NEED EXPERT HELP!!! Junkyard find and two days to buy!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tkeduk8r** · 05-07-2002, 09:48 AM

found some low back buckets in a 73 blazer that look oh so close to what is supposed to be in my 70... they have the slight taper in the back cushion with the 1" chrome square in the middle... I would have to replace the seat covers however the seat sits comfy in the truck... Question is if the seat bolts up to the factory holes in the 73, will it bolt into the 70 bench seat holes??? I saw a black 72 gmc on the board recently that had 73 buckets in it, and looked good, but i think these are out of a earlier one....they guy wants 75 bucks for em, my prollem is im on break from school right now and i have to head back in two days... WHAT SHOULD I DO????

------------------
70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats)
84 Olds Cutlass
82 Honda CB900C

**CPNE** · 05-07-2002, 10:23 AM

The seats themselves will look nearly stock when recovered. The brackets will not work, the seats will sit too high and at wrong angle. Even if brackets are from 69-72 seats, you will still need to drill holes for them. 69-72 brackets are a direct bolt on to the seat frames. I think boardmember Tom Hand fabricated something that looked real nice, check him out. Also, Classic GM Sports makes the passenger side bucket brackets, but you still need to do something about the adjusting driver side.

Good luck

------------------
Jeff Jesseman
Cheyenne Parts Northeast
Franconia, NH

67 Chevy SWB Fleetside
70 GMC Burb 1/2 ton 2wd
72 Chevy Burb 3/4 ton 4x4

Parts bought and sold

tom hand · 05-07-2002, 10:35 AM

These are 73 buckets with 72 covers on them. I used a set of benchseat brackets on each one with an simple angle iron adapter to make them bolt on. It was very simple to do and everybody who sees them thinks they are stock. If you want I can send you more pics when I get home from work.

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

mark25 · 05-07-2002, 10:40 AM

for $75 i would buy them if foam isn't all ate up. sounds like the mounting issues are nothing to worry about, simple install.

**tkeduk8r** · 05-07-2002, 10:52 AM

thanks guys.. yeah doesnt look to be all eaten up, and is still soft, been in kinda a protected spot.. Tom I think i emailed you bout pics of your truck before and i would greatly appreciate any additional pics or drawings that you could provide on how the seats and modifications bolt up... does any one else have any suggestions, does 75 bucks sound like a fair price??? I saw a set at carlisle last spring for 1000 all done, but i dont want to get my self in a money pit... thanks again fellas....
--mike

------------------
70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats)
84 Olds Cutlass
82 Honda CB900C

tom hand · 05-07-2002, 10:57 AM

I send pics of the brackets when I get home from work at 6:00 or so

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

imaindianoutlaw · 05-07-2002, 10:58 AM

Cant find any stock one in reading? There are some down here in montgomery in a blazer 71/2 wants 10 a piece

------------------
Charles W. Hein
S. Williamsport PA

imaindianoutlaw@yahoo.com

REFRIGERATION TECH

1971 Rolling chassis

FOR SALE
1963 Pontiac Tempest
1965 Pontiac GTO
1956 Pontiac 2 dr

**tkeduk8r** · 05-07-2002, 11:30 AM

well interesting situation... im in grad school at Ball State in Indiana, and all my family is in Minnesota (where I am now)... I grew up in reading and taught metal/wood shop there last two years...in fact thats still where my truck is too... (i miss it), but im driving the cutlass and the bike at school (cheaper to operate) so thats the scoop, so unfortunatley i havent gotten to any good yards in PA for a while...ugh... anyway indian, what cond. are those seats in Montgomery in reasonable shape?? thanks for the advice fellas, keep it cmin, i need all the help i can get....
--mike

------------------
70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats)
84 Olds Cutlass
82 Honda CB900C

HuggerCST · 05-07-2002, 11:46 AM

Tom, I would like to have pics of those brackets to, if you don't mind. I'm in a similar situation, but my buckets are out of a later model. (76-77 or so) I have a couple of questions about the subject. (1) Will the '70 seat covers fit the 76-77 seats? (2)Did you have to modify the console to make it fit the floor? Thanks

------------------
'70 chevy swb cst
'70 chevy swb c-10 '70 chevy lwb for parts, '70 GMC lwb for parts, 2 '69 camaro RS's Ruston, Louisiana

imaindianoutlaw · 05-07-2002, 11:55 AM

Sure? They are intact just need redone! $20 for the pair! I will grab them one of these days if no one takes em. They are in a 71/2 hugger orange blazer that still has posi rears in it! R&R is the name of the place its on route 54

