OR Parting out 72 K10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 04-27-2012, 01:58 AM

Parting out a 72 Suburban K10 350, TH350, NP205, and 3.73 gear This thread is for all the parts that are common to both the Pu's, Suburban's, and Blazer's. All prices are plus shipping.

All the following parts are hot tanked and dipped.

4x4 trans-tcase cross member. 75.00
Engine cross member. 75.00 this one sold, have 2 more
Shock mounts. 12.50 each
Rear spring hangers with supports. 35.00 each
Front disc brake stone sheilds. 85.00 pair sold
71-early 72 spindle. 50.00
Tie rod with tight ends and straight. 45.00 sold
Rear u-bolt plates. pair 25.00
RH axle 71-early 72 needs u-joint. 65.00
LH axle 71-early 72 inner half only. 35.00
T-case support. Mounts to the t-case and RH frame rail. Needs rubbers. 40.00
T-case adapter rubber mounts complete and original. Nice condition. 30.00 sold
Front spring shackles. 20.00

Chrome T-case shift stick with knob, boot, ring. nice condition. 110.00 sold
LH chrome vent window. Chrome nice, vertical divider rubber bad other rubber driver qaulity. 40.00 sold
RH chrome vent window. DQ rubbers, 45.00

More to come.

**Gary 70 Jimmy** · 04-27-2012, 02:20 AM

Will you seperate I just need T-case shifter boot, ring.

**burb71** · 04-27-2012, 04:18 AM

Can I please see a close up pic of the chrome on the drivers side vent window.

**WETOWM** · 04-27-2012, 07:23 AM

I will take the transfur case adapter plate mounts and the disc brake backing plates as long as the backing plates are nice and not all banged up thanks

teeitup · 04-27-2012, 07:52 AM

Tom, I'm needing a nice 4 speed shifter knob. Thanks Randy

**DeadheadNM** · 04-27-2012, 08:39 AM

Any chance you have all the auto tranny linkage parts to the carb?

**DeadheadNM** · 04-27-2012, 08:47 AM

I'll take the tie rod. Thanks, Pete

sdailey · 04-27-2012, 10:21 AM

I'll take the brake dust shields as long as they are straight and not damaged.

Can I get some better pics?

*sharpie1972* · 04-27-2012, 10:27 AM

Quote:

Originally Posted by Gary 70 Jimmy

Will you seperate I just need T-case shifter boot, ring.

I'll take the shifter and knob if we can make the split work. Thanks, Sharpie

*mrdana60* · 04-27-2012, 03:02 PM

how much shipped for the trans crossmember to 35960. will take it pending price shipped ?

**tll74** · 04-27-2012, 06:27 PM

I'll get back to all in a couple hours. Thanks

4xshort · 04-27-2012, 09:26 PM

Hi Tom, Id like to put my name on the a/c vacuum pod bracket. Thanks Josh

BuildinA68 · 04-27-2012, 09:59 PM

Do you have all 4rear spring hangers? If so give me a shipping quote to 24556. Very interested.
Thanks
Posted via Mobile Device

**tll74** · 04-27-2012, 10:03 PM

Quote:

Originally Posted by Gary 70 Jimmy

Will you seperate I just need T-case shifter boot, ring.

Gary, If you and Dennis work it out so I get the 110.00 plus shipping, no problem. P/S the 402 heat stove is coming out of dip tank this weekend.

Quote:

Originally Posted by burb71

Can I please see a close up pic of the chrome on the drivers side vent window.

Pics to come soon.

Quote:

Originally Posted by WETOWM

I will take the transfur case adapter plate mounts and the disc brake backing plates as long as the backing plates are nice and not all banged up thanks

I have close ups of the backing plates I'll post soon. They have no dings, dents, and minor pitting from west coast rust. I think they are very nice.

Quote:

Originally Posted by teeitup

Tom, I'm needing a nice 4 speed shifter knob. Thanks Randy

Randy, Yes I do. I have several of them. The best one is probably the one in the truck from the wiring, it was low mileage. I'll PM you soon on the pile of parts you have for me.

Quote:

Originally Posted by DeadheadNM

Any chance you have all the auto tranny linkage parts to the carb?

Which parts are you looking for? Maybe the bracket for the kick down cable which mounts to the LH rear intake bolts? What ever it is I have it. Just pulled a 72 C10 350 TH350 in the shop to part.

