|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-06-2020, 12:33 PM
|
#1 |
|
Registered User
Join Date: Aug 2020
Location: Clyde Texas
Posts: 2
|
71 chevy custom intermediate steering shaft
I'm looking for images from any one who has done a 3 piece intermediate steering shaft with a heim bearing support. I have installed a total cost involved front suspension with rack and pinion steering so my I shaft has to go to the inside of the frame. The angle is too great for a single shaft and the frame is in the way. I have seen people do a 3 piece shaft but can not find any information or even images online. Any help and also images would be greatly appreciated.
|
|
|
|
12-06-2020, 04:22 PM
|
#2 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: 71 chevy custom intermediate steering shaft
Something like this maybe?
This is what I type in to google. 'installing steering dd in hot rods' It pulled up a bunch of pictures. Use the google image    
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
12-06-2020, 05:18 PM
|
#3 |
|
Registered User
Join Date: Aug 2020
Location: Clyde Texas
Posts: 2
|
Re: 71 chevy custom intermediate steering shaft
Yes like that, but on a c10 would be great because the steering column comes thru the firewall on the outboard side of the frame. So it would be interesting to see itdone on a c10.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