------------------
Charles W. Hein
S. Williamsport PA

imaindianoutlaw@yahoo.com

REFRIGERATION TECH

1971 Rolling chassis

FOR SALE
1963 Pontiac Tempest
1965 Pontiac GTO
1956 Pontiac 2 dr

tom hand · 05-07-2002, 12:08 PM

HuggerCST are the seats you are talking about lowbacks? If the answer is yes then they will fit. I am not sure what year they went to the highbacks on the newer trucks. I will post pics of the brackets when I get home from work. The console was a bolt in,the only differance between a 72-down console and a 73 -up console is the 73-up console has cupholders instead of seat belt holders.

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

[This message has been edited by tom hand (edited May 07, 2002).]

HuggerCST · 05-07-2002, 12:40 PM

I'm not sure about them being low backs, I haven't looked at them in about 6 months, and don't remember. I'll have to check that. Thanks.

*Fast68Chevy* · 05-07-2002, 02:51 PM

cant beileve yuo are finding such things in yard sover there in PA, damn,, interesitng, hope someone saves the parts, or...

------------------
Randy- Lincoln, IL
randy@ccaonline.com 2177353230
*many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham

current fleet: -71 C-10 350/CH465/3.07- basketcase, #1
-90 Cavalier 2.2L sky blue, a driver
-84 Z28 5.0L/700R4/3.73 daily driver
-84 Firebird/SE 2.8L/T-5/3.73/engine bad, project #2
-82 purple Trans Am, project #3
*Paint is overrated*
© RSS Enterprises 2000

**tkeduk8r** · 05-07-2002, 02:58 PM

anymore advice guys..... ttt... oh and i forgot, fouund some seatbelts out of a 88 s10 blazer sittin across from those buckets.. any suggestions....
--mike

------------------
70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats)
84 Olds Cutlass
82 Honda CB900C

tom hand · 05-07-2002, 06:56 PM

Ok here are the brackets again for any body that wants them. The first piture of the bracket I made It is just made of angleiron and some flat stock.

Here are a couple that show how they bolt up. They are simple adapters that make bench seat brackets bolt on. If your were to hold a set of bench seat brackets up to a set of 73 seats the pictures would make more sense.

And the finished product. You can not see the brackets I made unless you get on you hands and knees.[Maybe thats why I only show them to girls. LOL]

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

**tkeduk8r** · 05-07-2002, 11:40 PM

thank a million tom... that looks like it will work fine.. do you have any specific dimensions on those brackets??? Just an old shop teacher talking... anyway.. and what did you do bout the passenger seat??? those pics are great, how many more do you have??? thanks agian...
--mike

------------------
70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats)
84 Olds Cutlass
82 Honda CB900C

**tkeduk8r** · 05-08-2002, 10:36 AM

ttt

------------------
70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats)
84 Olds Cutlass
82 Honda CB900C

tom hand · 05-08-2002, 12:32 PM

Sorry I don't think I ever meaured them. I built them at work and just used the seat for measurements. It wast kinda like hold the angle iron up to the seat,put your thumb on how long it needs to be, walk over to the bandsaw and cut it. After I welded the flat stock on the angle, I just stuck up to the seat and marked it with a pencil where the holes needed to be drilled. I swear I never used a tape. I mean it was three pieces of metal and 8 holes. Sorry but if you are an old shop teacher you have done some of what I am talking about.

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

**tkeduk8r** · 05-08-2002, 01:48 PM

yes i have... but i had to ask anyway... thanks for all the help tom and everybody, think im gonna go pick them up tomorrow morning and go from there...
--mike

------------------
70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats)
84 Olds Cutlass
82 Honda CB900C

**tkeduk8r** · 05-09-2002, 08:55 PM

thanks again for the help fellas, picked up the seats today along with a few t3 headlights and a few console pieces... so now i just gotta get to working on it!!!!

