Stuck 3rd member .. any ideas? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chillware · 08-07-2009, 12:49 PM

So I'm tearing down my rear end for a rebuild and I can't get the 3rd member out..

It's a 12 bolt out of my '66 C10. I've got the main caps off, I pulled the large pin out that goes through the spider gears. That literally took me an hour of hammering to get out because it was worn/swelled/locked/rusted in there.

The axles are also out..

I just can't get the third member to budge.. do i just need to get a bigger pry bar and some more muscle behind it?

I can tell that moisture has been in there before, there is a good amount of pitting on the teeth of the ring gear.

Am I missing something else that's holding it in? I don't see any thing else that could be other that it could be rusted in to place..

Thanks for your help!

*ImportThis* · 08-07-2009, 01:15 PM

git a LONG pry bar, and ideally someone else to hold the third member, and pry on it. some rear ends i do, it takes me and my boss both with 4 ft. prybars to pry a carrier out. if the carrier has the holes on the sides, bout 1" round, pry one side and then the other. Hope this helps

daverod · 08-07-2009, 02:55 PM

So this is one of those times you don't need a bigger hammer?

mike73 · 08-07-2009, 04:51 PM

Its one of those He-Man Butcher things. They have case spreadders for those tough ones. All the ones Ive ever messed with just fell out.

**Captainfab** · 08-08-2009, 12:09 AM

Yeah sometimes they are stuck in there pretty good, Like was already posted, a good pry bar and another person is a good idea. Someone to catch the carrier and help and try and keep track of which shims came from what side.

chillware · 08-08-2009, 12:31 AM

Got it out! I went to Harbor Freight and got a nice long pry bar for $6 .. me and a buddy pry'd it right out, no problems..

Thanks!

duallyjams · 08-08-2009, 07:33 AM

Any time you can find a reason to buy tools is a good thing.

daverod · 08-08-2009, 09:09 AM

Quote:

Originally Posted by chillware

Got it out! I went to Harbor Freight and got a nice long pry bar for $6 .. me and a buddy pry'd it right out, no problems..

Thanks!

Way to go.

I love hf. Went there the other day got a $30 creeper board for $15.

08-07-2009, 12:49 PM	#1
chillware Registered User Join Date: Jun 2009 Location: Roseville, CA Posts: 246	Stuck 3rd member .. any ideas? So I'm tearing down my rear end for a rebuild and I can't get the 3rd member out.. It's a 12 bolt out of my '66 C10. I've got the main caps off, I pulled the large pin out that goes through the spider gears. That literally took me an hour of hammering to get out because it was worn/swelled/locked/rusted in there. The axles are also out.. I just can't get the third member to budge.. do i just need to get a bigger pry bar and some more muscle behind it? I can tell that moisture has been in there before, there is a good amount of pitting on the teeth of the ring gear. Am I missing something else that's holding it in? I don't see any thing else that could be other that it could be rusted in to place.. Thanks for your help!

08-07-2009, 01:15 PM	#2
ImportThis Account Suspended Join Date: Aug 2009 Location: Paris, Tx Posts: 16	Re: Stuck 3rd member .. any ideas? git a LONG pry bar, and ideally someone else to hold the third member, and pry on it. some rear ends i do, it takes me and my boss both with 4 ft. prybars to pry a carrier out. if the carrier has the holes on the sides, bout 1" round, pry one side and then the other. Hope this helps

08-07-2009, 02:55 PM	#3
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Stuck 3rd member .. any ideas? So this is one of those times you don't need a bigger hammer? __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 08-07-2009 at 02:55 PM.

08-07-2009, 04:51 PM	#4
mike73 Registered User Join Date: Jul 2009 Location: Los Lunas NewMexico Posts: 60	Re: Stuck 3rd member .. any ideas? Its one of those He-Man Butcher things. They have case spreadders for those tough ones. All the ones Ive ever messed with just fell out.

08-08-2009, 12:09 AM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Stuck 3rd member .. any ideas? Yeah sometimes they are stuck in there pretty good, Like was already posted, a good pry bar and another person is a good idea. Someone to catch the carrier and help and try and keep track of which shims came from what side. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-08-2009, 12:31 AM	#6
chillware Registered User Join Date: Jun 2009 Location: Roseville, CA Posts: 246	Re: Stuck 3rd member .. any ideas? Got it out! I went to Harbor Freight and got a nice long pry bar for $6 .. me and a buddy pry'd it right out, no problems.. Thanks!

08-08-2009, 07:33 AM	#7
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Stuck 3rd member .. any ideas? Any time you can find a reason to buy tools is a good thing. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.