Parting a 67 no rust AZ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 03-11-2009, 02:00 AM

Parting out this 67 big window 3/4 ton, one of the best rust free 67's I've had. Cab & doors SOLD!
cab & doors SOLD , cab is a low hump air cab, & does not need rust repair, doors have small 4" holes cut at the front inside of the doors, chrome wing windows in good shape.
Front clip is (SOLD)

Longbed steel floor straight & solid, good floor no major dents New price $350

Gmc tailgate $200 straight on the outside, some dents on the inside(SOLD)

Also has a 71/72 disk brake front end all clean & nice, $150 ,frame in engine compartment all clean also

Parting this whole truck, It does have a title & was a 327 SOLD, turbo 400 truck, have original engine, not sure of its condition.

If you see something your interested in let me know & I'll price it, selling the clip complete for now. this truck & parts are also for sale locally.
Thanks,
Tom 480-241-1318

nds1968 · 03-11-2009, 05:48 AM

What gauge cluster does it have. A 7 hole with choke and painted silver bezel? Pics and shipping to 15227.

**bigdon-70blazer** · 03-11-2009, 07:35 AM

How about those hub caps that fit the clips?

my67chevytruck · 03-11-2009, 07:37 AM

What shape is the wiring harness in? cig lighter?

**Gary 70 Jimmy** · 03-11-2009, 09:06 AM

Does it have the costom horn buttom if so how much.

lukediesel · 03-11-2009, 10:05 AM

I am interested in the rear leaf springs if it has them. I am located in Ohio but am willing to pay any shipping.

Just let me know.

-LD

Chevy_Man · 03-11-2009, 10:08 AM

I am interested in the vent windows and the grill trim rings....and light bezels

**special-K** · 03-11-2009, 10:13 AM

If the cab & doors end up going seperate,I`m interested in the wing vents,too.Or,if someone just doesn`t want the glass and latches,that`s what I really need.I`d buy the cab if I could get someone to haul it cheap enough.

**michael bustamante** · 03-11-2009, 11:29 AM

howmuch for the driver vent window shipped to NM 87121?

**t korinek** · 03-11-2009, 12:58 PM

I'll check on these parts & post shipping, pics & condition later today.
I am trying to sell the doors complete with the cab for now, if that doesn't work will part them.
Thanks,
Tom

70rs/ss · 03-11-2009, 01:08 PM

Tom,

How about the clip?? I'd like 68 fenders, but I can fill the bed marker lights? Any need for a 72 clip, maybe a trade?? MLMK??

**Hart_Rod** · 03-11-2009, 03:41 PM

What damage does the front clip have other than the bondo filling the holes?

R/

STOCKISH · 03-11-2009, 03:48 PM

Man you guys have it made out west. Those are some great looking parts, I wish I was closer I would love to have that whole truck.

**t korinek** · 03-11-2009, 04:48 PM

70ss/rs, Can't do a trade on the front clip, remember I still have a 68 front clip
Hart_ no damage other than the bondo work & starting to grind those areas, maybe a little something at the front of the hood driver side, this is a nice clip.
72super, I wish you were out here too, I'd like to send it home with you.

joemacho · 03-11-2009, 07:17 PM

hey tom how much for the windshield trim and custom emblems

my67chevytruck · 03-11-2009, 07:46 PM

is the buddy buckets, the blue ones you have listed in another post?

**t korinek** · 03-12-2009, 12:16 AM

nds1968, dash bezel is a new aftermarket, its not the one with the choke hole.
Bigdon, I only have 3 of the hubcaps, $10 each

my67chevytruck under dash wiring harness in that one is cut up, I have another out of an air cab in nice shape for $60, if you were looking for the dash harness?
lighter is missing

Gary 70 jimmy chrome in nice shape on horn button, weird pattern under the plastic like there was water under it at one time.(see pic) $20 shipped

luke deisel this truck is coil spring, a 72 I'm parting out has leaf springs I'll sell for $25 each

Joemacho $30 for the trim, its nice & $10 for both the custom emblems

my67chevytruck, yes same buddy buckets that are posted seperately

**t korinek** · 03-12-2009, 12:17 AM

forgot the pic

**Gary 70 Jimmy** · 03-12-2009, 08:09 AM

I will take the horn button pm sent

my67chevytruck · 03-12-2009, 09:39 AM

Quote:

Originally Posted by t korinek

my67chevytruck under dash wiring harness in that one is cut up, I have another out of an air cab in nice shape for $60, if you were looking for the dash harness?
lighter is missing

Tom ,

Will the wiring harness work for an automatic? Is the dash harness referring to everything inside the cab? fuse holder etc. that is what i need as the PO hacked it up pretty good.

Also forgot to ask what condition the igniton bezel and switch is in, and if its a matched set to the doors?

**Hart_Rod** · 03-12-2009, 10:22 AM

Quote:

Originally Posted by t korinek

70ss/rs, Can't do a trade on the front clip, remember I still have a 68 front clip
Hart_ no damage other than the bondo work & starting to grind those areas, maybe a little something at the front of the hood driver side, this is a nice clip.
72super, I wish you were out here too, I'd like to send it home with you.

If you haven't sold the clip by the time the family and I take our trip at the end of the month, maybe we can work something out.

R/

70rs/ss · 03-12-2009, 12:44 PM

Tom can I see picts of the 68 clip? I am headed your way 3/30 so I can maybe pick one or the other up when I get down there?

jorgensensc · 03-12-2009, 02:17 PM

If you decide to split off the front grill trim rigs and they are in good condition shoot me a price.
Shawn

DREAMS OF A 67 · 03-12-2009, 05:24 PM

I would be interested in the doors,if you seperate.