------------------
70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats)
84 Olds Cutlass
82 Honda CB900C

flexsteelus · 04-12-2003, 05:28 PM

don't see any pics for this post if anyone has them let's see them

05-07-2002, 10:40 AM	#4
mark25 Registered User Join Date: Feb 2000 Location: Vassar,Ks 66543 Posts: 375	for $75 i would buy them if foam isn't all ate up. sounds like the mounting issues are nothing to worry about, simple install. __________________ '72 C-10 Cheyenne Super, 402/TH400, Bucket Seats, tilt, tach, AM/FM & shoulder harnesses and a ground up restoration

05-07-2002, 10:52 AM	#5
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	thanks guys.. yeah doesnt look to be all eaten up, and is still soft, been in kinda a protected spot.. Tom I think i emailed you bout pics of your truck before and i would greatly appreciate any additional pics or drawings that you could provide on how the seats and modifications bolt up... does any one else have any suggestions, does 75 bucks sound like a fair price??? I saw a set at carlisle last spring for 1000 all done, but i dont want to get my self in a money pit... thanks again fellas.... --mike ------------------ 70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats) 84 Olds Cutlass 82 Honda CB900C __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-07-2002, 10:57 AM	#6
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	I send pics of the brackets when I get home from work at 6:00 or so ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

05-07-2002, 10:58 AM	#7
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	Cant find any stock one in reading? There are some down here in montgomery in a blazer 71/2 wants 10 a piece ------------------ Charles W. Hein S. Williamsport PA imaindianoutlaw@yahoo.com REFRIGERATION TECH 1971 Rolling chassis FOR SALE 1963 Pontiac Tempest 1965 Pontiac GTO 1956 Pontiac 2 dr __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

05-07-2002, 11:30 AM	#8
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	well interesting situation... im in grad school at Ball State in Indiana, and all my family is in Minnesota (where I am now)... I grew up in reading and taught metal/wood shop there last two years...in fact thats still where my truck is too... (i miss it), but im driving the cutlass and the bike at school (cheaper to operate) so thats the scoop, so unfortunatley i havent gotten to any good yards in PA for a while...ugh... anyway indian, what cond. are those seats in Montgomery in reasonable shape?? thanks for the advice fellas, keep it cmin, i need all the help i can get.... --mike ------------------ 70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats) 84 Olds Cutlass 82 Honda CB900C __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-07-2002, 09:48 AM	#1
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	NEED EXPERT HELP!!! Junkyard find and two days to buy!!! found some low back buckets in a 73 blazer that look oh so close to what is supposed to be in my 70... they have the slight taper in the back cushion with the 1" chrome square in the middle... I would have to replace the seat covers however the seat sits comfy in the truck... Question is if the seat bolts up to the factory holes in the 73, will it bolt into the 70 bench seat holes??? I saw a black 72 gmc on the board recently that had 73 buckets in it, and looked good, but i think these are out of a earlier one....they guy wants 75 bucks for em, my prollem is im on break from school right now and i have to head back in two days... WHAT SHOULD I DO???? ------------------ 70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats) 84 Olds Cutlass 82 Honda CB900C __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-07-2002, 10:23 AM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	The seats themselves will look nearly stock when recovered. The brackets will not work, the seats will sit too high and at wrong angle. Even if brackets are from 69-72 seats, you will still need to drill holes for them. 69-72 brackets are a direct bolt on to the seat frames. I think boardmember Tom Hand fabricated something that looked real nice, check him out. Also, Classic GM Sports makes the passenger side bucket brackets, but you still need to do something about the adjusting driver side. Good luck ------------------ Jeff Jesseman Cheyenne Parts Northeast Franconia, NH 67 Chevy SWB Fleetside 70 GMC Burb 1/2 ton 2wd 72 Chevy Burb 3/4 ton 4x4 Parts bought and sold __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

05-07-2002, 10:35 AM	#3
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	These are 73 buckets with 72 covers on them. I used a set of benchseat brackets on each one with an simple angle iron adapter to make them bolt on. It was very simple to do and everybody who sees them thinks they are stock. If you want I can send you more pics when I get home from work. ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

05-07-2002, 11:46 AM	#9
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Tom, I would like to have pics of those brackets to, if you don't mind. I'm in a similar situation, but my buckets are out of a later model. (76-77 or so) I have a couple of questions about the subject. (1) Will the '70 seat covers fit the 76-77 seats? (2)Did you have to modify the console to make it fit the floor? Thanks ------------------ '70 chevy swb cst '70 chevy swb c-10 '70 chevy lwb for parts, '70 GMC lwb for parts, 2 '69 camaro RS's Ruston, Louisiana __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

