just the pulleys and tensioner?
Thanks, Ray

*Stitch* · 05-23-2010, 10:54 PM

I would love to get the setup for the turbo for that price plus the shipping...also, I need the pulleys, the tensioner, and also the high output water crossover...it should have two thermostats in it, I think...thanks again Ray...

edit: also, do you know what turbo that is GM-?

edit again: looks like I need these things for the turbo swap...thanks Ray

1)turbo
2)turbo exhaust manifold
3)exhaust crossover pipe
4)exhaust downpipe
5)oil feed line
6)oil drain plate and drain tube
7)airfilter
8)CDR hookup...this looks like a tuna can on the front of the top of the motor
9)upper and lower 6.5 intake
10)injectors
11)injector lines from the injection pump

if you don't have all of this, that's cool...I'd like to have everything that you have on the list though...thanks

**wancosc356** · 05-23-2010, 11:46 PM

The turbo tube looks good. It doesn't have any rips/tears/holes anywhere does it?

Were you able to get a pic of the passenger side cowl piece?

Also, is the gas pedal assembly a cable setup or an electronic setup? If electronic, could u get me a pic of it? My truck is throwing a Throttle Position Sensor code.

Im gonna pass on the visors and the K&N filter.

05-14-2010, 12:56 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 92 Chevy 2500 4x4 Diesel Diesel motor is junk. Transmission and front clip SOLD. Doors completer $50 each LOCAL. Grey 60/40 seat $100 LOCAL. Tilt Steering column with key $75 PLUS Shipping. Hydroboost with, ABS, $100 Plus shipping. Turbo $25 Plus shipping. Diesel starter $30 plus shipping. Reciever hitch $40 plus shipping. Attached Images Last edited by KrazyRay; 05-15-2010 at 12:12 AM.

05-14-2010, 08:43 PM	#2
bigred94 Registered User Join Date: Feb 2010 Location: Pembroke, VA Posts: 45	Re: Parting 92 Chevy 2500 4x4 Diesel Hey, interested in the fender flares if their in good shape what would you want for them? and if the instrument panel trim is grey how much for it?

05-16-2010, 10:12 AM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 92 Chevy 2500 4x4 Diesel Sorry, the flares went with the front clip. Thanks, Ray

05-17-2010, 05:38 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Parting 92 Chevy 2500 4x4 Diesel Will you sell the driver`s exterior door handle,if in good shape?How about the passenger side cowl vent louver? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-17-2010, 06:21 AM	#5
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Parting 92 Chevy 2500 4x4 Diesel Do you have the air box to turbo tubing, the driver side rear bumper step pad, the pair of grey visors? Ill also jump in line on the driver door handle and cowl vent louver. I also could use the hydroboost reservoir cover. Just don't need the whole setup. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

05-17-2010, 11:05 PM	#6
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	Re: Parting 92 Chevy 2500 4x4 Diesel i need the engine wiring harness real bad for my 93 not sure if you still have all of it please let me know and might need the puter also __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4

05-17-2010, 11:39 PM	#7
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 92 Chevy 2500 4x4 Diesel I'm out of town right now so I will check on all parts ASAP. Thanks for your patience. special K- I want to keep the doors complete right now. The p.s. cowl vent- if it is the short piece that comes off to remove the front clip, $10 plus shipping but let me double check to see if there is any damage to it. wancosc356- I want to leave the hydro boost complete, I will check on the visors, step pad, and turbo tubing. Most of the top engine parts are scattered in the bed. cnshoot- If the engine wiring harness is good $30 plus shipping. I will check ASAP. Thanks, Ray

05-18-2010, 07:44 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Parting 92 Chevy 2500 4x4 Diesel Thanks,I`ll pass.I mostly need the handle. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-22-2010, 07:36 PM	#12
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,158	Re: Parting 92 Chevy 2500 4x4 Diesel How much for the steering wheel with button and horn contact? Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 71 C20 Longhorn/Ole Yellor 69 C30 Former Motor Home, Flat Bed time

05-23-2010, 11:10 AM	#15
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,158	Re: Parting 92 Chevy 2500 4x4 Diesel Ill take it. Send payment info. Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 71 C20 Longhorn/Ole Yellor 69 C30 Former Motor Home, Flat Bed time Last edited by 71meangreenc10; 05-23-2010 at 11:13 AM.

05-23-2010, 03:38 PM	#16
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 92 Chevy 2500 4x4 Diesel Pics. Attached Images

05-23-2010, 03:43 PM	#17
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 92 Chevy 2500 4x4 Diesel more pics. Attached Images

05-23-2010, 04:55 PM	#18
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,158	Re: Parting 92 Chevy 2500 4x4 Diesel Looks good, need payment info. Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 71 C20 Longhorn/Ole Yellor 69 C30 Former Motor Home, Flat Bed time

05-23-2010, 06:22 PM	#19
HarrisonTX Registered User Join Date: Nov 2003 Location: Waco TX Posts: 247	Re: Parting 92 Chevy 2500 4x4 Diesel I'd like those tow hooks off the front end. The factory black hooks. If you wouldnt mind PMing me a price, or something. I may forget to check this thread again, but I do want those. __________________ '69 custom/camper '74 260z 302 chevy/tko500 swap in progrss '79 Malibu 355 all forged 4 speed car. '86 k5 blazer '06 Duramax

05-23-2010, 09:36 PM	#20
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Parting 92 Chevy 2500 4x4 Diesel how much do you want for the upper and lower intake, both exhaust manifolds, exhaust cross over, turbo, injectors...pretty much everything to put the turbo on my 6.2...shipped to a business address 29150...thanks Ray edit: also, does it have a serpentine belt system on the front of it? Last edited by Stitch; 05-23-2010 at 09:41 PM.



Register or Log In To remove these advertisements.

05-23-2010, 09:56 PM	#21
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 92 Chevy 2500 4x4 Diesel 71meangreenc10-pm sent HarrisonTX- $31 shipped on the tow hooks pm sent Thanks, Ray

05-23-2010, 10:15 PM	#22
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,158	Re: Parting 92 Chevy 2500 4x4 Diesel Paypal sent. Thanks Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 71 C20 Longhorn/Ole Yellor 69 C30 Former Motor Home, Flat Bed time

05-23-2010, 10:54 PM	#24
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Parting 92 Chevy 2500 4x4 Diesel I would love to get the setup for the turbo for that price plus the shipping...also, I need the pulleys, the tensioner, and also the high output water crossover...it should have two thermostats in it, I think...thanks again Ray... edit: also, do you know what turbo that is GM-? edit again: looks like I need these things for the turbo swap...thanks Ray 1)turbo 2)turbo exhaust manifold 3)exhaust crossover pipe 4)exhaust downpipe 5)oil feed line 6)oil drain plate and drain tube 7)airfilter 8)CDR hookup...this looks like a tuna can on the front of the top of the motor 9)upper and lower 6.5 intake 10)injectors 11)injector lines from the injection pump if you don't have all of this, that's cool...I'd like to have everything that you have on the list though...thanks Last edited by Stitch; 05-24-2010 at 12:33 AM.

05-23-2010, 11:46 PM	#25
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Parting 92 Chevy 2500 4x4 Diesel The turbo tube looks good. It doesn't have any rips/tears/holes anywhere does it? Were you able to get a pic of the passenger side cowl piece? Also, is the gas pedal assembly a cable setup or an electronic setup? If electronic, could u get me a pic of it? My truck is throwing a Throttle Position Sensor code. Im gonna pass on the visors and the K&N filter. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.