How to place a bowtie - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trailzen · 04-12-2006, 05:56 PM

OK the hood emblem arrived for my 70 blazer today,does anyone have info on were to drill the holes ,which end up ,etc THe hood its going on is the goodmark cowl hood so it never had a bowtie

makovai · 04-12-2006, 06:01 PM

Quote:

Originally Posted by trailzen

OK the hood emblem arrived for my 70 blazer today,does anyone have info on were to drill the holes ,which end up ,etc THe hood its going on is the goodmark cowl hood so it never had a bowtie

I want a cowl hood so bad, if you dont post pics after you install it the blazer police will arrest you........I wanna see....I wanna see

trailzen · 04-12-2006, 06:06 PM

here it is pre bowtie ...bumper changed to factory chrome already so try and ignore the ugly

Trifelynn · 04-12-2006, 10:23 PM

:hit:

makovai · 04-13-2006, 12:51 AM

that is so killer

trailzen · 04-13-2006, 08:18 AM

Thanks guys .....but the question remains...

bouncytruck · 04-13-2006, 11:17 AM

I think the factory assembly manual has specs. Another way is to take a piece of paper & a pencil to a junkyard and do a "rubbing" of the front of a hood from a '69 or '70. Just pop off the emblem and run the pencil over the top. Make sure you get a marker like the center of the hood.

trailzen · 04-13-2006, 03:41 PM

Bouncy truck I love the rubbing idea unfortunately here in Canada an old truck at a wrecking yard is 1995 and if I asked to see a 70 they would probably laugh at me while jabbing me with pointed sticks

**FRENCHBLUE72** · 04-13-2006, 07:23 PM

I can take pics of my 69 hood with the tape measure if you still need it...

trailzen · 04-13-2006, 10:02 PM

please do that frenchblue it would help alot

bouncytruck · 04-13-2006, 11:03 PM

Do you have a factory assembly manual? It shows dimensions for the holes. I'll try to explain if I can.

Looking at the hood - The hole on the left is 1.56" left of center and 1.84" from the bottom edge of the hood. The right hole is 1.56" right of center, putting the holes 3.12" apart. The right hole is 3.22" above the bottom edge of the hood and 1.38" above the first hole. I belive it says the holes are 1/64 dia., but it also has some other numbers there that I don't understand.

Narrow edge of the emblem goes down.

trailzen · 04-13-2006, 11:13 PM

Thanks bouncy that'll work

**FRENCHBLUE72** · 04-13-2006, 11:25 PM

Hey bouncy any idea what page thats on????????haa yaa right.... If ya need anymore help just let us know..

BobbyK · 04-14-2006, 04:35 AM

Here you go,straight from the assembly manual.(jeez I hate that thing)

Not sure but I think the reproduction Bowtie's have off-set studs.
Looks like the factory Bowtie's studs are straight across.

At any rate...here's what the factory manual shows

BobbyK · 04-14-2006, 04:49 AM

Those demensions that Bouncy quoted are for the GMC badges.

LUV2XCLR8 · 04-14-2006, 06:37 AM

I responded to this once already, sweet rig btw

but I am curious about
the desire to have the bowtie on the hood, vehicle is obviously not stock?

trailzen · 04-14-2006, 09:53 AM

I just love the bowtie ,it kind of finishes the truck off ,right now when I look at it something is missing

bouncytruck · 04-14-2006, 11:17 AM

Ah, I did put the GMC measurements. Thanks for the catch!

The repop bow tie I put on my '69 (picks of the emblem in this thread- http://67-72chevytrucks.com/vboard/s...d.php?t=195577) had off-set studs and fit into the factory holes. I got it from The Truck Shop. I put a good coat of wax on it (front & back) before installing to help keep it nice looking.

LUV2XCLR8 · 04-14-2006, 06:28 PM

Quote:

Originally Posted by trailzen

I just love the bowtie ,it kind of finishes the truck off ,right now when I look at it something is missing

Gotcha

Jimmy72custom · 04-15-2006, 12:46 AM

trailzen · 04-15-2006, 07:41 AM

Thanks for the help everybody...I love this board!!

