The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-27-2009, 11:10 PM   #1
bsm78
Registered User
 
Join Date: Dec 2009
Location: Hazlehurst, Ga
Posts: 132
$450 find

Ok i know its ugly but im in it for the stuff under the hood and the trans.
the guys said she had not been ran for a few years. maybe close to 2000.
the gas smelt like it was mixed half with water. after a few times of pulling the breather and pouring gas in carb it fired up and back fired a lil then started counting them off at a nice idle. edelbrock 750 and rpm performer intake. i dont know much about the rest but also has a power steering box that i will prob part with since mine has one. from my understanding the rear end has problems and is why the truck was parked.









bsm78 is offline   Reply With Quote
Old 12-27-2009, 11:19 PM   #2
jablack
Classic Chevy Recycler
 
jablack's Avatar
 
Join Date: Dec 2007
Location: Alabama
Posts: 422
Re: $450 find

Looks like a nice one. Do you need the bed?
__________________


2004 Chevrolet Trailblazer EXT
1970 Chevrolet C50
1979 Chevrolet C30

Need another 67 or 68 soon...
jablack is offline   Reply With Quote
Old 12-27-2009, 11:36 PM   #3
bsm78
Registered User
 
Join Date: Dec 2009
Location: Hazlehurst, Ga
Posts: 132
Re: $450 find

nope its available. tailgate looks good except for a rust threw line across the bottom of the inside.

Last edited by bsm78; 12-27-2009 at 11:38 PM.
bsm78 is offline   Reply With Quote
Old 12-27-2009, 11:39 PM   #4
bsm78
Registered User
 
Join Date: Dec 2009
Location: Hazlehurst, Ga
Posts: 132
Re: $450 find

while running i can see the flywheel spinning but when i change the gear shift nothing happens. the driveshaft also does not turn.
bsm78 is offline   Reply With Quote
Old 12-27-2009, 11:43 PM   #5
srea76
Registered User
 
srea76's Avatar
 
Join Date: Nov 2009
Location: Hazlehurst, Ga.
Posts: 822
Re: $450 find

sounds good. I need to come over with my sawall and cut that top off.
srea76 is offline   Reply With Quote
Old 12-27-2009, 11:49 PM   #6
jake wells
Account Suspended
 
Join Date: Sep 2009
Location: No Longer Here
Posts: 352
Re: $450 find

Quote:
Originally Posted by bsm78 View Post
while running i can see the flywheel spinning but when i change the gear shift nothing happens. the driveshaft also does not turn.
sounds like a auto check the atf level. it could be low or there could be none at all.

also check the gear shift linkage and properly adjust it if necessary.
jake wells is offline   Reply With Quote
Old 12-28-2009, 12:42 AM   #7
po_bird
Registered User
 
po_bird's Avatar
 
Join Date: Oct 2005
Location: MUSKOGEE, OK
Posts: 229
Re: $450 find

also check the modulator valve, but it is a good buy. i would have paid 450 for it.

Last edited by po_bird; 12-28-2009 at 12:44 AM.
po_bird is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com