The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-22-2009, 09:46 PM   #1
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Talking Bagged 05 Suburban

I purchased this burb in Feb due to my expanding family (3rd boy is due in August). A Tahoe or Yukon was my first choice but decided they didn’t offer enough room for our needs: 3 kids, 2 adults, wheelchair (I’m paraplegic), 90lb Rottie, luggage/cargo/misc, so I settled on a Suburban.

The decision to install air ride was out of necessity more than anything, though I do like the looks of just about anything on the ground. I need the vehicle low in order to transfer in and out but also want a nice, comfortable ride so I opted for Air Ride Technologies CoolRide for the rear, ShockWaves for the front, and LevelPro BIG RED MAX for air management.

I work slow and thorough (this is my first air ride install) so my goal is to have the four corners bagged by the end of the 3 day weekend; today I took off work to get started on the install. I didn't make as much progress as I expected but progress non the less.

I managed to get it on jack stands, remove the torsion bars, front shocks, trimmed the corner of the bump stop bracket and completely removed the bump stop cup from the drivers front. Wrapped the day up with installing the drivers front ShockWave.


Here's how it looked when purchased. It's a VERY clean 05 - 29,000 miles, only 1 previous owner, leather, front buckets, bose audio, etc..


How I left things today...






More progress tomorrow!
LooseCannon is offline   Reply With Quote
Old 05-22-2009, 10:26 PM   #2
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: Bagged 05 Suburban

That's going to look great! Looks like it's brand new still!
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote
Old 05-24-2009, 09:03 PM   #3
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

Finished installing the passengers side ShockWave today. Like with the drivers side I removed the bump stop cup, trimmed the corner of the bracket, shortened the sway bar end links 2 1/4" and drilled out the end link nut to accommodate a 3/8 bolt. From GM the bolt/nut is 9mm and the ShockWaves came with a replacement (shorter for the shortened end links) but it was the wrong size. I didn't have any 9mm hardware laying around but did have a few 7" 3/8 bolts and nylock nuts that worked perfectly.

Here are a couple pics...

Before removing the bump stop and trimming the corner


After


Shortening the end links and drilling the end link nut/cap




ShockWave installed

Last edited by LooseCannon; 03-21-2011 at 09:26 PM.
LooseCannon is offline   Reply With Quote
Old 05-25-2009, 10:47 AM   #4
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

I threw a wheel on the burb to get a measurement of the amount of drop and have to say I'm very disappointed. According to the tape measure the ShockWaves only gave me 4" of total drop and I was expecting 6" and 3" at ride height.

The before and after measurement are not exactly apples to apples though because the before was with the truck sitting on the ground. I expect the tire to compress some with the weight of the truck but not 2".






Nothing is interfering or binding up




Tie rod and sway bar are close (about 1/4") but they're not touching


Looks like I might have to run drop spindles to get enough drop. Which is a big bummer because they require a 17" or larger wheel and mine are 16". More $$$$!
LooseCannon is offline   Reply With Quote
Old 05-25-2009, 03:39 PM   #5
xxcov3rxx
Registered User
 
xxcov3rxx's Avatar
 
Join Date: May 2009
Location: Lechlade, UK
Posts: 12
Thumbs up Re: Bagged 05 Suburban

hey man... i want you to know i registered just to give you some props! lhttp://67-72chevytrucks.com/vboard/images/smilies/metal.gif looks good so far. i have thought about doing this for a long time and have been looking through forums to see this, but you don't see too many burbs. With 2" McGaughy's drop spindles i think that will put you right where your looking to get.

on another note, are you looking to throw some big rims on and still get in the weeds... or is this more for convenience? if i do bag my burb, i would like to at least bottom out on my inner fenders...

keep it up and ill keep watch! and keep up with pictures!
xxcov3rxx is offline   Reply With Quote
Old 05-25-2009, 04:39 PM   #6
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