04-12-2006, 05:56 PM	#1
trailzen Registered User Join Date: Jan 2006 Location: Canada Posts: 71	How to place a bowtie OK the hood emblem arrived for my 70 blazer today,does anyone have info on were to drill the holes ,which end up ,etc THe hood its going on is the goodmark cowl hood so it never had a bowtie

04-12-2006, 06:06 PM	#3
trailzen Registered User Join Date: Jan 2006 Location: Canada Posts: 71	Re: How to place a bowtie here it is pre bowtie ...bumper changed to factory chrome already so try and ignore the ugly Attached Images

04-12-2006, 10:23 PM	#4
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Re: How to place a bowtie :hit: __________________ Always looking for a 2wd blazer

04-13-2006, 12:51 AM	#5
makovai Senior Member Join Date: Feb 2006 Location: oregon city Posts: 335	Re: How to place a bowtie that is so killer __________________ If it aint broke..............fix it till it is. www.fast77.com 1972 - 330 hp crate, 11" lift with 39x18 mickeys. 3/4 ton, cross steer, 4 wheel disc brakes 1996 Z71 w/ 35's

04-13-2006, 08:18 AM	#6
trailzen Registered User Join Date: Jan 2006 Location: Canada Posts: 71	Re: How to place a bowtie Thanks guys .....but the question remains...

04-13-2006, 11:17 AM	#7
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: How to place a bowtie I think the factory assembly manual has specs. Another way is to take a piece of paper & a pencil to a junkyard and do a "rubbing" of the front of a hood from a '69 or '70. Just pop off the emblem and run the pencil over the top. Make sure you get a marker like the center of the hood. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

04-13-2006, 03:41 PM	#8
trailzen Registered User Join Date: Jan 2006 Location: Canada Posts: 71	Re: How to place a bowtie Bouncy truck I love the rubbing idea unfortunately here in Canada an old truck at a wrecking yard is 1995 and if I asked to see a 70 they would probably laugh at me while jabbing me with pointed sticks

04-13-2006, 07:23 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: How to place a bowtie I can take pics of my 69 hood with the tape measure if you still need it... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-13-2006, 10:02 PM	#10
trailzen Registered User Join Date: Jan 2006 Location: Canada Posts: 71	Re: How to place a bowtie please do that frenchblue it would help alot

04-13-2006, 11:03 PM	#11
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: How to place a bowtie Do you have a factory assembly manual? It shows dimensions for the holes. I'll try to explain if I can. Looking at the hood - The hole on the left is 1.56" left of center and 1.84" from the bottom edge of the hood. The right hole is 1.56" right of center, putting the holes 3.12" apart. The right hole is 3.22" above the bottom edge of the hood and 1.38" above the first hole. I belive it says the holes are 1/64 dia., but it also has some other numbers there that I don't understand. Narrow edge of the emblem goes down. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

04-13-2006, 11:13 PM	#12
trailzen Registered User Join Date: Jan 2006 Location: Canada Posts: 71	Re: How to place a bowtie Thanks bouncy that'll work

04-13-2006, 11:25 PM	#13
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: How to place a bowtie Hey bouncy any idea what page thats on????????haa yaa right.... If ya need anymore help just let us know.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-14-2006, 04:35 AM	#14
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,769	Re: How to place a bowtie Here you go,straight from the assembly manual.(jeez I hate that thing) Not sure but I think the reproduction Bowtie's have off-set studs. Looks like the factory Bowtie's studs are straight across. At any rate...here's what the factory manual shows __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 04-14-2006 at 04:38 AM.

04-14-2006, 04:49 AM	#15
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,769	Re: How to place a bowtie Those demensions that Bouncy quoted are for the GMC badges. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

04-14-2006, 06:37 AM	#16
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: How to place a bowtie I responded to this once already, sweet rig btw but I am curious about the desire to have the bowtie on the hood, vehicle is obviously not stock? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

04-14-2006, 09:53 AM	#17
trailzen Registered User Join Date: Jan 2006 Location: Canada Posts: 71	Re: How to place a bowtie I just love the bowtie ,it kind of finishes the truck off ,right now when I look at it something is missing

04-14-2006, 11:17 AM	#18
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: How to place a bowtie Ah, I did put the GMC measurements. Thanks for the catch! The repop bow tie I put on my '69 (picks of the emblem in this thread- http://67-72chevytrucks.com/vboard/s...d.php?t=195577) had off-set studs and fit into the factory holes. I got it from The Truck Shop. I put a good coat of wax on it (front & back) before installing to help keep it nice looking. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

04-15-2006, 12:46 AM	#20
Jimmy72custom Registered User Join Date: Apr 2004 Location: Willits Ca Posts: 261	Re: How to place a bowtie

04-15-2006, 07:41 AM	#21
trailzen Registered User Join Date: Jan 2006 Location: Canada Posts: 71	Re: How to place a bowtie Thanks for the help everybody...I love this board!!

Register or Log In To remove these advertisements.