NC Leftover parts from a Blazer and my Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffg1010 · 03-20-2013, 05:58 AM

I had these listed on the truck side of the classifieds and noticed that most of the Blazer/ Suburban parts hadn't sold. I figured I'd see who in here was interested.

I have some stuff I need to get out of the way. I prefer not to ship the larger items

Hood for 69-72 - $100
Hood for 67-68 - $100
Grille for 67-68 - $80
Steering box off of 71 that I parted - $50
Front and rear driveshaft off of Blazer - $30/each.
Door hinges off of Blazer (assume they are the same as truck?) - $25
Lift gate hinges off of single wall Blazer top - $30
Hinge cover plates off of single wall top (have 3 good, 4th is bent) $25 for all
One Blazer single wall top hold down $15
Blazer single wall top windshield brackets -$25
Blazer Double wall top glass $50 each or both for $80
Blazer Double wall top $100 - (located in WV at my dads)
Clips for mounting dome light/switch plug to fiberglass on Blazer tops - $5/each
Blazer single wall top plug harness -SOLD - $30
Driver quality taillights $15
Driver quality backup lights $10
Tailgate hinges $20 -sold
Suburban Barn Door sliding mechanisms - $30
Stainless windshield wipers (both sides)- $25
Rearview mirror - $10
Door striker plates - $20 - (think thats what they are called)
Fuse block -$15

Let me know what you are looking at and I will get pics...
Posted via Mobile Device

**29od1** · 03-20-2013, 07:30 AM

Interested in the single wall top plug harness and door striker shims if you could post some pics.
Thanks

jjzepplin · 03-20-2013, 08:17 AM

Have you a rag joint with 3/4" shaft splines? Sorry if I've asked before just asking everyone on here.

Luis_gz06 · 03-20-2013, 01:08 PM

Interested in the front driveshaft if available. Thanks!

JeffD72 · 03-20-2013, 02:51 PM

interested in pics of the rearview mirror and windshield wipers

jeffg1010 · 03-20-2013, 03:14 PM

Requested pics...

Posted via Mobile Device

jeffg1010 · 03-20-2013, 03:14 PM

Quote:

Originally Posted by JeffD72

interested in pics of the rearview mirror and windshield wipers

I'll let you know if the local guy passes
Posted via Mobile Device

jeffg1010 · 03-20-2013, 05:28 PM

Quote:

Originally Posted by JeffD72

interested in pics of the rearview mirror and windshield wipers

m/albums/cc166/jeffg1010/3DE09DB2-F71A-40DB-890E-66EFEBB43C17-6571-000006A80E188A37_zpsa80506f9.jpg[/IMG]

Posted via Mobile Device

**29od1** · 03-20-2013, 08:08 PM

I'll pass on the strikers. But I'd do $30 shipped on the dome light harness assembly.
Thanks,
David

jeffg1010 · 03-20-2013, 09:55 PM

Quote:

Originally Posted by 29od1

I'll pass on the strikers. But I'd do $30 shipped on the dome light harness assembly.
Thanks,
David

Ok. I'll pm you PayPal info, and I don't know where to start on the strikers wanna make me an offer on them?

Shipping for just the dome light setup would be around $10.00 and $15.00 if you want the strikers since they are heavier.
Posted via Mobile Device

jeffg1010 · 03-22-2013, 08:18 PM

TTT. I'd like to move this stuff. Any offers?
Posted via Mobile Device

Luis_gz06 · 03-22-2013, 10:17 PM

Did you sold the front driveshaft?

**Blazerowner** · 03-29-2013, 07:53 PM

I'm interested in the top hold down brackets. Any pics? Do you have any other brackets or the chrome side pieces where it bolts to the bed? I need pretty much everything.

jeffg1010 · 05-19-2013, 09:45 AM

A few of the things that were pending sold haven't moved so I am bumping this back ttt.

Quote:

Originally Posted by Blazerowner

I'm interested in the top hold down brackets. Any pics? Do you have any other brackets or the chrome side pieces where it bolts to the bed? I need pretty much everything.

Are you still looking for these? I missed a couple responses.

Quote:

Originally Posted by Luis_gz06

Did you sold the front driveshaft?

Still have it
Posted via Mobile Device

**rockc** · 05-19-2013, 07:56 PM

Would you take $50 for the front and rear drive shafts shipped.
Thanks
Rock C

mesracer · 05-19-2013, 08:41 PM

I'll take the hinge cover plates. PM me your Paypal info. Thanks,
Posted via Mobile Device

jeffg1010 · 05-19-2013, 09:10 PM

Quote:

Originally Posted by mesracer

I'll take the hinge cover plates. PM me your Paypal info. Thanks,
Posted via Mobile Device

I tried to PAYPAL ya but it says your inbox is full. Come to think of it, mine is getting close too!

Quote:

Originally Posted by rockc

Would you take $50 for the front and rear drive shafts shipped.
Thanks
Rock C

Man, thats a tough call. I was looking at another guys thread who was selling a set of these and he quoted a guy $40 for shipping alone (plus $100 for each shaft.) They are long and heavy. Shipping is gonna be high. $50 shipped doesn't come out to be a very good deal on my end. How about $60 shipped? I mean, I want them out of the way, but I gotta make something on them. Give me your thoughts... what do you think it will cost to ship them?

bondo510 · 06-19-2013, 07:39 AM

Is grill GMC or Chevy?
Posted via Mobile Device

**rockc** · 08-25-2013, 02:48 PM

Is the $60.oo still good?
Thanks
Rock C

altunaa · 11-09-2013, 06:29 PM

i am looking for the fuse block, can you post a picture/
thanks

JimH2828 · 11-10-2013, 10:42 AM

How's the condition of the double wall top glass? I would assume they are clear not tinted, right? Do they have soft-ray stamps? What about the rear hatch glass?

