89 burban 5 lug to 6ug conversion with oem parts is it possible? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slammed89burban · 01-22-2011, 05:07 AM

ive been searching for a while but dont seem to find what im looking for, i am trying to swap my 5 lug 2wd suburban to a 6 lug and i have a 89 suburban 4x4 as a parts truck if i can do this or use any of these parts in the process.

please if anyone can even point me the the right direction someone has had to have tried this.

thanks,
Jeff

1badgmc · 01-22-2011, 10:32 AM

I was working on a reply for you, until I realized you're trying to convert an '89 Suburban. Since the '89 Suburban is still a square body, you'll probably be able to better find someone to help if you posted this in the '73-'91 SUV forum or even the '73-'87 truck forum.

russgt · 01-22-2011, 10:52 AM

I have done a similar swap on a 70 c10. I dont know if these parts would work on your 89, but a swap rotor for the front and maybe you can take the axle shafts out ( or complete axle) of the 4x4 and put them in the 2 wheels axle?
http://67-72chevytrucks.com/vboard/s...d.php?t=340264

You would have to watch your wheel studs or you may end up with different lug nuts on the front and back

slammed89burban · 01-22-2011, 01:20 PM

thanks for the reply's and thanks to whoever moved it

mopar346 · 01-23-2011, 11:28 AM

What is the wheel mounting surface to surface width on both assemblies? Spring perch width on both? Can you just swap complete assemblies by moving the perches and maybe using an adapt-a-joint. The other option maybe to have the axles cut down and re-splined, if the wheel bearing is the same. You could order custom axles from someone like Dr.Diff. One thing to keep in mind is no matter what you do, you have to figure on brakes that match.

kevinr1970 · 01-25-2011, 12:46 AM

I just went 6-lug to 5-lug:
http://67-72chevytrucks.com/vboard/s...d.php?t=433726

There is a post in there about the spline count being different for 1989-91 so your parts truck might have what you need.

I believe that CPP or ECE (or PDQ?!?) makes a 6-lug rotor for 67-72 trucks that have converted to the "newer" '73-87 style front suspension but want to maintain the 6-lug for originality.

63chevyll · 01-25-2011, 12:54 AM

hmmm, id like to know too about those rotors

russgt · 01-25-2011, 05:41 PM

http://www.classicperform.com/Store/...ruck/CP4R5.htm

01-22-2011, 05:07 AM	#1
slammed89burban Registered User Join Date: May 2009 Location: bay area CA Posts: 3	89 burban 5 lug to 6ug conversion with oem parts is it possible? ive been searching for a while but dont seem to find what im looking for, i am trying to swap my 5 lug 2wd suburban to a 6 lug and i have a 89 suburban 4x4 as a parts truck if i can do this or use any of these parts in the process. please if anyone can even point me the the right direction someone has had to have tried this. thanks, Jeff

01-22-2011, 10:32 AM	#2
1badgmc Registered User Join Date: Feb 2000 Location: Wichita Falls, Texas Posts: 3,153	Re: 89 burban 5 lug to 6ug conversion with oem parts is it possible? I was working on a reply for you, until I realized you're trying to convert an '89 Suburban. Since the '89 Suburban is still a square body, you'll probably be able to better find someone to help if you posted this in the '73-'91 SUV forum or even the '73-'87 truck forum. __________________ '91 GMC RC Sportside '98 Chevy Suburban '88 Chevy Crew Cab Dually

01-22-2011, 10:52 AM	#3
russgt Registered User Join Date: May 2008 Location: Vernon, WI Posts: 904	Re: 89 burban 5 lug to 6ug conversion with oem parts is it possible? I have done a similar swap on a 70 c10. I dont know if these parts would work on your 89, but a swap rotor for the front and maybe you can take the axle shafts out ( or complete axle) of the 4x4 and put them in the 2 wheels axle? http://67-72chevytrucks.com/vboard/s...d.php?t=340264 You would have to watch your wheel studs or you may end up with different lug nuts on the front and back __________________ 68 stepside 76 blazer 86 Silverado 07 Sierra Z71 17 Max Trailering 6.2 Crew 71 Nova SS My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=363634 Last edited by russgt; 01-22-2011 at 10:56 AM.

01-22-2011, 01:20 PM	#4
slammed89burban Registered User Join Date: May 2009 Location: bay area CA Posts: 3	Re: 89 burban 5 lug to 6ug conversion with oem parts is it possible? thanks for the reply's and thanks to whoever moved it

01-23-2011, 11:28 AM	#5
mopar346 Registered User Join Date: Jan 2011 Location: Quincy, FL Posts: 533	Re: 89 burban 5 lug to 6ug conversion with oem parts is it possible? What is the wheel mounting surface to surface width on both assemblies? Spring perch width on both? Can you just swap complete assemblies by moving the perches and maybe using an adapt-a-joint. The other option maybe to have the axles cut down and re-splined, if the wheel bearing is the same. You could order custom axles from someone like Dr.Diff. One thing to keep in mind is no matter what you do, you have to figure on brakes that match.

01-25-2011, 12:46 AM	#6
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Re: 89 burban 5 lug to 6ug conversion with oem parts is it possible? I just went 6-lug to 5-lug: http://67-72chevytrucks.com/vboard/s...d.php?t=433726 There is a post in there about the spline count being different for 1989-91 so your parts truck might have what you need. I believe that CPP or ECE (or PDQ?!?) makes a 6-lug rotor for 67-72 trucks that have converted to the "newer" '73-87 style front suspension but want to maintain the 6-lug for originality. __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

01-25-2011, 12:54 AM	#7
63chevyll gets board easy....... Join Date: Mar 2009 Location: Colorado Springs Posts: 717	Re: 89 burban 5 lug to 6ug conversion with oem parts is it possible? hmmm, id like to know too about those rotors

01-25-2011, 05:41 PM	#8
russgt Registered User Join Date: May 2008 Location: Vernon, WI Posts: 904	Re: 89 burban 5 lug to 6ug conversion with oem parts is it possible? http://www.classicperform.com/Store/...ruck/CP4R5.htm __________________ 68 stepside 76 blazer 86 Silverado 07 Sierra Z71 17 Max Trailering 6.2 Crew 71 Nova SS My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=363634



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.