AZ Billet Aluminum Radio Plate - Production Run #2 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

yellowGT · 06-30-2013, 06:36 PM

Ok just wanted to make sure that I was in the loop. I'm looking forward for it.
Posted via Mobile Device

mahanian · 07-08-2013, 03:54 PM

Just an update, my polisher went on vacation for the 4th and didn't tell me so a little bit of a delay, I will post in the thread when I have them in hand. Thanks for the patience!

knomadd · 07-08-2013, 03:55 PM

Thanks for the update!

rickairbound1 · 07-14-2013, 06:57 PM

I purchased one from your last run but have yet to receive it. Are they close to being shipped?

Thanks, Rick

mahanian · 07-14-2013, 07:54 PM

Quote:

Originally Posted by rickairbound1

I purchased one from your last run but have yet to receive it. Are they close to being shipped?

Thanks, Rick

What are you talking about?? You purchased in this thread for this run, look at page 2 for your posts asking how to pay with paypal. As I told you last week when you PM'd me, I'm waiting on the polisher, it is out of my hands. I called him on Friday and he said they should be done by Wednesday. The last batch took 2 weeks at the polisher so I assumed the same this time but he has been really backed up.

AMD6769 · 07-15-2013, 01:48 AM

Hi are there any more available? please let me know

rickairbound1 · 07-15-2013, 07:13 PM

Hey! My bad. I thought I saw a new post from you looking to run another 20 plates once you had 20 buyers but the first 20 had not received theirs yet.

Trying to be patient.

mahanian · 07-16-2013, 03:39 PM

Quote:

Originally Posted by AMD6769

Hi are there any more available? please let me know

I have a couple left

Quote:

Originally Posted by rickairbound1

Hey! My bad. I thought I saw a new post from you looking to run another 20 plates once you had 20 buyers but the first 20 had not received theirs yet.

Trying to be patient.

Nope, I think this will be my last batch for awhile

gotchamel · 07-16-2013, 04:51 PM

Still available?I will take a polished if so.

mahanian · 07-16-2013, 05:41 PM

Yes, I still have a couple left

Cole Trickle · 07-16-2013, 05:56 PM

done.....

just sent the $$$

Thanks....I have been wanting one of these for a while just never got around to buying and thought you were gone

gotchamel · 07-16-2013, 06:38 PM

Quote:

Originally Posted by mahanian

Yes, I still have a couple left

I will take 1.Can you please pm me payment info other than paypal.Thanks,Mel

Oxmarqt · 07-16-2013, 07:06 PM

Just sent the payment through Paypal. Thank you.

**RPIcka** · 07-16-2013, 11:28 PM

Did mine ship out?

AMD6769 · 07-17-2013, 12:50 AM

I will take 1 and payment sent thanks

gotchamel · 07-17-2013, 04:43 PM

Quote:

Originally Posted by gotchamel

I will take 1.Can you please pm me payment info other than paypal.Thanks,Mel

Am I in on this?Thanks.

chevyguy_72 · 07-24-2013, 01:03 PM

Any update on shipping this batch?
Thanks

mahanian · 07-25-2013, 09:04 PM

I FINALLY picked them up from the polisher, it took him twice as long as he quoted. He does a great job but he is as bad as most body shops about quoting completion times.

I will start shipping them out as fast as I can, I appreciate all of you that didn't bug me about when they would be done after I requested your patience.

Please DO NOT send me a message asking when yours will ship, I will send each of you a PM as they ship. I have to clean the polish off of each of them and touch them up as needed with polish, I only get through 3-4 a day.

Thanks again for the patience, you won't be disappointed!

muckmuck · 07-25-2013, 09:25 PM

Great thanks for the update! Looking forward to it!
Posted via Mobile Device

**nlped** · 07-26-2013, 09:12 PM

I sent payment via Paypal

gotchamel · 07-26-2013, 09:17 PM

1 more time,am I in?
Posted via Mobile Device

RideSF · 07-27-2013, 01:47 AM

You got any left polished? If so ill take one, thanks.
Posted via Mobile Device

2x4 · 07-27-2013, 02:22 AM

ill take a polished one if you have one left thanks

dapperg · 07-27-2013, 09:02 AM

Excited to get one of these beauties! I need some tunes in the ol' girl

yellowGT · 07-29-2013, 01:48 AM

X2 here. Tired of humming and tapping on the steering wheel lol.

06-30-2013, 06:36 PM	#76
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Billet Aluminum Radio Plate - Production Run #2 Ok just wanted to make sure that I was in the loop. I'm looking forward for it. Posted via Mobile Device __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

07-08-2013, 03:54 PM	#77
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Production Run #2 Just an update, my polisher went on vacation for the 4th and didn't tell me so a little bit of a delay, I will post in the thread when I have them in hand. Thanks for the patience! __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

07-08-2013, 03:55 PM	#78
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Billet Aluminum Radio Plate - Production Run #2 Thanks for the update! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

07-14-2013, 06:57 PM	#79
rickairbound1 Registered User Join Date: Aug 2011 Location: San Antonio, TX Posts: 88	Re: Billet Aluminum Radio Plate - Production Run #2 I purchased one from your last run but have yet to receive it. Are they close to being shipped? Thanks, Rick

07-15-2013, 01:48 AM	#81
AMD6769 Registered User Join Date: Nov 2006 Location: OAKLAND CALI Posts: 61	Re: Billet Aluminum Radio Plate - Production Run #2 Hi are there any more available? please let me know

07-15-2013, 07:13 PM	#82
rickairbound1 Registered User Join Date: Aug 2011 Location: San Antonio, TX Posts: 88	Re: Billet Aluminum Radio Plate - Production Run #2 Hey! My bad. I thought I saw a new post from you looking to run another 20 plates once you had 20 buyers but the first 20 had not received theirs yet. Trying to be patient.

