TH350 FREE! Come get it! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

imdarren · 12-30-2003, 11:58 PM

Come get this thing from under my work bench!
It was given to me, and was told it worked fine.
I think It is a late 70's model.
It has a long tail shaft.
I have a Converter to go with it.
You must come get it.
I live in south west Washington.
Please PM me if interested.

Darren

danho · 12-31-2003, 12:36 AM

Where at in SW Washington?
Going to be going to Tacoma in a few weeks might be able to swing by.
Dan.

imdarren · 12-31-2003, 01:52 AM

A little town 10 miles east of Vancouver called Washougal.
10 Mins east off I205.

Darren

danho · 01-06-2004, 03:26 PM

Sorry for the delay, I was out of town for a bit.
The Washington trip got canceled so I won't be able to pick it up.
Hope this didn't cause any problems for you.
Thanks, Dan.

imdarren · 01-06-2004, 05:33 PM

No problem at all

Don't worry about it

Darren

jhow66 · 01-07-2004, 12:03 AM

I believe I will pass on this one as I live in Knoxville, Tenn. and it would be cheaper to buy a new one.

LeRoy · 01-07-2004, 01:07 AM

I could use it if I was a little closer. Could it come to one of our club meets? lol

Brad · 01-07-2004, 01:41 AM

I could pick it up after the snow clears if its still available.

imdarren · 01-07-2004, 03:44 AM

Brad,
It will be here.
I am needing to get rid of it soon. Space is valuble around here.
Come look at it and see if you want it. When you get a chance.
Just PM me or e-mail me at darrengale67@hotmail.com and I'll send you directions.

Darren

**PICKMUP** · 01-07-2004, 04:53 AM

I would buy it, but that is just too high for me! Have you got one cheaper?

hotrodworld · 01-09-2004, 12:33 PM

It seems these days that everyone is switching to 700 R4s. I would like to come and get your free 350 or 400 trannys that are kicking around in the North Carolina area les ay from Raleigh to Winston salem Truthfully,, I would use them for early Chevy powered Hot Rods !!! I hope I dont come across sarcastic,,Im not !!! but after seeing this post,, maybe there are others that need space in their shops or garages... Thank you kindly,,, Sean sean@hotrodworld.net

12-30-2003, 11:58 PM	#1
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	TH350 FREE! Come get it! Come get this thing from under my work bench! It was given to me, and was told it worked fine. I think It is a late 70's model. It has a long tail shaft. I have a Converter to go with it. You must come get it. I live in south west Washington. Please PM me if interested. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super Last edited by imdarren; 12-31-2003 at 12:00 AM.

12-31-2003, 01:52 AM	#3
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	A little town 10 miles east of Vancouver called Washougal. 10 Mins east off I205. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

01-06-2004, 05:33 PM	#5
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	No problem at all Don't worry about it Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

01-07-2004, 12:03 AM	#6
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Free trans I believe I will pass on this one as I live in Knoxville, Tenn. and it would be cheaper to buy a new one. __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

01-07-2004, 01:07 AM	#7
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	I could use it if I was a little closer. Could it come to one of our club meets? lol __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

12-31-2003, 12:36 AM	#2
danho Pesemistic Optimist Join Date: Dec 2002 Location: Prineville, Oregon Posts: 227	Where at in SW Washington? Going to be going to Tacoma in a few weeks might be able to swing by. Dan.

01-06-2004, 03:26 PM	#4
danho Pesemistic Optimist Join Date: Dec 2002 Location: Prineville, Oregon Posts: 227	Sorry for the delay, I was out of town for a bit. The Washington trip got canceled so I won't be able to pick it up. Hope this didn't cause any problems for you. Thanks, Dan.

01-07-2004, 01:41 AM	#8
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	I could pick it up after the snow clears if its still available. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

01-07-2004, 03:44 AM	#9
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	Brad, It will be here. I am needing to get rid of it soon. Space is valuble around here. Come look at it and see if you want it. When you get a chance. Just PM me or e-mail me at darrengale67@hotmail.com and I'll send you directions. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

01-07-2004, 04:53 AM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	I would buy it, but that is just too high for me! Have you got one cheaper? __________________ Email: frankeham@comcast.net Phone: 360-956-7170

01-09-2004, 12:33 PM	#11
hotrodworld Registered User Join Date: Oct 2003 Location: Trinity North Carolina Posts: 5	Any Turbo 350s or 400s (Free) in northern N.C. ?? It seems these days that everyone is switching to 700 R4s. I would like to come and get your free 350 or 400 trannys that are kicking around in the North Carolina area les ay from Raleigh to Winston salem Truthfully,, I would use them for early Chevy powered Hot Rods !!! I hope I dont come across sarcastic,,Im not !!! but after seeing this post,, maybe there are others that need space in their shops or garages... Thank you kindly,,, Sean sean@hotrodworld.net __________________ hotrodworld.net



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.