The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-24-2014, 10:05 PM   #1
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Volt Gauge Conversion Kits

Hello all,

I am now offering a volt gauge conversion kit for all of you who may be interested in one.

The kit will come with a volt gauge (76 + Chevy truck) The rear small tin (glass beaded and painted) and the 3 pieces of wiring which will be come with #6 eyelets soldered to 14 gauge wire and shrink tube. I will also include the additional nuts required for installation. The temp gauge is not included and must be swapped from your original cluster set up. I can provide temp gauges for an additional charge if needed.


Options are the use of the factory amp gauge face and needle or the 76 + gauge face that has 8,13 and 18 volts. The 76 + volt gauge face does need some extensive modification to fit and look right in the cluster.

I have attached photos to show the differences in the faces.

Please ask questions. I will provide a link with instructions for those who request them.

I am asking $150.00 shipped within the CONUS.

Thank you for looking, I hope all of you have a great Christmas.

Take care,
Tom
Attached Images
     
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C

Last edited by TBONE1964; 11-27-2020 at 10:18 PM.
TBONE1964 is offline   Reply With Quote
Old 12-24-2014, 10:16 PM   #2
BLT gmc
Registered User
 
Join Date: Feb 2014
Location: West Iowa
Posts: 1,109
Re: Volt Gauge Conversion Kits

Tom,
Merry Christmas! For my understanding, the temp gauge that is original to our trucks must be changed for a newer temp gauge?
Thank you for offering a kit like this,
Bruce
BLT gmc is offline   Reply With Quote
Old 12-24-2014, 10:21 PM   #3
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by BLT gmc View Post
Tom,
Merry Christmas! For my understanding, the temp gauge that is original to our trucks must be changed for a newer temp gauge?
Thank you for offering a kit like this,
Bruce
This confused me at first also. If I understand it correctly, you can use your current temp gauge, and just swap it over to the tin that comes in this kit. Is this correct?
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 12-24-2014, 10:26 PM   #4
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Yes, you can use your original temp gauge. Other than sharing the same tin work it is completely separate from the amp/volt gauge.
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 12-24-2014, 10:23 PM   #5
Kennuck
Registered User
 
Kennuck's Avatar
 
Join Date: Oct 2013
Location: Dresden, Ontario
Posts: 647
Re: Volt Gauge Conversion Kits

Looks good Tom, thanks for doing this.
__________________
1970 Short Wide
5.3 4L60E BlackBear tune
3:73 gears, Boyd's Tank
2.5 / 4 drop 5 lug disc brakes
Vintage Air
18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear
Kennuck is offline   Reply With Quote
Old 12-24-2014, 10:28 PM   #6
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: Volt Gauge Conversion Kits

TBONE If you use the original face and needle, do you just swap them on to the 76 gauge? Does this require any modification?
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 12-24-2014, 10:35 PM   #7
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by jmking9 View Post
TBONE If you use the original face and needle, do you just swap them on to the 76 gauge? Does this require any modification?
Not so much but the trick is getting the needle positioned. You have to apply voltage to the gauge and you have to know what that voltage is. My kits will set the needle at 13 volts when it is in the middle of the face. In a normal condition, you will probably see the needle a little to the right of center as the system will typically be at 14.5 volts give or take .5 volts
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C

Last edited by TBONE1964; 12-28-2014 at 11:10 PM.
TBONE1964 is offline   Reply With Quote
Old 12-24-2014, 10:50 PM   #8
Wizo
Registered User
 
Wizo's Avatar
 
Join Date: Dec 2012
Location: Tacoma WA
Posts: 274
Re: Volt Gauge Conversion Kits

i just sent you a private message. tks
__________________
1970 3/4 ton long box GMC
!968 C10 short stepside (Papa's Old Lorry)
2006 2500 HD Silverado Duramax/Alison
Wizo is offline   Reply With Quote
Old 12-24-2014, 11:10 PM   #9
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by Wizo View Post
i just sent you a private message. tks
No PM from you yet. I will stay tuned.

Thank you,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 12-24-2014, 10:34 PM   #10
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 19,972
Re: Volt Gauge Conversion Kits

So the ammeter circuits on the board are taped back and not used? If that is the case, you could run a volt meter instead of an ammeter when switching from a non gauge cluster to a gauge cluster, and not have to cut into your harness or modify it, or add fuses as described by gmcpauls instructions...is this correct?
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
leddzepp is offline   Reply With Quote
Old 12-24-2014, 10:47 PM   #11
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by leddzepp View Post
So the ammeter circuits on the board are taped back and not used? If that is the case, you could run a volt meter instead of an ammeter when switching from a non gauge cluster to a gauge cluster, and not have to cut into your harness or modify it, or add fuses as described by gmcpauls instructions...is this correct?
Hi Scott,

Yes and no. First think of the amp gauge as a completely separate function than the other gauges. You have 2 wires in the cluster connector that power the amp gauge. One in the #1 terminal and one in the #12 terminal. These need to be added to the harness for a non gauge harness to work with a gauge cluster. I have always suggested that a person run the wiring just like factory with the 4 amp fuses in line as well.

