C10Slim's 66 Build Thread - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10Slim · 09-16-2010, 09:23 AM

Quote:

Originally Posted by apachedaddy

Could you give me some info on your steering column and wheel. Part numbers/IDIDIT??/dealer/ is it a retro fix column? Was looking at the IDIDIT colums from summit and wanted to see if there others out there that may be cheaper is all. Thanks for any info you might have for me.

It is an IDIDIT column retro fit series 1140657020 (column shift). The wheel, hub and horn button are Billet Specialties classic series.

I found the cheapest price on the column was Performance Online, they also had a 20% off moving sale going on at the time, so I really got a deal.

C10Slim · 10-12-2010, 08:59 PM

Almost done wiring! All the underhood wiring is complete. This flex-a-lite fan controller is awesome. Runs 2 stage will start a 40% and then ramp up to 100% as you reach temp. Also let the can run for 30 seconds after you shut it down. We also got everything in the dash wired up and the gauge panel mounted. We took the wiring through the driver side inner fender/wheel well and it worked out great. All we have left is to install the grille, headlights, parking lights and trim and the wiring will finally be complete! I also have a glass guy coming this weekend to install the front and rear glass. She is so close to being road worthy I can almost taste it!

C10Slim · 10-12-2010, 09:04 PM

Few more...

protrash64 · 10-12-2010, 09:25 PM

Nice work Slim........lookin' good.

Dinos63 · 10-13-2010, 12:45 AM

slick!! i am diggin the gauges

C10Slim · 01-05-2011, 10:04 PM

Painted the bed wood this weekend with KBS rust seal and blacktop gloss top coat. It turned out great looks like black glass. I just need to put the new polished bolt set in.

likaroc13 · 01-05-2011, 10:09 PM

that looks awesome! nice work

packrat42 · 01-06-2011, 04:48 PM

You have yourself a very nice truck

Laz · 01-06-2011, 06:58 PM

Duuuuuuuuuuuuuuude... this truck is amazing!

I love the bed.

C10Slim · 01-06-2011, 07:28 PM

Thanks guys! Really pleased with the way it turned out. I finished putting in the carpet, door sills, handles and door rubbers today.
Posted via Mobile Device

BigPhil66 · 01-06-2011, 09:07 PM

Great job...I love the Bed!!!!!

C10Slim · 01-06-2011, 09:20 PM

Short clip of the first drive around the neighborhood. Need to have the mufflers welded on, an alignment done, inspection and she will be ready to star crusing.

http://www.youtube.com/watch?v=LSJI0adFq2c

ratty 46 · 01-06-2011, 10:33 PM

Kick ass build.

Nice job so far.

Ratty 46

Miller92 · 01-06-2011, 11:22 PM

Kick ass build Slim! I've got a '63 and my plans are pretty much what you done but with a few different things.

How far is Needville from Magnolia? Any idea?

iiizman · 01-07-2011, 12:23 AM

It's around 70 miles

monolith · 01-07-2011, 03:48 AM

LOVE the stance!

C10Slim · 02-21-2011, 11:14 AM

I forgot to post the bed 100% completed so here is that. I also scored a set of 96 Chevy seats on CL this weekend. MUCH better sitting position than the bench. Plus it's powered on the drive side. I just need to have them recovered in black leather.

I also started a new project this week making kick panel speaker enclosures. These will house 6.5" components.

C10Slim · 02-21-2011, 11:15 AM

few more

likaroc13 · 02-21-2011, 02:29 PM

looking good! really like that bed...think i might go black on mine when i redo it someday

10-12-2010, 08:59 PM	#102
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: C10Slim's 66 Build Thread Almost done wiring! All the underhood wiring is complete. This flex-a-lite fan controller is awesome. Runs 2 stage will start a 40% and then ramp up to 100% as you reach temp. Also let the can run for 30 seconds after you shut it down. We also got everything in the dash wired up and the gauge panel mounted. We took the wiring through the driver side inner fender/wheel well and it worked out great. All we have left is to install the grille, headlights, parking lights and trim and the wiring will finally be complete! I also have a glass guy coming this weekend to install the front and rear glass. She is so close to being road worthy I can almost taste it! Attached Images

10-12-2010, 09:04 PM	#103
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: C10Slim's 66 Build Thread Few more... Attached Images

10-12-2010, 09:25 PM	#104
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: C10Slim's 66 Build Thread Nice work Slim........lookin' good. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

10-13-2010, 12:45 AM	#105
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: C10Slim's 66 Build Thread slick!! i am diggin the gauges __________________ CHEVY ONLY... Nothin Else !

