Warning: Picture not suitable for some! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 02-02-2011, 07:48 PM

When you find house nuts on a vehicle, you know you're in for a treat!

502ss · 02-02-2011, 07:48 PM

Nothing a good pair of side cutters can't solve!
Posted via Mobile Device

RCbowtie69 · 02-02-2011, 08:50 PM

all bad, but can be fix

VDOG · 02-02-2011, 08:52 PM

Quote:

Originally Posted by doctrouble

wait..... that's not normal?....

Ditto!!

JasonBird · 02-02-2011, 09:34 PM

maybe they were going for function....mine looks nearly as bad! lol, they didn't use wire nuts on mine, they just wrapped it around the e-brake lever!

Frkypunk70 · 02-02-2011, 09:45 PM

LOL... I had the same type of mess to deal with, wire nuts and all. It looked like a 16 year old drunk kid wired it. Straightened it out though. Then I quickly became the drunk adult trying to fix it all.

BadaSs_Cal · 02-02-2011, 10:20 PM

Just did this last summer.. took me about a week ( after work a couple hours a night). I found a pair of tweezers works well to remove the clips holding the wires to the connectors.. just push it in from the front to depress the clip and yank the wire out from behind... a nice kid at pick n pull only charged me 17.99 for a full harness with all the acc. so I made 2=1... It will be a good project to learn what each wire in your truck does.. I pretty much know where each one goes now and how it was routed.. Good luck!

wwotr · 02-02-2011, 10:20 PM

Quote:

Originally Posted by lakeroadster

Wire nuts? Really?

That's pretty much what the Mechanic said, that was working on it....

RBC67 · 02-02-2011, 10:34 PM

The same guy wired my old house!

Rich 5150 69 · 02-02-2011, 10:40 PM

Quote:

Originally Posted by Sir Fisher

at least some of them have labels, i don't see why your complaining?!?!?

Microwave oven label don`t count......

notrailerqueens · 02-02-2011, 10:51 PM

hey man looks almost the same! well mine has a lil more wirenuts, masking tape and duct tape. and you got labels too! hahaha good luck man!

71Sixer · 02-02-2011, 11:01 PM

Guess the foreman took off on the job that day HaHa!

Bad70sbchevy · 02-02-2011, 11:02 PM

Shoot, all you need now is some household switches to go along with the wirenuts.

xb9rguy · 02-02-2011, 11:16 PM

Quote:

Originally Posted by Bad70sbchevy

Shoot, all you need now is some household switches to go along with the wirenuts.

Now that would be funny^^^^

**truckster** · 02-03-2011, 12:08 AM

Quote:

Cut the blue one!!!! ......or was it the white one? lol

Always cut the blue one.

No, wait. Never cut the blue one.

Or was it...?

Man, I wish I had paid more attention in that IED class.

5150.4.67 · 02-03-2011, 12:20 AM

At least you haven't said to your buddy in the passenger seat "You smell something burning?"

OldSkool71 · 02-03-2011, 12:25 AM

Quote:

Originally Posted by rou

Hurry McGruber, we only have 10 seconds!

Classic Bowties · 02-03-2011, 04:07 AM

Quote:

Originally Posted by wwotr

NOW THAT I HAVE YOUR ATTENTION!

No kidding!

That catchy title caught 1000 hits in ten hours, some threads go two weeks without even 100 views. Mel

Jeffs70 · 02-03-2011, 04:23 AM

looks like an electrician that was on vacation and didnt want to be bothered LOL

steelscout · 02-03-2011, 04:23 AM

Wires scare me :O
Posted via Mobile Device

Jeffs70 · 02-03-2011, 04:25 AM

LOL this is the exact reason I ripped all the wires out of my truck and started with new!!!

evilways · 02-03-2011, 04:51 AM

That’s exactly how mine looked the day I brought my truck home, the bad part was, mine was actually an EZ harness and that’s how it looked. Had to cut and re crimp and heat shrink every connection front to back.

**DANTIP** · 02-03-2011, 06:35 AM

When I saw the picture, I heard that music that is played in horror movies! I can't go back to sleep now!

sixtyeightchevykid · 02-03-2011, 10:28 AM

dang i cant come up with anything clever to say, everything has been said already. good luck

justagoodolboy · 02-03-2011, 02:03 PM

And I thought I had some hacked up wiring!

02-02-2011, 07:48 PM	#26
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,135	Re: Warning: Picture not suitable for some! When you find house nuts on a vehicle, you know you're in for a treat! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-02-2011, 07:48 PM	#27
502ss Registered User Join Date: Jun 2010 Location: Sandown, NH Posts: 419	Re: Warning: Picture not suitable for some! Nothing a good pair of side cutters can't solve! Posted via Mobile Device __________________ -------------------------------------------------------- 1984 CC Dually - 454 - TH400 - Western Hauler Edition Big plans are coming! My build thread HERE

02-02-2011, 08:50 PM	#28
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: Warning: Picture not suitable for some! all bad, but can be fix

02-02-2011, 09:34 PM	#30
JasonBird '67 C-10 LWB Driver Join Date: Dec 2010 Location: Andover, Kansas Posts: 380	Re: Warning: Picture not suitable for some! maybe they were going for function....mine looks nearly as bad! lol, they didn't use wire nuts on mine, they just wrapped it around the e-brake lever! __________________ '67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad!