Quote:
Originally Posted by 67ChevyRedneck View Post
That's going to look great! Looks like it's brand new still!
Quote:
Originally Posted by xxcov3rxx View Post
hey man... i want you to know i registered just to give you some props! lhttp://67-72chevytrucks.com/vboard/images/smilies/metal.gif looks good so far. i have thought about doing this for a long time and have been looking through forums to see this, but you don't see too many burbs. With 2" McGaughy's drop spindles i think that will put you right where your looking to get.

on another note, are you looking to throw some big rims on and still get in the weeds... or is this more for convenience? if i do bag my burb, i would like to at least bottom out on my inner fenders...

keep it up and ill keep watch! and keep up with pictures!
Thanks guys!!!

I'm still undecided on the wheels. Initially, I was planning to run the 16's but looks like I might be shopping for 17"+ wheels (if drop spindles are needed).

Last edited by LooseCannon; 05-25-2009 at 04:40 PM.
LooseCannon is offline   Reply With Quote
Old 05-26-2009, 11:17 AM   #7
xxcov3rxx
Registered User
 
xxcov3rxx's Avatar
 
Join Date: May 2009
Location: Lechlade, UK
Posts: 12
Re: Bagged 05 Suburban

obviously this is for convenience... i should have read a little closer...

how much of a drop are you expecting to gain in the back?
__________________
Michael
2002 Blazer 6.0 swap in action
xxcov3rxx is offline   Reply With Quote
Old 05-26-2009, 09:53 PM   #8
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

Quote:
Originally Posted by xxcov3rxx View Post
obviously this is for convenience... i should have read a little closer...

how much of a drop are you expecting to gain in the back?
I am hoping for 7 - 8".
LooseCannon is offline   Reply With Quote
Old 05-28-2009, 01:10 AM   #9
xxcov3rxx
Registered User
 
xxcov3rxx's Avatar
 
Join Date: May 2009
Location: Lechlade, UK
Posts: 12
Re: Bagged 05 Suburban

so.. whats up with the progress? where is the pics... why isn't there pictures with this thing laying out yet?
__________________
Michael
2002 Blazer 6.0 swap in action
xxcov3rxx is offline   Reply With Quote
Old 05-28-2009, 07:50 PM   #10
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

Quote:
Originally Posted by xxcov3rxx View Post
so.. whats up with the progress? where is the pics... why isn't there pictures with this thing laying out yet?
Probably not until next week. The supplied air line fittings for the ShockWaves are the wrong size and none were supplied for the rear bags. The rear springs and shocks are removed but can't install the bags until I get the fittings.

I might start mounting the tanks and compressors while waiting...

Last edited by LooseCannon; 05-28-2009 at 07:50 PM.
LooseCannon is offline   Reply With Quote
Old 05-28-2009, 08:57 PM   #11
truckdude239
Senior Member
 
truckdude239's Avatar
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,216
Re: Bagged 05 Suburban

you might want to load that side up i have feeling once you put weight on that side the sway bar and toe rod will be touching
__________________
David fuller
Ase Certified Mechanic
Click here to help support our board!!


1971 Chevy c-10 under going a 4.8l LSx swap

Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305

2007 Honda Accord my daily 145kmiles
2002 Honda Accord 4 door With 330k(sisters car)
2005 toyota Avalon 228k( brothers car)
2002 Sububran 5.3 245k
2000 Tahoe 5.3l 378

General manager for Marco's Carwash & lube
truckdude239 is offline   Reply With Quote
Old 05-28-2009, 09:28 PM   #12
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

Quote:
Originally Posted by truckdude239 View Post
you might want to load that side up i have feeling once you put weight on that side the sway bar and toe rod will be touching
I'll be sure to recheck the sway bar to tie rod clearance once the burb is sitting on all fours. Obviously the clearance is plentiful when aired up so as long as nothing is touching when aired out it'll be fine.
LooseCannon is offline   Reply With Quote
Old 05-29-2009, 01:55 PM   #13
xxcov3rxx
Registered User
 
xxcov3rxx's Avatar
 
Join Date: May 2009
Location: Lechlade, UK
Posts: 12
Re: Bagged 05 Suburban

how much clearance will that give you between the rear axle and the exhaust?
__________________
Michael
2002 Blazer 6.0 swap in action
xxcov3rxx is offline   Reply With Quote
Old 05-29-2009, 02:42 PM   #14
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