Thanks
Jim

**chewysask** · 11-10-2013, 12:30 PM

Do you have any pics of the single wall hatch hinges and the top hold down brackets.
Thanks Carey

03-20-2013, 05:58 AM	#1
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Leftover parts from a Blazer and my Suburban I had these listed on the truck side of the classifieds and noticed that most of the Blazer/ Suburban parts hadn't sold. I figured I'd see who in here was interested. I have some stuff I need to get out of the way. I prefer not to ship the larger items Hood for 69-72 - $100 Hood for 67-68 - $100 Grille for 67-68 - $80 Steering box off of 71 that I parted - $50 Front and rear driveshaft off of Blazer - $30/each. Door hinges off of Blazer (assume they are the same as truck?) - $25 Lift gate hinges off of single wall Blazer top - $30 Hinge cover plates off of single wall top (have 3 good, 4th is bent) $25 for all One Blazer single wall top hold down $15 Blazer single wall top windshield brackets -$25 Blazer Double wall top glass $50 each or both for $80 Blazer Double wall top $100 - (located in WV at my dads) Clips for mounting dome light/switch plug to fiberglass on Blazer tops - $5/each Blazer single wall top plug harness -SOLD - $30 Driver quality taillights $15 Driver quality backup lights $10 Tailgate hinges $20 -sold Suburban Barn Door sliding mechanisms - $30 Stainless windshield wipers (both sides)- $25 Rearview mirror - $10 Door striker plates - $20 - (think thats what they are called) Fuse block -$15 Let me know what you are looking at and I will get pics... Posted via Mobile Device __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP... Last edited by jeffg1010; 05-19-2013 at 09:41 AM.

03-20-2013, 07:30 AM	#2
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Leftover parts from a Blazer and my Suburban Interested in the single wall top plug harness and door striker shims if you could post some pics. Thanks

03-20-2013, 08:17 AM	#3
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,545	Re: Leftover parts from a Blazer and my Suburban Have you a rag joint with 3/4" shaft splines? Sorry if I've asked before just asking everyone on here. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

03-20-2013, 01:08 PM	#4
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Leftover parts from a Blazer and my Suburban Interested in the front driveshaft if available. Thanks! __________________ 1972 Chevrolet Blazer 4x4 (Almost done stay tuned) 1970 Chevrolet Pickup Longhorn CST/20 (SOLD)

03-20-2013, 02:51 PM	#5
JeffD72 Registered User Join Date: Feb 2011 Location: Birmingham, Alabama Posts: 220	Re: Leftover parts from a Blazer and my Suburban interested in pics of the rearview mirror and windshield wipers

03-20-2013, 03:14 PM	#6
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Re: Leftover parts from a Blazer and my Suburban Requested pics... Posted via Mobile Device __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

03-20-2013, 08:08 PM	#9
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Leftover parts from a Blazer and my Suburban I'll pass on the strikers. But I'd do $30 shipped on the dome light harness assembly. Thanks, David

03-22-2013, 08:18 PM	#11
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Re: Leftover parts from a Blazer and my Suburban TTT. I'd like to move this stuff. Any offers? Posted via Mobile Device __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

03-22-2013, 10:17 PM	#12
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Leftover parts from a Blazer and my Suburban Did you sold the front driveshaft? __________________ 1972 Chevrolet Blazer 4x4 (Almost done stay tuned) 1970 Chevrolet Pickup Longhorn CST/20 (SOLD)

03-29-2013, 07:53 PM	#13
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,920	Re: Leftover parts from a Blazer and my Suburban I'm interested in the top hold down brackets. Any pics? Do you have any other brackets or the chrome side pieces where it bolts to the bed? I need pretty much everything.

05-19-2013, 07:56 PM	#15
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 633	Re: Leftover parts from a Blazer and my Suburban Would you take $50 for the front and rear drive shafts shipped. Thanks Rock C __________________ 72 chevy 3/4 ton 4X4

05-19-2013, 08:41 PM	#16
mesracer Registered User Join Date: Feb 2011 Location: menlo, ga Posts: 10	Re: Leftover parts from a Blazer and my Suburban I'll take the hinge cover plates. PM me your Paypal info. Thanks, Posted via Mobile Device

06-19-2013, 07:39 AM	#18
bondo510 Registered User Join Date: Jun 2011 Location: Sonora CA Posts: 238	Re: Leftover parts from a Blazer and my Suburban Is grill GMC or Chevy? Posted via Mobile Device

08-25-2013, 02:48 PM	#19
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 633	Re: Leftover parts from a Blazer and my Suburban Is the $60.oo still good? Thanks Rock C __________________ 72 chevy 3/4 ton 4X4

11-09-2013, 06:29 PM	#20
altunaa Registered User Join Date: Jan 2006 Location: Uruguay Posts: 101	Re: Leftover parts from a Blazer and my Suburban i am looking for the fuse block, can you post a picture/ thanks



Register or Log In To remove these advertisements.

11-10-2013, 10:42 AM	#21
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Leftover parts from a Blazer and my Suburban How's the condition of the double wall top glass? I would assume they are clear not tinted, right? Do they have soft-ray stamps? What about the rear hatch glass? Thanks Jim

11-10-2013, 12:30 PM	#22
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: Leftover parts from a Blazer and my Suburban Do you have any pics of the single wall hatch hinges and the top hold down brackets. Thanks Carey

Register or Log In To remove these advertisements.