Our '66 Short Fleet Build - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChiefRocka** · 02-01-2009, 12:03 PM

Never mind...thought you guys were having a swap meet...my bad bro

joe231 · 02-01-2009, 12:10 PM

it might turn into a swap meet, dunno yet.....who were you asking about being there?

4dranch · 02-01-2009, 12:28 PM

Quote:

Originally Posted by ChiefRocka

Never mind...thought you guys were having a swap meet...my bad bro

Joe,
Whats up, you holding out on us? what parts you bringing

joe231 · 02-01-2009, 12:41 PM

i gots lot-o-parts.....unfortunately i need most of 'em

TimE · 02-01-2009, 12:46 PM

Quote:

Originally Posted by 4dranch

Joe,
Whats up, you holding out on us? what parts you bringing

He's already got a pic posted (see Joes avatar) of the cab he's hauling around in preparation...

Just funnin' with ya Joe.

4dranch · 02-01-2009, 12:47 PM

Quote:

Originally Posted by ChiefRocka

If you have the materials and know how...then by all means it is cheaper.

Although, if you consider the R&D, the fact that it's bolt in, and the powder coating....I think the $175 isn't too bad.

You think they'll be at your upcoming swap-meet ??

I agree with John. But if you decide to go a different route I got my e-brake at home depot for $1.89. if you want I will bring one to your swap meet..

TimE · 02-01-2009, 12:47 PM

Quote:

Originally Posted by joe231

i gots lot-o-parts.....unfortunately i need most of 'em

I've got lots of parts too...unfortunately, too many of mine have fallen off!!

joe231 · 02-01-2009, 12:50 PM

right now all i have is parts

Name: tear down (33).jpg
Views: 659
Size: 31.8 KB

4dranch · 02-01-2009, 12:53 PM

Quote:

Originally Posted by TimE

I've got lots of parts too...unfortunately, too many of mine have fallen off!!

I have a bumper sticker on my rice burner that says
"HONK IF PARTS FALL OFF"

joe231 · 02-01-2009, 12:53 PM

Quote:

Originally Posted by 4dranch

I agree with John. But if you decide to go a different route I got my e-brake at home depot for $1.89. if you want I will bring one to your swap meet..

what is that? can't tell from the pic....
it looks funny though

4dranch · 02-01-2009, 12:57 PM

Quote:

Originally Posted by joe231

what is that? can't tell from the pic....
it looks funny though

A big ole rock

joe231 · 02-01-2009, 01:08 PM

joe231 · 02-03-2009, 10:44 PM

alright fellas, got another question for you's
what trans mount do you use for the 700r-4?
if i look a mount up by the years of trucks that had the 700r-4,
it shows this one

but i think i need one like this for the original cross member, and beside that,
i like the looks of it better

so.....will a th350 or th400 mount work on the 700r-4???

Alan's Classic · 02-03-2009, 10:47 PM

Quote:

Originally Posted by joe231

so.....will a th350 or th400 mount work on the 700r-4???

I believe that is what I used on my 700R4 that I was going to use.

joe231 · 02-03-2009, 11:00 PM

i thought they would work, but wasn't sure

protrash64 · 02-03-2009, 11:31 PM

I havent crawled under the 'burb in awhile, but I think it uses the cylinder type. PO work that I havent touched....hard telling what it mite be out of actually. Ill check if youre interested; tomorrow sometime.

joe231 · 02-03-2009, 11:41 PM

dunno man, your burb is pretty low, might be tough to get under

but wait...you gots air!!!

ya Jeff, if you don't mind taking a peek, i'd appreciate it

protrash64 · 02-03-2009, 11:46 PM

Its easy now!!! Bags help you jack up a truck faster than ever. I'll look at it closer tomorrow and snap a shot or two.

joe231 · 02-04-2009, 12:12 AM

cool man
Thanks!!

**Captainfab** · 02-04-2009, 01:57 AM

The older 2 bolt mount for a th350 or 400 will work on a 700R4. You might need to open up the holes to accomodate the metric bolts......can't remember for sure.

scotts62 · 02-04-2009, 09:07 AM

The one in my '83 had the round one if that helps dude.

joe231 · 02-04-2009, 09:29 AM

thanks guys

protrash64 · 02-05-2009, 03:44 PM

Hey, I guess I lied

!!! Took a couple days to get under the truck and it had the square mount. Gettin olds a *****!!!

