Replacing the “Fuel Sock”?

[custom10nut]

Here’s a thought that just came to mind.
How does one go about replacing the “Fuel Sock” in a stock in cab gas tank?
And another question is, where would I get one?
Do you just go in through the top front of the tank, where the fuel line comes out?
I just saw a FB post, and the guy shows on picture of the remnants of his, with the caption “well it lasted 49 years”.
In my 70, I’ve never replaced mine. And to my knowledge it’s still the original.
If it’s a good idea to replace it, I’m gonna, so I don’t get stranded somewhere someday.

[raggedjim]

Here's one, a google search brings back others. I got one when I had to replace my sending unit.

Rg

https://www.americanclassic.com/1967...CABEgI0_fD_BwE

[GASoline71]

I got mine from here: https://www.fillingstation.com/

You just need to remove the sending unit/fuel pick up, and its right there on the end of the pick up. Easy to install, just a pain in the butt to get to.

Gary

[rpmerf]

Rock auto calls it a Fuel Pump Strainer
https://www.rockauto.com/en/catalog/...+strainer,6212

[Ol Blue K20]

I replaced the sender with a new one. The sender came with the sock.

[steves1967]

Originally Posted by custom10nut

Here’s a thought that just came to mind.
How does one go about replacing the “Fuel Sock” in a stock in cab gas tank?
And another question is, where would I get one?
Do you just go in through the top front of the tank, where the fuel line comes out?
I just saw a FB post, and the guy shows on picture of the remnants of his, with the caption “well it lasted 49 years”.
In my 70, I’ve never replaced mine. And to my knowledge it’s still the original.
If it’s a good idea to replace it, I’m gonna, so I don’t get stranded somewhere someday.

Hey, that was me! I bought a new sending unit for the truck, then I bought the Tanks, Inc adapter and dropped an electric pump into the stock tank! Now I'm ready for the L31 350 engine, or the 496BB, or and LS swap!

[Already Gone]

While we are talking about gas tanks is the actual sending unit still available for our trucks. I looked on Rock Auto and didn't see one listed.

[SwitchbladeII]

Originally Posted by custom10nut

Here’s a thought that just came to mind.
How does one go about replacing the “Fuel Sock” in a stock in cab gas tank?
And another question is, where would I get one?
Do you just go in through the top front of the tank, where the fuel line comes out?
I just saw a FB post, and the guy shows on picture of the remnants of his, with the caption “well it lasted 49 years”.
In my 70, I’ve never replaced mine. And to my knowledge it’s still the original.
If it’s a good idea to replace it, I’m gonna, so I don’t get stranded somewhere someday.

Good idea to replace, I replaced one in my last project and it came apart in my hand when I removed it. There are two sizes available 3/8" and 5/16" so I would check the tube before ordering, mine was a 5/16" and got a 5/16" but it was still a little loose so I had to do a little crimping to get it tight. If I remember right the remnants of the of the metal ring didn't come loose easily. Removal of sender is easy as stated in other post.

[raggedjim]

Originally Posted by Already Gone

While we are talking about gas tanks is the actual sending unit still available for our trucks. I looked on Rock Auto and didn't see one listed.

They are available, Rockauto doesn't list them though, not sure why.

[gcburdic]

Originally Posted by custom10nut

Here’s a thought that just came to mind.
How does one go about replacing the “Fuel Sock” in a stock in cab gas tank?
And another question is, where would I get one?
Do you just go in through the top front of the tank, where the fuel line comes out?
I just saw a FB post, and the guy shows on picture of the remnants of his, with the caption “well it lasted 49 years”.
In my 70, I’ve never replaced mine. And to my knowledge it’s still the original.
If it’s a good idea to replace it, I’m gonna, so I don’t get stranded somewhere someday.

If you want to replace full unit, I have a complete fuel sending unit I pulled from my in cab tank-used for 3k miles.
Be glad to sell to you $10 + shipping. I will put in truck parts forum with pictures and give you 1st dibs.

[SRU1436]

I literally just replaced my fuel sock last week. Mine had the original one which basically disintegrated. I had the clean the remnants from inside the tank.

[Lee H]

I replaced the sock in 2013 as part of my frame off, no sure where I got it. About four months ago I had the carb rebuilt and the rebuilder told me there was a little debris in the bowls, check your filter. I opened it up, Russell 40 microns, and it was full of fine particles, I cleaned it out and replaced it. I pulled the sending unit to check the tank, the sock was mostly gone, I removed what was left and replaced the sending unit. I opened the filter again last week and its about 1/4 full again. Here's a picture with a coin to judge the particle size.

[raggedjim]

Originally Posted by Lee H

I replaced the sock in 2013 as part of my frame off, no sure where I got it. About four months ago I had the carb rebuilt and the rebuilder told me there was a little debris in the bowls, check your filter. I opened it up, Russell 40 microns, and it was full of fine particles, I cleaned it out and replaced it. I pulled the sending unit to check the tank, the sock was mostly gone, I removed what was left and replaced the sending unit. I opened the filter again last week and its about 1/4 full again. Here's a picture with a coin to judge the particle size.

What is it? Is it magnetic?

[Lee H]

Originally Posted by raggedjim

What is it? Is it magnetic?

That is the debris from inside the fuel filter. I suspect it's the remnants of the sock. Not magnetic.

[fdbdw]

Originally Posted by Lee H

I replaced the sock in 2013 as part of my frame off, no sure where I got it. About four months ago I had the carb rebuilt and the rebuilder told me there was a little debris in the bowls, check your filter. I opened it up, Russell 40 microns, and it was full of fine particles, I cleaned it out and replaced it. I pulled the sending unit to check the tank, the sock was mostly gone, I removed what was left and replaced the sending unit. I opened the filter again last week and its about 1/4 full again. Here's a picture with a coin to judge the particle size.

I had same issue in my last truck, clogged the fuel pump, filter and made its way to the carb. I would clean them out and it would reappear, took me for ever to figure out what it was. It’s an easy replacement and should be at the top of the “ to do list” if it’s never been done.

[DennisP]

Had the same problem with mine a few rears back. The sock had completely disintegrated . After the P.I.T.A. of cleaning out the tank, I installed a in line fuel filter under the cab where the fuel line comes out of the tank, and did not replace the pickup sock. Can't remember exactly, but I think I got this tip from someone on here.