05-07-2002, 11:55 AM	#10
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	Sure? They are intact just need redone! $20 for the pair! I will grab them one of these days if no one takes em. They are in a 71/2 hugger orange blazer that still has posi rears in it! R&R is the name of the place its on route 54 ------------------ Charles W. Hein S. Williamsport PA imaindianoutlaw@yahoo.com REFRIGERATION TECH 1971 Rolling chassis FOR SALE 1963 Pontiac Tempest 1965 Pontiac GTO 1956 Pontiac 2 dr __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

05-07-2002, 12:08 PM	#11
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	HuggerCST are the seats you are talking about lowbacks? If the answer is yes then they will fit. I am not sure what year they went to the highbacks on the newer trucks. I will post pics of the brackets when I get home from work. The console was a bolt in,the only differance between a 72-down console and a 73 -up console is the 73-up console has cupholders instead of seat belt holders. ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS [This message has been edited by tom hand (edited May 07, 2002).] __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

05-07-2002, 12:40 PM	#12
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I'm not sure about them being low backs, I haven't looked at them in about 6 months, and don't remember. I'll have to check that. Thanks. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

05-07-2002, 02:51 PM	#13
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	cant beileve yuo are finding such things in yard sover there in PA, damn,, interesitng, hope someone saves the parts, or... ------------------ Randy- Lincoln, IL randy@ccaonline.com 2177353230 many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham current fleet: -71 C-10 350/CH465/3.07- basketcase, #1 -90 Cavalier 2.2L sky blue, a driver -84 Z28 5.0L/700R4/3.73 daily driver -84 Firebird/SE 2.8L/T-5/3.73/engine bad, project #2 -82 purple Trans Am, project #3 Paint is overrated* © RSS Enterprises 2000

05-07-2002, 02:58 PM	#14
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	anymore advice guys..... ttt... oh and i forgot, fouund some seatbelts out of a 88 s10 blazer sittin across from those buckets.. any suggestions.... --mike ------------------ 70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats) 84 Olds Cutlass 82 Honda CB900C __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-07-2002, 06:56 PM	#15
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	Ok here are the brackets again for any body that wants them. The first piture of the bracket I made It is just made of angleiron and some flat stock. Here are a couple that show how they bolt up. They are simple adapters that make bench seat brackets bolt on. If your were to hold a set of bench seat brackets up to a set of 73 seats the pictures would make more sense. And the finished product. You can not see the brackets I made unless you get on you hands and knees.[Maybe thats why I only show them to girls. LOL] ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS



Register or Log In To remove these advertisements.

05-07-2002, 11:40 PM	#16
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	thank a million tom... that looks like it will work fine.. do you have any specific dimensions on those brackets??? Just an old shop teacher talking... anyway.. and what did you do bout the passenger seat??? those pics are great, how many more do you have??? thanks agian... --mike ------------------ 70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats) 84 Olds Cutlass 82 Honda CB900C __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-08-2002, 10:36 AM	#17
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	ttt ------------------ 70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats) 84 Olds Cutlass 82 Honda CB900C __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-08-2002, 12:32 PM	#18
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	Sorry I don't think I ever meaured them. I built them at work and just used the seat for measurements. It wast kinda like hold the angle iron up to the seat,put your thumb on how long it needs to be, walk over to the bandsaw and cut it. After I welded the flat stock on the angle, I just stuck up to the seat and marked it with a pencil where the holes needed to be drilled. I swear I never used a tape. I mean it was three pieces of metal and 8 holes. Sorry but if you are an old shop teacher you have done some of what I am talking about. ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

05-08-2002, 01:48 PM	#19
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	yes i have... but i had to ask anyway... thanks for all the help tom and everybody, think im gonna go pick them up tomorrow morning and go from there... --mike ------------------ 70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats) 84 Olds Cutlass 82 Honda CB900C __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

05-09-2002, 08:55 PM	#20
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	thanks again for the help fellas, picked up the seats today along with a few t3 headlights and a few console pieces... so now i just gotta get to working on it!!!! ------------------ 70 C10 SWB 4X4 ps, pb, tilt, console, sliding back window (Need Bed and Bucket Seats) 84 Olds Cutlass 82 Honda CB900C __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

04-12-2003, 05:28 PM	#21
flexsteelus Registered User Join Date: Apr 2003 Location: Portland Or Posts: 2	don't see any pics for this post if anyone has them let's see them __________________ 68' "Swb" 2nd owner

Register or Log In To remove these advertisements.