Anyway, here was what was under mine, Joe. If you see anything falling apart, let me know.

Looks like a factory type x-member...I used an aftermarket one in the pick-up. It looked like the one you had in the pic but has gussets off the frame mounts too. It is the heaviest one ever made by the now defunct 'Turner Enterprises'.

joe231 · 02-05-2009, 06:00 PM

funny stuff Jeff!!
Nice and thanks for the pics, looks good....
my "over the web troubleshooting" doesn't detect anything that needs attention.

protrash64 · 02-05-2009, 06:02 PM

That mount may have seen better days.........

02-01-2009, 12:03 PM	#351
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Our '66 Short Fleet Build Never mind...thought you guys were having a swap meet...my bad bro __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

02-01-2009, 12:10 PM	#352
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build it might turn into a swap meet, dunno yet.....who were you asking about being there? __________________ *CHEVY ONLY*

02-01-2009, 12:41 PM	#354
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build i gots lot-o-parts.....unfortunately i need most of 'em __________________ *CHEVY ONLY*

02-01-2009, 12:50 PM	#358
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build right now all i have is parts __________________ *CHEVY ONLY*

02-01-2009, 01:08 PM	#362
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build __________________ *CHEVY ONLY*

02-03-2009, 10:44 PM	#363
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build alright fellas, got another question for you's what trans mount do you use for the 700r-4? if i look a mount up by the years of trucks that had the 700r-4, it shows this one but i think i need one like this for the original cross member, and beside that, i like the looks of it better so.....will a th350 or th400 mount work on the 700r-4??? __________________ *CHEVY ONLY* Last edited by joe231; 02-03-2009 at 10:44 PM.

02-03-2009, 11:00 PM	#365
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build i thought they would work, but wasn't sure __________________ *CHEVY ONLY*

02-03-2009, 11:31 PM	#366
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Our '66 Short Fleet Build I havent crawled under the 'burb in awhile, but I think it uses the cylinder type. PO work that I havent touched....hard telling what it mite be out of actually. Ill check if youre interested; tomorrow sometime. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-03-2009, 11:41 PM	#367
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build dunno man, your burb is pretty low, might be tough to get under but wait...you gots air!!! ya Jeff, if you don't mind taking a peek, i'd appreciate it __________________ *CHEVY ONLY*

02-03-2009, 11:46 PM	#368
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Our '66 Short Fleet Build Its easy now!!! Bags help you jack up a truck faster than ever. I'll look at it closer tomorrow and snap a shot or two. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-04-2009, 12:12 AM	#369
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build cool man Thanks!! __________________ *CHEVY ONLY*

02-04-2009, 01:57 AM	#370
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Our '66 Short Fleet Build The older 2 bolt mount for a th350 or 400 will work on a 700R4. You might need to open up the holes to accomodate the metric bolts......can't remember for sure. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 02-04-2009 at 01:58 AM.

02-04-2009, 09:07 AM	#371
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: Our '66 Short Fleet Build The one in my '83 had the round one if that helps dude. __________________ Scott 93 crew cab build Project 62

02-04-2009, 09:29 AM	#372
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build thanks guys __________________ *CHEVY ONLY*

02-05-2009, 03:44 PM	#373
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Our '66 Short Fleet Build Hey, I guess I lied!!! Took a couple days to get under the truck and it had the square mount. Gettin olds a ***!!! Anyway, here was what was under mine, Joe. If you see anything falling apart, let me know. Looks like a factory type x-member...I used an aftermarket one in the pick-up. It looked like the one you had in the pic but has gussets off the frame mounts too. It is the heaviest one ever made by the now defunct 'Turner Enterprises'. Attached Images __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB** >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device Last edited by protrash64; 02-05-2009 at 03:44 PM. Reason: spelling



Register or Log In To remove these advertisements.

02-05-2009, 06:00 PM	#374
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Our '66 Short Fleet Build funny stuff Jeff!! Nice and thanks for the pics, looks good.... my "over the web troubleshooting" doesn't detect anything that needs attention. __________________ *CHEVY ONLY*

02-05-2009, 06:02 PM	#375
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Our '66 Short Fleet Build That mount may have seen better days......... __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

Register or Log In To remove these advertisements.