Quote:
Originally Posted by xxcov3rxx View Post
how much clearance will that give you between the rear axle and the exhaust?
Good question; I haven't looked yet. I can always dumb it before the rear end
LooseCannon is offline   Reply With Quote
Old 05-29-2009, 02:56 PM   #15
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

Looks like I might be OK with fittings after all. The LevelPro kit came with 12 1/2" line x 1/2" NPTF fittings: 6 for the air valve block, 4 for the tanks, and 2 for the compressors. Over lunch today I cracked open one of the compressor boxes and it already has a line with fittings to connect to the tank so this will free up 4 fittings to use for the bags (if the thread size is correct).

Last edited by LooseCannon; 05-29-2009 at 02:57 PM.
LooseCannon is offline   Reply With Quote
Old 05-29-2009, 04:07 PM   #16
xxcov3rxx
Registered User
 
xxcov3rxx's Avatar
 
Join Date: May 2009
Location: Lechlade, UK
Posts: 12
Re: Bagged 05 Suburban

sounds great! looking forward to some pictures...
__________________
Michael
2002 Blazer 6.0 swap in action
xxcov3rxx is offline   Reply With Quote
Old 05-31-2009, 09:46 PM   #17
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

Installed the bags in the rear and finally sat the burb on the ground! It looks awesome... the pics don't do it justice.

Total drop in front is 4 1/2" and 6" in the rear. I was able to transfer in/out OK but getting the chair in/out was tough so I'll order drop spindles to lower the front another 2". Removing the bump stop brackets (bump stops are already in the trash) will get me another 2" approximately in the rear. I might also remove the running boards to get the chair a couple of inches closer to the seat...

Bags assembled and ready for install.


After installing the passenger bag I noticed the top of the mounting stud was hitting the floor so I pulled it and removed 2" from the stud


Off the jack stands











Still have a lot of work to complete : mount the tanks, compressors, valves, run the lines, shorten the rear sway bar end links, install, drop spindles, etc...

Last edited by LooseCannon; 05-31-2009 at 09:47 PM.
LooseCannon is offline   Reply With Quote
Old 06-01-2009, 12:12 PM   #18
xxcov3rxx
Registered User
 
xxcov3rxx's Avatar
 
Join Date: May 2009
Location: Lechlade, UK
Posts: 12
Re: Bagged 05 Suburban

that looks killer! nice... cant wait to see the install with the compressors... keep the pics comin! with drop spindles and those rear bumpstops removed it should help out a lot.
__________________
Michael
2002 Blazer 6.0 swap in action
xxcov3rxx is offline   Reply With Quote
Old 06-07-2009, 11:17 AM   #19
little nick D
Registered User
 
Join Date: May 2009
Location: dfw texas
Posts: 52
Re: Bagged 05 Suburban

hey man the work is coming along for sure but something to think about is those front mounts mite need some exrta support. those upper mounts have been known to bend over time, an being a burb its allot more weight so ya i am just trying to help man....again keep up the good work.
little nick D is offline   Reply With Quote
Old 06-07-2009, 03:36 PM   #20
jb1016
"Oh well, it's a driver."
 
jb1016's Avatar
 
Join Date: Jul 2008
Location: Nashville, TN
Posts: 3,467
Re: Bagged 05 Suburban

Big props, LooseCannon...it's awesome to see that your "disability" doesn't stop you from doing what you want to do. It's already looking tough, and it sounds like it's probably still brand new inside. Are you gonna put hand controls on it?