02-02-2011, 09:45 PM	#31
Frkypunk70 Registered User Join Date: Mar 2010 Location: Scranton,Pa Posts: 423	Re: Warning: Picture not suitable for some! LOL... I had the same type of mess to deal with, wire nuts and all. It looked like a 16 year old drunk kid wired it. Straightened it out though. Then I quickly became the drunk adult trying to fix it all.

02-02-2011, 10:20 PM	#32
BadaSs_Cal Registered User Join Date: Feb 2010 Location: Walnut Grove, Ca Posts: 216	Re: Warning: Picture not suitable for some! Just did this last summer.. took me about a week ( after work a couple hours a night). I found a pair of tweezers works well to remove the clips holding the wires to the connectors.. just push it in from the front to depress the clip and yank the wire out from behind... a nice kid at pick n pull only charged me 17.99 for a full harness with all the acc. so I made 2=1... It will be a good project to learn what each wire in your truck does.. I pretty much know where each one goes now and how it was routed.. Good luck! __________________ 66 Gmc 1 ton. Long Step 351e V6 69 1/2 CHEVROLET (now a shortbed) LONGBED!:devil 61 Shortbed Fleetside 1/2 ton.. in progress Next a 50-53! MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=447926

02-02-2011, 10:34 PM	#34
RBC67 Member Join Date: Sep 2009 Location: Pittsburgh, PA Posts: 107	Re: Warning: Picture not suitable for some! The same guy wired my old house! __________________ 69 C10 SWB 406 SBC 08 Silverado HD 2500 LWB Crew Cab Diesel. 06 Trail Blazer SS (Wife's Daily Driver) 67 RS/SS G-Machine http://www.hubgarage.com/mygarage/RBC67

02-02-2011, 10:51 PM	#36
notrailerqueens Registered User Join Date: Oct 2010 Location: Spring, TX Posts: 233	Re: Warning: Picture not suitable for some! hey man looks almost the same! well mine has a lil more wirenuts, masking tape and duct tape. and you got labels too! hahaha good luck man! __________________ Lindsey Rae 85' chevy long box, built by a girl! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=429956

02-02-2011, 11:01 PM	#37
71Sixer Registered User Join Date: Nov 2010 Location: Fenton, MO Posts: 151	Re: Warning: Picture not suitable for some! Guess the foreman took off on the job that day HaHa!

02-02-2011, 11:02 PM	#38
Bad70sbchevy Registered User Join Date: Aug 2009 Location: Newberry,FL Posts: 277	Re: Warning: Picture not suitable for some! Shoot, all you need now is some household switches to go along with the wirenuts. __________________ 1970 Chevrolet C-10 w/355sbc 2010 Silverado Daily Driver 1971 Mercedes 280sl project car

02-03-2011, 12:20 AM	#41
5150.4.67 Registered User Join Date: Dec 2007 Location: Modesto, Ca Posts: 411	Re: Warning: Picture not suitable for some! At least you haven't said to your buddy in the passenger seat "You smell something burning?"

02-03-2011, 04:23 AM	#44
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: Warning: Picture not suitable for some! looks like an electrician that was on vacation and didnt want to be bothered LOL __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

02-03-2011, 04:23 AM	#45
steelscout Words under my name Join Date: Nov 2010 Location: Lakewood, Washington Posts: 181	Re: Warning: Picture not suitable for some! Wires scare me :O Posted via Mobile Device __________________ 69 Chevy CST/10 "Project: Bloody Knuckles" my slow going project. 2010 VW Golf, daily driver Wrench Rookie

02-03-2011, 04:25 AM	#46
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: Warning: Picture not suitable for some! LOL this is the exact reason I ripped all the wires out of my truck and started with new!!! __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

02-03-2011, 04:51 AM	#47
evilways Registered User Join Date: Mar 2008 Location: Lafayette, IN Posts: 226	Re: Warning: Picture not suitable for some! That’s exactly how mine looked the day I brought my truck home, the bad part was, mine was actually an EZ harness and that’s how it looked. Had to cut and re crimp and heat shrink every connection front to back. __________________ Mark 1967 C/10 stepside lwb daily driver 1968 C/10 fleetside lwb parts truck 1971 Cheyenne Super swb project



Register or Log In To remove these advertisements.

02-03-2011, 06:35 AM	#48
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,880	Re: Warning: Picture not suitable for some! When I saw the picture, I heard that music that is played in horror movies! I can't go back to sleep now!

02-03-2011, 10:28 AM	#49
sixtyeightchevykid Registered User Join Date: Jan 2010 Location: Stillwater, Oklahoma Posts: 194	Re: Warning: Picture not suitable for some! dang i cant come up with anything clever to say, everything has been said already. good luck

02-03-2011, 02:03 PM	#50
justagoodolboy Under Construction Join Date: Sep 2009 Location: Summersville MO Posts: 176	Re: Warning: Picture not suitable for some! And I thought I had some hacked up wiring! __________________ 72 chevy 4x4-my project 67-72chevytrucks.com/vboard/showthread.php?t=368210 94 Nissan 4x4-Daily Driver and off road beater 03 Saab 9-3 -tripper 90 Polaris Trail Boss- 2 Stroker

Register or Log In To remove these advertisements.