01-05-2011, 10:04 PM	#106
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: C10Slim's 66 Build Thread Painted the bed wood this weekend with KBS rust seal and blacktop gloss top coat. It turned out great looks like black glass. I just need to put the new polished bolt set in. Attached Images

01-05-2011, 10:09 PM	#107
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: C10Slim's 66 Build Thread that looks awesome! nice work

01-06-2011, 04:48 PM	#108
packrat42 Registered User Join Date: Sep 2008 Location: Rutherfordton, North Carolina Posts: 328	Re: C10Slim's 66 Build Thread You have yourself a very nice truck __________________ '72 Nova '71 C10 '63 VW Beetle ...............................____ .................________-\|___\____ ..;.;;.:;:;.,;.\|__(O)___\|____/_(O)\| _______________________________________

01-06-2011, 06:58 PM	#109
Laz Registered User Join Date: Jan 2010 Location: Del Rio, TX Posts: 47	Re: C10Slim's 66 Build Thread Duuuuuuuuuuuuuuude... this truck is amazing! I love the bed. __________________ Betsy - 1966 C10 Stepside :: A very long-term work in progress

01-06-2011, 07:28 PM	#110
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: C10Slim's 66 Build Thread Thanks guys! Really pleased with the way it turned out. I finished putting in the carpet, door sills, handles and door rubbers today. Posted via Mobile Device Attached Images Last edited by C10Slim; 01-06-2011 at 09:12 PM.

01-06-2011, 09:07 PM	#111
BigPhil66 Registered User Join Date: Aug 2010 Location: Riverside Ca. Posts: 47	Re: C10Slim's 66 Build Thread Great job...I love the Bed!!!!!

01-06-2011, 10:33 PM	#113
ratty 46 Registered User Join Date: Jun 2009 Location: Atlanta, Ga. Posts: 1,104	Re: C10Slim's 66 Build Thread Kick ass build. Nice job so far. Ratty 46

01-06-2011, 11:22 PM	#114
Miller92 Registered User Join Date: May 2010 Location: Magnolia, Texas Posts: 245	Re: C10Slim's 66 Build Thread Kick ass build Slim! I've got a '63 and my plans are pretty much what you done but with a few different things. How far is Needville from Magnolia? Any idea?

01-07-2011, 12:23 AM	#115
iiizman Registered User Join Date: Jul 2010 Location: Houston Posts: 66	Re: C10Slim's 66 Build Thread It's around 70 miles __________________ Bad Decisions usually make for Good Stories.

01-07-2011, 03:48 AM	#116
monolith Zero Albedo Join Date: Mar 2009 Location: San Gabriel, California Posts: 478	Re: C10Slim's 66 Build Thread LOVE the stance! __________________ Baz "Deserve's got nothin' to do with it." 66 GMC 1500 wideside longbed 250 4spd "Project Rekker"http://67-72chevytrucks.com/vboard/s...d.php?t=467467 65 GMC 1Ton Panelhttp://67-72chevytrucks.com/vboard/s...32#post4794432 65 Chevy Panel (former U.S.Navy truck) 64 Chevy Suburban Carryall 4x4http://67-72chevytrucks.com/vboard/s...d.php?t=358348 64 GMC 1000 wideside longbed 305 4spdhttp://67-72chevytrucks.com/vboard/s....php?p=3600890(Rip- parts truck now) 68 Dodge Charger

02-21-2011, 11:14 AM	#117
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: C10Slim's 66 Build Thread I forgot to post the bed 100% completed so here is that. I also scored a set of 96 Chevy seats on CL this weekend. MUCH better sitting position than the bench. Plus it's powered on the drive side. I just need to have them recovered in black leather. I also started a new project this week making kick panel speaker enclosures. These will house 6.5" components. Attached Images



Register or Log In To remove these advertisements.

02-21-2011, 11:15 AM	#118
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: C10Slim's 66 Build Thread few more Attached Images

02-21-2011, 02:29 PM	#119
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: C10Slim's 66 Build Thread looking good! really like that bed...think i might go black on mine when i redo it someday

Register or Log In To remove these advertisements.