**michael bustamante** · 03-12-2009, 05:42 PM

if you do decide to part out the doors I am really interested in the vent windows, just let me know

03-11-2009, 02:00 AM	#1
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Parting a 67 no rust AZ Parting out this 67 big window 3/4 ton, one of the best rust free 67's I've had. Cab & doors SOLD! cab & doors SOLD , cab is a low hump air cab, & does not need rust repair, doors have small 4" holes cut at the front inside of the doors, chrome wing windows in good shape. Front clip is (SOLD) Longbed steel floor straight & solid, good floor no major dents New price $350 Gmc tailgate $200 straight on the outside, some dents on the inside(SOLD) Also has a 71/72 disk brake front end all clean & nice, $150 ,frame in engine compartment all clean also Parting this whole truck, It does have a title & was a 327 SOLD, turbo 400 truck, have original engine, not sure of its condition. If you see something your interested in let me know & I'll price it, selling the clip complete for now. this truck & parts are also for sale locally. Thanks, Tom 480-241-1318 Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 07-09-2009 at 11:47 PM. Reason: Sold parts

03-11-2009, 05:48 AM	#2
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Parting a 67 no rust AZ What gauge cluster does it have. A 7 hole with choke and painted silver bezel? Pics and shipping to 15227. __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

03-11-2009, 07:35 AM	#3
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,501	Re: Parting a 67 no rust AZ How about those hub caps that fit the clips?

03-11-2009, 07:37 AM	#4
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Parting a 67 no rust AZ What shape is the wiring harness in? cig lighter? __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 03-11-2009 at 10:25 AM.

03-11-2009, 09:06 AM	#5
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Parting a 67 no rust AZ Does it have the costom horn buttom if so how much. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

03-11-2009, 10:05 AM	#6
lukediesel Registered User Join Date: Oct 2008 Location: Cincinnati, OH Posts: 5	Re: Parting a 67 no rust AZ I am interested in the rear leaf springs if it has them. I am located in Ohio but am willing to pay any shipping. Just let me know. -LD

03-11-2009, 10:08 AM	#7
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: Parting a 67 no rust AZ I am interested in the vent windows and the grill trim rings....and light bezels __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons

03-11-2009, 10:13 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Parting a 67 no rust AZ If the cab & doors end up going seperate,I`m interested in the wing vents,too.Or,if someone just doesn`t want the glass and latches,that`s what I really need.I`d buy the cab if I could get someone to haul it cheap enough. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-11-2009, 11:29 AM	#9
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,836	Re: Parting a 67 no rust AZ howmuch for the driver vent window shipped to NM 87121? __________________ 1967custom

03-11-2009, 12:58 PM	#10
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ I'll check on these parts & post shipping, pics & condition later today. I am trying to sell the doors complete with the cab for now, if that doesn't work will part them. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-11-2009, 01:08 PM	#11
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Parting a 67 no rust AZ Tom, How about the clip?? I'd like 68 fenders, but I can fill the bed marker lights? Any need for a 72 clip, maybe a trade?? MLMK??

03-11-2009, 03:41 PM	#12
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: Parting a 67 no rust AZ What damage does the front clip have other than the bondo filling the holes? R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-11-2009, 03:48 PM	#13
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting a 67 no rust AZ Man you guys have it made out west. Those are some great looking parts, I wish I was closer I would love to have that whole truck. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-11-2009, 04:48 PM	#14
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ 70ss/rs, Can't do a trade on the front clip, remember I still have a 68 front clip Hart_ no damage other than the bondo work & starting to grind those areas, maybe a little something at the front of the hood driver side, this is a nice clip. 72super, I wish you were out here too, I'd like to send it home with you. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-11-2009, 07:17 PM	#15
joemacho Registered User Join Date: Aug 2007 Location: peoria az Posts: 252	Re: Parting a 67 no rust AZ hey tom how much for the windshield trim and custom emblems



Register or Log In To remove these advertisements.

03-11-2009, 07:46 PM	#16
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Parting a 67 no rust AZ is the buddy buckets, the blue ones you have listed in another post? __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-12-2009, 12:16 AM	#17
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ nds1968, dash bezel is a new aftermarket, its not the one with the choke hole. Bigdon, I only have 3 of the hubcaps, $10 each my67chevytruck under dash wiring harness in that one is cut up, I have another out of an air cab in nice shape for $60, if you were looking for the dash harness? lighter is missing Gary 70 jimmy chrome in nice shape on horn button, weird pattern under the plastic like there was water under it at one time.(see pic) $20 shipped luke deisel this truck is coil spring, a 72 I'm parting out has leaf springs I'll sell for $25 each Joemacho $30 for the trim, its nice & $10 for both the custom emblems my67chevytruck, yes same buddy buckets that are posted seperately __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-12-2009, 12:17 AM	#18
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ forgot the pic Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-12-2009, 08:09 AM	#19
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Parting a 67 no rust AZ I will take the horn button pm sent __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

03-12-2009, 12:44 PM	#22
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Parting a 67 no rust AZ Tom can I see picts of the 68 clip? I am headed your way 3/30 so I can maybe pick one or the other up when I get down there?

03-12-2009, 02:17 PM	#23
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Parting a 67 no rust AZ If you decide to split off the front grill trim rigs and they are in good condition shoot me a price. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

03-12-2009, 05:24 PM	#24
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: Parting a 67 no rust AZ I would be interested in the doors,if you seperate. __________________ Joe

03-12-2009, 05:42 PM	#25
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,836	Re: Parting a 67 no rust AZ if you do decide to part out the doors I am really interested in the vent windows, just let me know __________________ 1967custom

Register or Log In To remove these advertisements.