Quote:

Originally Posted by DeadheadNM

I'll take the tie rod. Thanks, Pete

Pete, I'll PM you on shipping.

Quote:

Originally Posted by sdailey

I'll take the brake dust shields as long as they are straight and not damaged.
Your second on the shields. WETOWM is first.

Can I get some better pics?

Your second on the shields. WETOWM is first.

Quote:

Originally Posted by sharpie1972

I'll take the shifter and knob if we can make the split work. Thanks, Sharpie

Dennis if you Gary work it out between yourselfs, Ill ship two differnt ways.

Quote:

Originally Posted by mrdana60

how much shipped for the trans crossmember to 35960. will take it pending price shipped ?

USPS parcel post is 32.55, UPS to a business is 30.00 and 35.00 to a residence.

Thanks to all, Tom

**tll74** · 04-27-2012, 10:14 PM

Quote:

Originally Posted by 4xshort

Hi Tom, Id like to put my name on the a/c vacuum pod bracket. Thanks Josh

Josh, I have sold the complete AC change over locally. I have two other trucks with AC yet to part. I'm not sure which bracket your refuring to. LMK and I'll check.

Quote:

Originally Posted by BuildinA68

Do you have all 4rear spring hangers? If so give me a shipping quote to 24556. Very interested.
Thanks
Posted via Mobile Device

Ryan, I have sold the forward mounts off this truck already to Josh. I have another set on a different 72 so I could do them. 140.00 plus shipping. Tanked and dipped.

Thanks, Tom

teeitup · 04-27-2012, 10:19 PM

Sounds good Tom, I'll be busy around here this coming week anyway, getting ready for a swap meet Fri and Sat. Thanks Randy

BuildinA68 · 04-27-2012, 10:32 PM

I get me a price on shipping, it ok I can wait till next week on the quote. Thanks pending shipping I am still interested in all 4.
Posted via Mobile Device

**DeadheadNM** · 04-27-2012, 10:40 PM

Tom - I think some of the tranny linkage parts may be 4x4 specific - need whatever ya' got as PO removed it all from my K10. Thanks, Pete

**tll74** · 04-27-2012, 11:45 PM

Quote:

Originally Posted by BuildinA68

I get me a price on shipping, it ok I can wait till next week on the quote. Thanks pending shipping I am still interested in all 4.
Posted via Mobile Device

Ryan, 35.64 in shipping.

Quote:

Originally Posted by DeadheadNM

Tom - I think some of the tranny linkage parts may be 4x4 specific - need whatever ya' got as PO removed it all from my K10. Thanks, Pete

Yea your right. Pm sent with shipping cost

**tll74** · 04-27-2012, 11:51 PM

Quote:

Originally Posted by 4xshort

Hi Tom, Id like to put my name on the a/c vacuum pod bracket. Thanks Josh

Josh, are you wanting the bracket that holds the vac reservoir to the outer AC box?

**Gary 70 Jimmy** · 04-28-2012, 12:00 AM

Quote:

Originally Posted by sharpie1972

I'll take the shifter and knob if we can make the split work. Thanks, Sharpie

I will do that if he will ship them seperate. here is my zip 44404

**Gary 70 Jimmy** · 04-28-2012, 12:34 AM

I will wait to see what the stove pipe looks like befor you get shipping on the boot and ring. Gary

VA72C10 · 04-28-2012, 01:35 AM

I'll take the vent windows. Price shipped for both to 23112?

**tll74** · 04-28-2012, 01:47 AM

pics as requested

**tll74** · 04-28-2012, 02:16 AM

More Pics.

