GA parting out 79 K-10

[roundhouse]

Originally Posted by old Rusty C10

One more thing I will need if its good Please give m a price for the interior hood release cable and handle assembly.. the more I think about this the more I need lol I will also take the pedal assembly as I need another part from it so I might as well buy the whole thing I need the bracket that activates the brake lights

OK will check to see if the cable is in it,

[UKNOWME]

Still raining?

[roundhouse]

Originally Posted by UKNOWME

Can I see a pic of the guage cluster?

needles and gauge faces look good
think the clear cover will clean up,
but its kinda foggy
I will pull it off and wash it and see if the fog washes off

[roundhouse]

Originally Posted by Willowrun

How are the interior door panels?

,,

[Chaplain]

I know willowrun asked about the door panels. I willing if they are not going to willowrun.

[Chaplain]

I'm willing...(typo)

[liftlawssuck]

How much do you want for the back window shipped to 01543? Any pics of the tracks on the inside? Thanks

[Sodak]

what shape are the sun visors in? and is it a single tank or dual..need some skid plates for my dual tank setup.

[roundhouse]

Originally Posted by Sodak

what shape are the sun visors in? and is it a single tank or dual..need some skid plates for my dual tank setup.

visors are in excellent condition

single tank on passenger side.

you need part of an old tank to make a skid plate?

[roundhouse]

Originally Posted by liftlawssuck

How much do you want for the back window shipped to 01543? Any pics of the tracks on the inside? Thanks

$40 plus postage,

look closely, you can see its missing 3 of the 4 aluminum vertical pieces,

might not be worth fooling with, but Ive had several people ask about a factory bare aluminum one,
apparently all the ones avail to purchase now are black aluminum

I dont know if this one is factory or not

I have one in my sons 77 stepside, that came out of a 82 that my uncle bought new, and it looks very different from this one.

it has a 1/2 inch extension on the inside and all the glass sticks out twards the outside.

[roundhouse]

Originally Posted by old Rusty C10

One more thing I will need if its good Please give m a price for the interior hood release cable and handle assembly.. the more I think about this the more I need lol I will also take the pedal assembly as I need another part from it so I might as well buy the whole thing I need the bracket that activates the brake lights

looks like this truck never had a cable

I should have bought a parts truck last year,

we just swapped in a NV 3500 5 speed from a 2006 Silverado into the 77 stepside and converted the clutch to hydrualic, and the clutch pedal pivot was so worn out and egg shaped that it couldnt be reused, so we wound up finding a brake pedal, which is a mirror image of the clutch pedal at the top pivot, and cutting the lower 1/3 off, flipping it over, and bolting the bottom half of the old clutch pedal to it,

this worked out fine and I wish I had put some more thought into it and made the pedal adjustable between the 2 sections, so I could adjust the pedal height , which we did, but only by drilling a new hole,

[dfrank]

Has the dash been cut out for an aftermarket radio? I want to put a factory radio in my truck and I need a patch panel to weld into my dash where the radio goes. If you could cut that section out of the dash for me that would be great.

[roundhouse]

Originally Posted by dfrank

Has the dash been cut out for an aftermarket radio? I want to put a factory radio in my truck and I need a patch panel to weld into my dash where the radio goes. If you could cut that section out of the dash for me that would be great.

sadly alreeady been hacked up
see post below

[roundhouse]

Originally Posted by old Rusty C10

I need all the springs from the clutch linkage on the bottom and the two springs that are under the dash board for the clutch pedal return. Also if the on air conditioning selector switch is good give e a price for that too all is shipped to 07731

A/C controls are still there,

[Willowrun]

Originally Posted by roundhouse

,,

They look decent enough. Could you please give me a price?
Thanks!

[Sodak]

Originally Posted by roundhouse

visors are in excellent condition

single tank on passenger side.

you need part of an old tank to make a skid plate?

How much for the Visors to 57732 and PM me your info please.

Some truck with dual tanks come with a steel skidplate on the bottom. hard to find ,was just cheking if your had them.
Thanks anyway.

[JIMs70GMC]

Originally Posted by roundhouse

its from a fixed yoke tcase, so yes it has the slip in the shaft,
but shipping that far is gonna be $$

I have 2 of em in fact

Since I'm using it on a K5 I will still need to have it cut down. If only you were closer..... Thanks,

Jim

[dfrank]

Originally Posted by roundhouse

sadly alreeady been hacked up
see post below

Bummer, thanks for checking.

[liftlawssuck]

Originally Posted by roundhouse

$40 plus postage,

look closely, you can see its missing 3 of the 4 aluminum vertical pieces,

might not be worth fooling with, but Ive had several people ask about a factory bare aluminum one,
apparently all the ones avail to purchase now are black aluminum

I dont know if this one is factory or not

I have one in my sons 77 stepside, that came out of a 82 that my uncle bought new, and it looks very different from this one.

it has a 1/2 inch extension on the inside and all the glass sticks out twards the outside.

It looks original to me. Looks just like mine. I'm not worried about the division bars not being there. What are the felt runners like where the sliding glass rides in? Thanks for your time.

[roundhouse]

Originally Posted by JIMs70GMC

Since I'm using it on a K5 I will still need to have it cut down. If only you were closer..... Thanks,

Jim

I will check on the postage

[UKNOWME]

Originally Posted by roundhouse

needles and gauge faces look good
think the clear cover will clean up,
but its kinda foggy
I will pull it off and wash it and see if the fog washes off

Ok thanks.
Is the guage bezel in decent shape? Looks to be by the pic

[gmclowsierra]

what fan shroud does it have?

[roundhouse]

Originally Posted by UKNOWME

Ok thanks.
Is the guage bezel in decent shape? Looks to be by the pic

top left corner is broken off

[roundhouse]

will get shipping quotes as soon as I can,
think Ive replied to all the PMs,

I have a regular 40 hr job, and its another rainy night in Georgia

I will get your parts out soon as I can.

Honestly I didnt expect as many responses,
figured most of this rig besides the axles and Tcase was going to the crusher,

even got someone that wants the back cab wall and back end of the bed and tailgate

I just wish Id bought a parts truck last year,
before I bought a new wiper motor & switch, new speedo cable, another gauge cluster, new door hinges, new window regulators, new clutch pedal assembly, new sliding back window, used drive shafts, used door panels and dash, new spindles and lockouts, etc etc

live and learn.

[roundhouse]

Originally Posted by gmclowsierra

what fan shroud does it have?

missing