07-16-2013, 04:51 PM	#84
gotchamel Registered User Join Date: Feb 2011 Location: islamorada fl. Posts: 466	Re: Billet Aluminum Radio Plate - Production Run #2 Still available?I will take a polished if so.

07-16-2013, 05:41 PM	#85
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Production Run #2 Yes, I still have a couple left __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

07-16-2013, 05:56 PM	#86
Cole Trickle C-10 Club Member Join Date: Mar 2010 Location: Corona,CA Posts: 1,001	Re: Billet Aluminum Radio Plate - Production Run #2 done..... just sent the $$$ Thanks....I have been wanting one of these for a while just never got around to buying and thought you were gone __________________ 1969 Short Fleet 350/SM465 4.5/6.5 ECE drop 20" Raceline Wheels 1998 2dr Tahoe 5/7 drop 20"/22" Coys-sold Build thread...http://67-72chevytrucks.com/vboard/s...d.php?t=401910

07-16-2013, 07:06 PM	#88
Oxmarqt Registered User Join Date: Jul 2013 Location: Hilliard, Ohio Posts: 22	Re: Billet Aluminum Radio Plate - Production Run #2 Just sent the payment through Paypal. Thank you.

07-16-2013, 11:28 PM	#89
RPIcka Senior Member Join Date: Aug 2011 Location: Powell River, BC Posts: 229	Re: Billet Aluminum Radio Plate - Production Run #2 Did mine ship out? __________________ '72 K10 '94 K2500

07-17-2013, 12:50 AM	#90
AMD6769 Registered User Join Date: Nov 2006 Location: OAKLAND CALI Posts: 61	Re: Billet Aluminum Radio Plate - Production Run #2 I will take 1 and payment sent thanks

07-24-2013, 01:03 PM	#92
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: Billet Aluminum Radio Plate - Production Run #2 Any update on shipping this batch? Thanks

07-25-2013, 09:04 PM	#93
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Production Run #2 I FINALLY picked them up from the polisher, it took him twice as long as he quoted. He does a great job but he is as bad as most body shops about quoting completion times. I will start shipping them out as fast as I can, I appreciate all of you that didn't bug me about when they would be done after I requested your patience. Please DO NOT send me a message asking when yours will ship, I will send each of you a PM as they ship. I have to clean the polish off of each of them and touch them up as needed with polish, I only get through 3-4 a day. Thanks again for the patience, you won't be disappointed! __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

07-25-2013, 09:25 PM	#94
muckmuck Junior Member Join Date: Apr 2005 Location: Henderson, NV Posts: 329	Re: Billet Aluminum Radio Plate - Production Run #2 Great thanks for the update! Looking forward to it! Posted via Mobile Device



Register or Log In To remove these advertisements.

07-26-2013, 09:12 PM	#95
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: Billet Aluminum Radio Plate - Production Run #2 I sent payment via Paypal __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha Last edited by nlped; 07-26-2013 at 09:24 PM.

07-26-2013, 09:17 PM	#96
gotchamel Registered User Join Date: Feb 2011 Location: islamorada fl. Posts: 466	Re: Billet Aluminum Radio Plate - Production Run #2 1 more time,am I in? Posted via Mobile Device

07-27-2013, 01:47 AM	#97
RideSF Registered User Join Date: Apr 2012 Location: San Francisco ca Posts: 224	Re: Billet Aluminum Radio Plate - Production Run #2 You got any left polished? If so ill take one, thanks. Posted via Mobile Device

07-27-2013, 02:22 AM	#98
2x4 Registered User Join Date: Jan 2013 Location: Surrey Canada Posts: 3	Re: Billet Aluminum Radio Plate - Production Run #2 ill take a polished one if you have one left thanks __________________ To get something you've never had you'll have to do something you've never done

07-27-2013, 09:02 AM	#99
dapperg Registered User Join Date: Feb 2013 Location: Atlanta, GA Posts: 84	Re: Billet Aluminum Radio Plate - Production Run #2 Excited to get one of these beauties! I need some tunes in the ol' girl __________________ . . . . . . . . . ________ . . . . . . __________///____ //_____ /____ 72’ __/_____ /_ ___/ ===( o )=======( o ) . . . . . . . . . . . . . . . . . . . . . . 72' Chevy C10 Super Fleetside Longbed "Speak softly & carry a big pistol."

07-29-2013, 01:48 AM	#100
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Billet Aluminum Radio Plate - Production Run #2 X2 here. Tired of humming and tapping on the steering wheel lol. __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

Register or Log In To remove these advertisements.