4x4 fan shroud. 45.00 sold
3 core radaitor. Looks to be a recore with original Harrison large tanks. Looks very nice. 75.00

04-27-2012, 01:58 AM	#1
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Parting out 72 K10 Parting out a 72 Suburban K10 350, TH350, NP205, and 3.73 gear This thread is for all the parts that are common to both the Pu's, Suburban's, and Blazer's. All prices are plus shipping. All the following parts are hot tanked and dipped. 4x4 trans-tcase cross member. 75.00 Engine cross member. 75.00 this one sold, have 2 more Shock mounts. 12.50 each Rear spring hangers with supports. 35.00 each Front disc brake stone sheilds. 85.00 pair sold 71-early 72 spindle. 50.00 Tie rod with tight ends and straight. 45.00 sold Rear u-bolt plates. pair 25.00 RH axle 71-early 72 needs u-joint. 65.00 LH axle 71-early 72 inner half only. 35.00 T-case support. Mounts to the t-case and RH frame rail. Needs rubbers. 40.00 T-case adapter rubber mounts complete and original. Nice condition. 30.00 sold Front spring shackles. 20.00 Chrome T-case shift stick with knob, boot, ring. nice condition. 110.00 sold LH chrome vent window. Chrome nice, vertical divider rubber bad other rubber driver qaulity. 40.00 sold RH chrome vent window. DQ rubbers, 45.00 More to come. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw Last edited by tll74; 07-07-2012 at 12:41 PM. Reason: post sold on items

04-27-2012, 02:20 AM	#2
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Parting out 72 K10 Will you seperate I just need T-case shifter boot, ring. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

04-27-2012, 04:18 AM	#3
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,711	Re: Parting out 72 K10 Can I please see a close up pic of the chrome on the drivers side vent window.

04-27-2012, 07:23 AM	#4
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,096	Re: Parting out 72 K10 I will take the transfur case adapter plate mounts and the disc brake backing plates as long as the backing plates are nice and not all banged up thanks

04-27-2012, 07:52 AM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out 72 K10 Tom, I'm needing a nice 4 speed shifter knob. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-27-2012, 08:39 AM	#6
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,297	Re: Parting out 72 K10 Any chance you have all the auto tranny linkage parts to the carb? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-27-2012, 08:47 AM	#7
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,297	Re: Parting out 72 K10 I'll take the tie rod. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-27-2012, 10:21 AM	#8
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: Parting out 72 K10 I'll take the brake dust shields as long as they are straight and not damaged. Can I get some better pics? __________________ Shannon

04-27-2012, 03:02 PM	#10
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: Parting out 72 K10 how much shipped for the trans crossmember to 35960. will take it pending price shipped ?

04-27-2012, 06:27 PM	#11
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 K10 I'll get back to all in a couple hours. Thanks __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

04-27-2012, 09:26 PM	#12
4xshort Registered User Join Date: Jan 2012 Location: Waseca Saskatchewan, Canada Posts: 276	Re: Parting out 72 K10 Hi Tom, Id like to put my name on the a/c vacuum pod bracket. Thanks Josh __________________ 1971 Chevy shortbox 4x4 made in Canada

04-27-2012, 09:59 PM	#13
BuildinA68 Registered User Join Date: Mar 2011 Location: Goode, VA Posts: 159	Re: Parting out 72 K10 Do you have all 4rear spring hangers? If so give me a shipping quote to 24556. Very interested. Thanks Posted via Mobile Device __________________ Ryan

04-27-2012, 10:19 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out 72 K10 Sounds good Tom, I'll be busy around here this coming week anyway, getting ready for a swap meet Fri and Sat. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-27-2012, 10:32 PM	#17
BuildinA68 Registered User Join Date: Mar 2011 Location: Goode, VA Posts: 159	Re: Parting out 72 K10 I get me a price on shipping, it ok I can wait till next week on the quote. Thanks pending shipping I am still interested in all 4. Posted via Mobile Device __________________ Ryan

04-27-2012, 10:40 PM	#18
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,297	Re: Parting out 72 K10 Tom - I think some of the tranny linkage parts may be 4x4 specific - need whatever ya' got as PO removed it all from my K10. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

04-28-2012, 12:34 AM	#22
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Parting out 72 K10 I will wait to see what the stove pipe looks like befor you get shipping on the boot and ring. Gary __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

04-28-2012, 01:35 AM	#23
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Parting out 72 K10 I'll take the vent windows. Price shipped for both to 23112? __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-28-2012, 01:47 AM	#24
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 K10 pics as requested Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

04-28-2012, 02:16 AM	#25
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 K10 More Pics. 4x4 fan shroud. 45.00 sold 3 core radaitor. Looks to be a recore with original Harrison large tanks. Looks very nice. 75.00 Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw Last edited by tll74; 05-07-2012 at 02:01 AM.

Register or Log In To remove these advertisements.