F/S GM NOS 4wd Transfer Case Mount Bushings

[Classic Bowties]

4wd four piece NOS transfer case side support mount bushing set, you will receive two upper (thin) and two lower (thick) rubber cushions. $130. shipped via USPS. Will accept paypal, check or money orderl as forms of payment, if using paypal option add 3%. Thanks for looking, Mel


***Qty. Six NOS 4 piece T/C rubber bushing-cushion setups Sold/Shipped***

.

[Njeiv]

Mel, If it’s for a 205 transfer case I’ll take it

[Classic Bowties]

Originally Posted by Njeiv

Mel, If it’s for a 205 transfer case I’ll take it

Hey Nic, yes these are correct for all 67-72 K/5-10-1500-20-2500 4wd's with both 3/4 speed manual and TH350/auto transmissions, the transfer case mounted support brackets themselves had differences over the years (see below manual pics) but the rubber bushings/cushions were the same. We currently have a few of these four piece NOS t/c rubber bushing setups available/on hand if you need more than one set, also if needed we can supply you with this pair of NOS t/c bushing steel spacers/sleeves (see below red arrows) for $35. Let me know and we'll get your combined total figured up on these and the NOS grill emblem from the other thread, Mel
.

[Classic Bowties]

More pics...

[Classic Bowties]

Originally Posted by Njeiv

I’ll take it

Funds received for one 4 pc. set of NOS t/c mount bushings and the added pair of NOS steel t/c bushing spacer sleeves, let me know when you're ready to finalize this shipment/order and we'll get it packed and headed your way. Thanks again on the multiple purchases, Mel

[Classic Bowties]

Just updated top post, we have two 4 pc. NOS t/c cushion-bushing setups remaining/on hand. Mel

[badd71]

I will take a 4 piece set and 2 steel bushings.

[Classic Bowties]

Originally Posted by badd71

I will take a 4 piece set and 2 steel bushings.

Okay, the 4 pc. NOS rubber bushing sets are $125. shipped and then add $35. more on the pair of NOS steel spacers/sleeves, will return our info for sending payment now. Thanks, Mel

[bls6772]

Do you have any bushings and and spacers left ?

[Classic Bowties]

Originally Posted by badd71

I will take a 4 piece set and 2 steel bushings.

Funds received on the NOS transfer case rubber bushing & steel spacer setup, your package went out via USPS first class on Thu. 02/13 and the expected delivery date is Tue. 02/18. Thanks again and let me know if we can help with any other 67-72 parts needs, Mel

[Classic Bowties]

Originally Posted by bls6772

Do you have any bushings and and spacers left ?

Yes, we can supply you with the four NOS rubber t/c bushings and the NOS pair of steel bushing spacers, will package together and combine shipping with requested parts from the other NOS parts thread. Thanks, Mel

[Classic Bowties]

Originally Posted by bls6772

Do you have any bushings and and spacers left?

The transfer case rubber bushings and steel spacers have been packed/shipped with your items from the other NOS parts f/s thread, the package went out via USPS priority on Fri. 02/14 and the expected delivery day is Tue. 02/18. Thanks again and let me know if we can help with any other 67-72 parts needs, Mel

[Classic Bowties]

Originally Posted by Njeiv

Mel, If it’s for a 205 transfer case I’ll take it

The NOS t/c rubber bushings and steel spacer sleeves are under way, your multi-piece NOS parts order went out via USPS priority on Thu. 02/27 and the expected delivery date is this Sat. 02/29. Thanks again and let me know if we can help with any other 67-72 parts needs, Mel

[Jcfcamaro]

I'd better get a set too.

[Classic Bowties]

Originally Posted by Jcfcamaro

I'd better get a set too.

When asking for the set, are you wanting the NOS rubber t/c bushings and an NOS pair of steel bushing spacers? They were offered/priced separately above. Mel

[Jcfcamaro]

Originally Posted by Classic Bowties

When asking for the set, are you wanting the NOS rubber t/c bushings and an NOS pair of steel bushing spacers? They were offered/priced separately above. Mel

Rubber bushings for the transfer case .I looked at my old steel sleeves this A.M and think they will be ok.

[Classic Bowties]

Originally Posted by Jcfcamaro

Rubber bushings for the transfer case .I looked at my old steel sleeves this A.M and think they will be ok.

Okay, we can get the set of four NOS t/c rubber bushings headed your way, our info for sending payment has been returned 02/28. Thanks, Mel

[davischevy]

Do you have another set of upper and lower cushions?

[Jcfcamaro]

PayPal sent.

[Classic Bowties]

Originally Posted by davischevy

Do you have another set of upper and lower cushions?

Yes, we can get an NOS four piece set headed your way also, the payment options are listed in top post of thread, confirm method of choice and we'll get that info returned back to you. Thanks, Mel

[davischevy]

I'm in no hurry, so I will mail you a check.

Thanks

[Classic Bowties]

Originally Posted by davischevy

I'm in no hurry, so I will mail you a check.

Thanks

Our info for sending funds by mail was just returned on Fri. 02/28, please confirm your mailing address and we'll get the parts ready for shipment. Thanks, Mel

[Classic Bowties]

Originally Posted by Jcfcamaro

PayPal sent.

The 4 piece NOS rubber bushing set has been shipped, your package went out via USPS first class on Fri. 02/28 and the expected delivery day is Tue. 03/03. Thanks again and let me know if we can help with any other 67-72 parts needs, Mel

[CUSTOM/10]

HI Mel,
I'll take a 4 piece set of rubber mounts.

Gary

[davischevy]

I went ahead and sent PP for mine.

Thanks