And my $.02 as far as wheels: I think the 20" LTZ rims look great on these trucks, especially with that color paint.
Name:  ltz (WinCE).jpg
Views: 7573
Size:  7.7 KB
__________________
- JB - '93 C1500 SHORT/FLEET SILVERADO, 350/4L60E

Quote:
Originally Posted by Tom Petty
I don't know, but I've been told: You never slow down, you never grow old.
jb1016 is offline   Reply With Quote
Old 06-07-2009, 03:44 PM   #21
72BlckButy
Tot Roddin'
 
72BlckButy's Avatar
 
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
Re: Bagged 05 Suburban

with JB, I think those "stock" wheels would look killer on the Burb.

What a great build!
__________________
-Nate

1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6)
1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior)
2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)
72BlckButy is offline   Reply With Quote
Old 06-07-2009, 08:52 PM   #22
tvblazer78
Low & Fast!
 
tvblazer78's Avatar
 
Join Date: Jan 2007
Location: Knoxville, TN
Posts: 3,110
Re: Bagged 05 Suburban

OO slap!! That is looking sweet! Please let us know how it rides..
tvblazer78 is offline   Reply With Quote
Old 06-07-2009, 11:12 PM   #23
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

Quote:
Originally Posted by xxcov3rxx View Post
that looks killer! nice... cant wait to see the install with the compressors... keep the pics comin! with drop spindles and those rear bumpstops removed it should help out a lot.
Thanks!

Quote:
Originally Posted by little nick D View Post
hey man the work is coming along for sure but something to think about is those front mounts mite need some exrta support. those upper mounts have been known to bend over time, an being a burb its allot more weight so ya i am just trying to help man....again keep up the good work.
Thanks for the heads up on the Shockwave mounts. I'll be sure to keep an eye on them.


Quote:
Originally Posted by jb1016 View Post
Big props, LooseCannon...it's awesome to see that your "disability" doesn't stop you from doing what you want to do. It's already looking tough, and it sounds like it's probably still brand new inside. Are you gonna put hand controls on it?

And my $.02 as far as wheels: I think the 20" LTZ rims look great on these trucks, especially with that color paint.
Thanks! The entire truck is unbelievably clean. Well worth the 600 mile round trip for the purchase. Currently, it has portable hand controls that will be replaced with permanent ones at some point.
I agree those wheels would look killer! My only concern about 20's are rubbing. I like a sidewall on my wheels and think anything shorter than a 45 profile won't look right and I don't know if a 45 will fit? I will run either a 18 or 20... just not sure which.


Quote:
Originally Posted by 72BlckButy View Post
with JB, I think those "stock" wheels would look killer on the Burb.

What a great build!
Thanks! And I love your truck!


Quote:
Originally Posted by tvblazer78 View Post
OO slap!! That is looking sweet! Please let us know how it rides..
Thanks! You have a sweet Blazer!

Last edited by LooseCannon; 06-07-2009 at 11:12 PM.
LooseCannon is offline   Reply With Quote
Old 07-28-2009, 09:51 AM   #24
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

Finally got the drop spindles on and new rubber on the wheels (2009 Suburban take-offs)

Off with the old


and on with the new



Now the whale sits at a 6.5/7.5 drop when fully deflated with 265/60/18. The fender to floor measures 29" in the front and 30" in the rear. Ride height should be approximately 2" higher.








I don't know if you can tell from the last pic but now the rearend is pushed over to the passenger side by 1/2". Does anyone know who sells an adjustable panhard bar for an 99 - 06 fullsize? I could go with a Watts link but don't want to spend the coin...
LooseCannon is offline   Reply With Quote
Old 07-28-2009, 10:01 AM   #25
LooseCannon
Registered User
 
Join Date: Mar 2004
Location: Boiling Springs, PA
Posts: 391
Re: Bagged 05 Suburban

I forgot to mention that the bags for the rear were too big (8" diameter) and rubbed the spring pocket.




I contacted Tony @ ART and after some discussion he sent me the 2500's (6.5" diameter) and they fit perfectly!

I gotta give props to ART and especially Tony. Not only do they make awesome products but their customer service is top notch!
LooseCannon is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com