Fender/Rad support/inner fender bolts?

[LoudLowNslow]

Hey guys, where can I buy all of the bolts that hold the front clip together? Started piecing the 66 gmc that was left for me back together. Only bolts I have are the ones that bolt the hood on. I need ALL of the bolts that hold the fenders on, rad support, inner fenders, grille and front bumper. Any ideas as to where I can get all of these? Thanks guys -Paul
Posted via Mobile Device

[62 Barnfind]

I have been using bolts from Lowes. The origional bolts are rusted and dirty and I didn't want to use them again. I guess it depends if you wat to look origional or not.

[k1rodeoboater]

Tractor supply co. is cheaper than lowes and home depot
Posted via Mobile Device

[LoudLowNslow]

How do I k ow what size I need for all of them? I have NO idea and need to get this front clip back together!
Posted via Mobile Device

[k1rodeoboater]

you don't have any of the bolts? I just took one with me to the store. i'm sure someoen will be by before me, but I can tell you in the morning if I get up early enough.

[perro13]

i might have set for both fenders in nice shape.

[tincan1966]

Just about everything holding the fenderwells to fenders and header to radiator support are all 5/16NC X 3/4"L probably about 20-24 of them, with the exception of the fender to cowl bolts(3/8 NF X 1"L - you'll need 4 of these) and the front fender to radiator support bolt that goes into the end of the support at the top of fender it is also 3/8 NF X 1"L( 2 of these). I am not 100% positive that is all, but that will get most of them.
Alot of places like LMC and Brothers sell bolt kits if you want original.

Hope that helps

[tincan1966]

BTW we have a farm store here that sells all their bolts by the pound-so we just grab a couple handfuls everytime we go.

[LowDown]

If you want the good stuff !



http://www.gardner-westcott.com/