C10CJ: A Pro-touring '71 Stepside on a No Limit Pro-C10 Chassis

[1971_c10]

Hey guys, after the C10 Nationals and during post-race inspections, I found the bottom rod ends on my front anti-rollbar links were bent.




Usually bent rod ends are caused by a mis-alignment situation. No different in my case. So after some playing with the suspension I found the cause of the mis-alignment. I walk through the whole process here. If you've got the flat bent bar arms that look like this:




Then you might want to watch this:

Bent Rod Ends Root Cause - YouTube