Fuel Injection for my 454 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

snj8198 · 03-30-2012, 10:24 AM

Humbly, I have Edelbrock's first and second gen Pro Flo series experience. I have no dyno experience, only 6 years of shade tree set up and diagnostic experience. I have found that the Pro Flo is an expensive but decent multi-port full management system. But I had issues with their ignition system (their fault), electrical (my fault), and fuel system (both). If I had an option I would go with a stand alone ignition system over a full management system.

-steve

03-30-2012, 10:24 AM	#10
snj8198 Registered User Join Date: Feb 2007 Location: Star Valley, WY Posts: 2,038	Re: Fuel Injection for my 454 Humbly, I have Edelbrock's first and second gen Pro Flo series experience. I have no dyno experience, only 6 years of shade tree set up and diagnostic experience. I have found that the Pro Flo is an expensive but decent multi-port full management system. But I had issues with their ignition system (their fault), electrical (my fault), and fuel system (both). If I had an option I would go with a stand alone ignition system over a full management system. -steve __________________ Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.