Hardest to find part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mgkgmc · 02-19-2020, 12:16 PM

Just was wondering what was the hardest part to find for your build? For me it was the rear seat brackets for the Jimmy and 1970 gold armrest that took almost two years to come across.

toolboxchev · 02-19-2020, 12:35 PM

A rust free rust free tailgate.

Killer Bee · 02-19-2020, 12:37 PM

longhorn camper shell

sick472 · 02-19-2020, 12:46 PM

Drip rail moldings have not crossed my path yet, nor has a Lund cab visor. Good thing I don't HAVE TO HAVE THEM.

67C10GS · 02-19-2020, 12:55 PM

a clean undented 67 gmc tailgate

Thealien · 02-19-2020, 02:42 PM

The whole rust free Blazer?

**1968k20** · 02-19-2020, 02:47 PM

Quote:

Originally Posted by sick472

Drip rail moldings have not crossed my path yet, nor has a Lund cab visor. Good thing I don't HAVE TO HAVE THEM.

Thought I saw a visor on eBay

**dagnabbitt** · 02-19-2020, 04:18 PM

I would like to submit the below, a 292 Upper thermostat housing.

Andy4639 · 02-19-2020, 04:28 PM

Pulleys for a short water pump with PS & AC. It took over a month of searching to get the right ones all in one spot.

**1968k20** · 02-19-2020, 05:53 PM

Suburban bucket seats

jaros44sr · 02-19-2020, 06:12 PM

A '72 cruise control stalk in chrome

**Orange71shorty** · 02-19-2020, 11:48 PM

Nice 67/68 chrome hubcaps

70c10-08 · 02-20-2020, 12:35 AM

So far a rust free non ac cab I got one lol,
the tool stowage compartment that goes under the bed they're hard to find complete so I decided to give up on finding one and,
the Custom Camper/10 emblems from 1969/1970 I may just get the dimensions and pics of that emblem and have them reproduced if it's legal to do so.

**68bowtie** · 02-20-2020, 12:46 AM

Quote:

Originally Posted by Orange71shorty

Nice 67/68 chrome hubcaps

Ditto

CG · 02-20-2020, 01:24 AM

Quote:

Originally Posted by 1968k20

Suburban bucket seats

Are Burb buckets any different from Blazer and truck buckets?

Or are you talking utility buckets?

**Classic v6 GMC's** · 02-20-2020, 02:10 AM

Quote:

Originally Posted by 67C10GS

a clean undented 67 gmc tailgate

I have a takeoff tailgate but I need a chunk of change to let it go

**71CHEVYSHORTBED402** · 02-20-2020, 10:19 AM

Quote:

Originally Posted by mgkgmc

Just was wondering what was the hardest part to find for your build? For me it was the rear seat brackets for the Jimmy and 1970 gold armrest that took almost two years to come across.

NICE find. In my case it's in my signature. I sorta don't get it, perhaps bad luck. Other than that, I can make a place for it should a mint cargo lamp kit come my way soon.

**michael bustamante** · 02-20-2020, 01:50 PM

a clean OEM 67GMC grill and topbar.
also good 67 gmc custom embems
am/fm radio
and a 67 GMC fawn dash (hinty hint)
oh and short step rear bumper gravel guards, {sit n top of the rear bumper brackets)
I find the fleets but never the steppers

**1968k20** · 02-20-2020, 02:59 PM

Quote:

Originally Posted by michael bustamante

a clean OEM 67GMC grill and topbar.
also good 67 gmc custom embems
am/fm radio
and a 67 GMC fawn dash (hinty hint)
oh and short step rear bumper gravel guards, {sit n top of the rear bumper brackets)
I find the fleets but never the steppers

I found a straight grill at the Redding U pull it for $12.50 about 7 years ago!

HeavyHauler · 02-20-2020, 03:29 PM

1968 Chevy C10 red steering wheel and dog dish hub caps for same. I didnt know how difficult they would be to find.

**michael bustamante** · 02-20-2020, 04:00 PM

Quote:

Originally Posted by 1968k20

I found a straight grill at the Redding U pull it for $12.50 about 7 years ago!

if youre using it s wall art, how much to have this in my hands?

OregonNed · 02-20-2020, 10:43 PM

Just a simple stock 12 bolt diff cover. An awesome member here hooked me up with one and sandblasted it for me. Nice saying goodbye to the rusty chrome on.