The rest of the gauges (fuel and temp) need to be wired as shown in GMC Pauls directions. Most of the wiring is there, it just needs to be changed by removing the terminals from the connector and placing them in the correct location for a gauge cluster.

For those who are converting from a non gauge to a gauge cluster, adding a volt gauge is much easier than wiring for an amp gauge.

As far as circuit board, as long as the "amp" gauge wiring is not live (under power) it does not matter how you do it. It can be as simple as removing the two 4 amp in line fuses, taping the circuit board back (as in my photos) or actually removing the #1 and #12 terminals from the cluster connector and taping them off.

Hope this helps and thank you for the questions.

Have a Merry Christmas,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 12-24-2014, 11:01 PM   #12
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 19,972
Re: Volt Gauge Conversion Kits

[QUOTE=TBONE1964;6970666]Hi Scott,

Yes and no. First think of the amp gauge as a completely separate function than the other gauges. You have 2 wires in the cluster connector that power the amp gauge. One in the #1 terminal and one in the #12 terminal. These need to be added to the harness for a non gauge harness to work with a gauge cluster. I have always suggested that a person run the wiring just like factory with the 4 amp fuses in line as well.

Exactly...since the ammeter is independent, Do you still need to do this step if you run a volt meter instead?

The rest of the process is just a matter of switching pins around in the plug it looks like.

Thanks for your info and Merry Christmas as well!
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
leddzepp is offline   Reply With Quote
Old 12-24-2014, 11:09 PM   #13
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

[quote=leddzepp;6970692]
Quote:
Originally Posted by TBONE1964 View Post
Hi Scott,

Yes and no. First think of the amp gauge as a completely separate function than the other gauges. You have 2 wires in the cluster connector that power the amp gauge. One in the #1 terminal and one in the #12 terminal. These need to be added to the harness for a non gauge harness to work with a gauge cluster. I have always suggested that a person run the wiring just like factory with the 4 amp fuses in line as well.

Exactly...since the ammeter is independent, Do you still need to do this step if you run a volt meter instead?

The rest of the process is just a matter of switching pins around in the plug it looks like.

Thanks for your info and Merry Christmas as well!
No sir,

The volt gauge only needs a power and ground to work. That power and ground can come from anywhere but it is easiest to get right next door at the temp gauge as shown in my photo.

I suggest those who have a existing amp gauge, remove power from the circuit board by what ever method they see best in there situation.
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 01-02-2015, 06:53 PM   #14
magwakeenercew2jh
RAT1968 '68 Cab/'71 Parts
 
magwakeenercew2jh's Avatar
 
Join Date: Feb 2002
Location: Coarsegold, CA
Posts: 2,375
Re: Volt Gauge Conversion Kits

[quote=TBONE1964;6970704]
Quote:
Originally Posted by leddzepp View Post
The volt gauge only needs a power and ground to work. That power and ground can come from anywhere but it is easiest to get right next door at the temp gauge as shown in my photo.

I suggest those who have a existing amp gauge, remove power from the circuit board by what ever method they see best in there situation.

Great kit, Tom. Mine came today. Thanks.

I read the above, and understand that a 12v and G (1 and 2) run the Volt meter.

Stealing the 12V from the temp gauge with the red #1 from what terminal on the temp gauge?
I'd guess the one at the 3 o'clock position as the picture faces us. But guessing is not smart. Hahahaha!

Also, where do you recommend attaching the other end of the ground wire (black; #2)?

Finally, what is the purpose of the short black wire with the #3 and #4 eyelets?
And, what connection points do you suggest?
Attached Images
 
__________________
M17
Coarsegold, CA
RAT's shiny now.
But always a rat.
magwakeenercew2jh is offline   Reply With Quote
Old 12-24-2014, 11:41 PM   #15
57taskforce
All about them K’s
 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: Farmington, New Mexico
Posts: 6,170
Re: Volt Gauge Conversion Kits

Very nice when I get to this point in my build I will be in touch!
__________________
Tyler
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘87 IROC-Z all original 50K mile survivor TPI 305 IROC Blue
‘10 Camaro 2SS/RS Aqua Blue Metallic #93 -version 2.0
57taskforce is offline   Reply With Quote
Old 12-25-2014, 12:29 AM   #16
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by 57taskforce View Post
Very nice when I get to this point in my build I will be in touch!
Thank you. I will look forward to it
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 12-25-2014, 12:22 AM   #17
smbrouss70
Registered User
 
smbrouss70's Avatar
 
Join Date: Sep 2003
Location: Rayne, LA
Posts: 2,782
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by TBONE1964 View Post
The 76 + volt gauge face does need some extensive modification to fit and look right in the cluster.
Is this extensive modification already done in your kits or are there instructions to show what needs to be done?
__________________
Steven