FL71C10 · 02-21-2020, 02:12 AM

Quote:

Originally Posted by michael bustamante

a clean OEM 67GMC grill and topbar.
also good 67 gmc custom embems
am/fm radio
and a 67 GMC fawn dash (hinty hint)
oh and short step rear bumper gravel guards, {sit n top of the rear bumper brackets)
I find the fleets but never the steppers

Tri-plus reproduces those bumper splash guards

http://www.keypartsonline.com/67-72-...-set-stepside/

**1968k20** · 02-21-2020, 07:45 AM

Quote:

Originally Posted by michael bustamante

if youre using it s wall art, how much to have this in my hands?

I sold it awhile ago

**ShortbedClayton** · 02-21-2020, 08:13 AM

Quote:

Originally Posted by sick472

Drip rail moldings have not crossed my path yet, nor has a Lund cab visor. Good thing I don't HAVE TO HAVE THEM.

I pulled super straight if I remember correctly drip rail moldings off a 1970 CST truck in a junkyard some years back... guy said wow I’m surprise you got them off without destroying them. Truck was in yard for 25 years... he gave em to me for 20$.. only got them becuse I had never seen them before..
Posted via Mobile Device

02-19-2020, 12:16 PM	#1
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,354	Hardest to find part Just was wondering what was the hardest part to find for your build? For me it was the rear seat brackets for the Jimmy and 1970 gold armrest that took almost two years to come across. Attached Images __________________ 1970 GMC 1500 stepside 1972 GMC Jimmy Custom 2004 Chevy Colorado 1989 Swb Silverado 1972 Aj's Stormer

02-19-2020, 12:35 PM	#2
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Hardest to find part A rust free rust free tailgate.

02-19-2020, 12:37 PM	#3
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,718	Re: Hardest to find part longhorn camper shell __________________ *I started out with nothing - and I still have most of it*

02-19-2020, 12:46 PM	#4
sick472 Registered User Join Date: Jul 2015 Location: Sedalia Mo. Posts: 1,130	Re: Hardest to find part Drip rail moldings have not crossed my path yet, nor has a Lund cab visor. Good thing I don't HAVE TO HAVE THEM. __________________ He who is without oil shall throw the first rod. Compressions 8.7:1 1972 C10 1976 C10 (parts truck) 1985 K20

02-19-2020, 12:55 PM	#5
67C10GS Registered User Join Date: Dec 2018 Location: Jerome, ID Posts: 77	Re: Hardest to find part a clean undented 67 gmc tailgate __________________ 1967 GMC C15 sb 6.0 lq4 pro daily. Named the “formula 10”

02-19-2020, 02:42 PM	#6
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,126	Re: Hardest to find part The whole rust free Blazer? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

02-19-2020, 04:18 PM	#8
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,295	Re: Hardest to find part I would like to submit the below, a 292 Upper thermostat housing. Attached Images __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

02-19-2020, 04:28 PM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Hardest to find part Pulleys for a short water pump with PS & AC. It took over a month of searching to get the right ones all in one spot. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-19-2020, 05:53 PM	#10
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: Hardest to find part Suburban bucket seats __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

02-19-2020, 06:12 PM	#11
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Hardest to find part A '72 cruise control stalk in chrome __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-19-2020, 11:48 PM	#12
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 528	Re: Hardest to find part Nice 67/68 chrome hubcaps

02-20-2020, 12:35 AM	#13
70c10-08 Registered User Join Date: Jul 2009 Location: Fairmont, Nebraska Posts: 546	Re: Hardest to find part So far a rust free non ac cab I got one lol, the tool stowage compartment that goes under the bed they're hard to find complete so I decided to give up on finding one and, the Custom Camper/10 emblems from 1969/1970 I may just get the dimensions and pics of that emblem and have them reproduced if it's legal to do so. Last edited by 70c10-08; 02-20-2020 at 02:08 PM.

02-20-2020, 01:50 PM	#18
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: Hardest to find part a clean OEM 67GMC grill and topbar. also good 67 gmc custom embems am/fm radio and a 67 GMC fawn dash (hinty hint) oh and short step rear bumper gravel guards, {sit n top of the rear bumper brackets) I find the fleets but never the steppers __________________ 1967custom

02-20-2020, 03:29 PM	#20
HeavyHauler Registered User Join Date: Nov 2011 Location: USA Posts: 373	Re: Hardest to find part 1968 Chevy C10 red steering wheel and dog dish hub caps for same. I didnt know how difficult they would be to find.

02-20-2020, 10:43 PM	#22
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Hardest to find part Just a simple stock 12 bolt diff cover. An awesome member here hooked me up with one and sandblasted it for me. Nice saying goodbye to the rusty chrome on. __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.