"If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers
R.I.P. Oscar

R.I.P. Ratchet

1967 Pontiac GTO - Dad was the Original Owner
1970 Chevy 2wd SWB "Oscar's Truck"
1970 Chevy 2wd Blazer "Ratchet's Blazer"
2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar"
2017 Chevy Suburban "BDB"
2020 Chevy Blazer Premier "Foxy"

Member of Louisiana Classic Truck Club (LCTC)

Shop Build
smbrouss70 is offline   Reply With Quote
Old 12-25-2014, 12:28 AM   #18
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by smbrouss70 View Post
Is this extensive modification already done in your kits or are there instructions to show what needs to be done?
Yes sir, I do all of the modification to the face prior to shipping. The kit will be ready to install.

Take care and Merry Christmas,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 12-25-2014, 12:33 AM   #19
zicc1835
Senior Member
 
zicc1835's Avatar
 
Join Date: Mar 2011
Location: Hanover NJ
Posts: 4,074
Re: Volt Gauge Conversion Kits

Tom,
I will take one
Merry Xmas
Jess




Quote:
Originally Posted by TBONE1964 View Post
Hello all,

I am now offering a volt gauge conversion kit for all of you who may be interested in one.

The kit will come with a volt gauge (76 + Chevy truck) The rear small tin (glass beaded and painted) and the 3 pieces of wiring which will be come with #6 eyelets soldered to 14 gauge wire and shrink tube. I will also include the additional nuts required for installation. The temp gauge is not included and must be swapped from your original cluster set up. I can provide temp gauges for an additional charge if needed.


Options are the use of the factory amp gauge face and needle or the 76 + gauge face that has 8,13 and 18 volts. The 76 + volt gauge face does need some extensive modification to fit and look right in the cluster.

I have attached photos to show the differences in the faces.

Please ask questions. I will provide a link with instructions for those who request them.

I am asking $65.00 for these kits shipped within the CONUS.

Thank you for looking, I hope all f you have a great Christmas.

Take care,
Tom
zicc1835 is online now   Reply With Quote
Old 12-25-2014, 12:38 AM   #20
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by zicc1835 View Post
Tom,
I will take one
Merry Xmas
Jess
Hi Jess, I will get one ready for you and let you know. It should be ready before the end of weekend.

Do you want the factory amp gauge face or the 76 + face?

I will PM you when everything is ready.

Thank you very much and Merry Christmas too you,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 12-25-2014, 12:44 AM   #21
zicc1835
Senior Member
 
zicc1835's Avatar
 
Join Date: Mar 2011
Location: Hanover NJ
Posts: 4,074
Re: Volt Gauge Conversion Kits

id like to to have the 76+ look kind of like that maybe the next one will keep stock lookin

Quote:
Originally Posted by TBONE1964 View Post
Hi Jess, I will get one ready for you and let you know. It should be ready before the end of weekend.

Do you want the factory amp gauge face or the 76 + face?

I will PM you when everything is ready.

Thank you very much and Merry Christmas too you,
Tom
zicc1835 is online now   Reply With Quote
Old 12-26-2014, 05:52 PM   #22
zicc1835
Senior Member
 
zicc1835's Avatar
 
Join Date: Mar 2011
Location: Hanover NJ
Posts: 4,074
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by zicc1835 View Post
id like to to have the 76+ look kind of like that maybe the next one will keep stock lookin
M O mailed today and a bump for you!
zicc1835 is online now   Reply With Quote
Old 12-26-2014, 10:03 PM   #23
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by zicc1835 View Post
M O mailed today and a bump for you!
Thank you sir for the bump and the business.

Have a good weekend. I will look for your MO and let you know when I have your kit ready to ship.

Take care,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 09-12-2015, 07:19 PM   #24
zicc1835
Senior Member
 
zicc1835's Avatar
 
Join Date: Mar 2011
Location: Hanover NJ
Posts: 4,074
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by zicc1835 View Post
Tom,
I will take one
Merry Xmas
Jess
Tom
ill take another if you have any left ....and thanks for sharing your knowledge with me in the past..sorry to see you shutting down , but i get it.....
thanks
Jess
zicc1835 is online now   Reply With Quote
Old 09-12-2015, 08:07 PM   #25
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by zicc1835 View Post
Tom
ill take another if you have any left ....and thanks for sharing your knowledge with me in the past..sorry to see you shutting down , but i get it.....
thanks
Jess
Hi Jess,

I will see if I can find another good volt gauge and set you up. No promises

I just used the last good volt gauge I had. I wish I could keep this going but we cannot pay the rent with the work I have coming in now. You and everyone else that has been a customer have been great.

I will let you know soon if I can get another one built up for you.

Take care,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com