MI ****Part Out 72 C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DaHos** · 02-23-2016, 08:25 PM

Shes a crispy one but still some salvageable parts. Originally a Big Block truck. I will be pulling it down more this week and have better idea of condition of parts. Here are a few to start it off.......

PayPal or USPS money orders please......all prices are plus shipping.

Black Visors $20
4spd High hump tunnel $45
Gauge Cluster $20
Interior heater tins (3) $25
Sway Bar $50

etc...

**DaHos** · 02-23-2016, 08:32 PM

Highlander Bench, good frame and foam. $150 (local only)
SBC Fan Shroud $50
Blue seat belts, no boots on retractors. Overall nice w cleaning (I have another good GM button Ill include) $40
Steering wheel $30
Brake booster Bracket kit 3/4-1 ton all 4 pieces (or Ill ship the entire unit) $75

FlameOut · 02-23-2016, 09:01 PM

I'll take the visors as long as no tears. Can you send me better pics? flameout@gmail.com

bronze 72 super · 02-23-2016, 09:15 PM

How much for the steering wheel? Yes I know what it is!! Shipping to 97050.

best view · 02-23-2016, 10:01 PM

does it have the dual tank medal strip on floor telling witch tank your on if so ill take it ken

**Razorbacker** · 02-23-2016, 10:01 PM

Does the truck have dual horns? If so, I would be interested in the high note horn if it works.

Thx,

Longhornss · 02-23-2016, 10:03 PM

Interested in the hump. Any pictures of the underside?

Tumbleweed1C4 · 02-23-2016, 10:25 PM

Dave, I will get in line for the hubcaps. My cab tank was removed and I am running only aux tank. Would be interested in cab tank and whatever hardware is used to interconnect to aux tank along with dash wiring behind gauge selector switch.

**Cash3481** · 02-23-2016, 10:25 PM

Dave,
How are those hub caps?
I could use 2-3 decent drivers if it has a couple.
Mike

**DaHos** · 02-23-2016, 10:28 PM

Quote:

Originally Posted by jaybatta

How much for hubcaps, grill bowtie and headliner shipped to 59847? Is the fuel gauge selector a knob or switch? Does it have an aux tank in the bedside or are they saddle tanks?

Thanks,
Joe

Caps are NFS at this time, Ill verify condition of Bowtie and there is no headliner. Selector switch is just a toggle. Bed has been changed no dual tank items.

Quote:

Originally Posted by FlameOut

I'll take the visors as long as no tears. Can you send me better pics? flameout@gmail.com

I will pull in am and send you pics.

Quote:

Originally Posted by bronze 72 super

How much for the steering wheel? Yes I know what it is!! Shipping to 97050.

$48 shipped

Quote:

Originally Posted by best view

does it have the dual tank medal strip on floor telling witch tank your on if so ill take it ken

Sorry it does not

Quote:

Originally Posted by Razorbacker

Does the truck have dual horns? If so, I would be interested in the high note horn if it works.

Thx,

Does not but I believe I have a few, let me check in the am.

Quote:

Originally Posted by Longhornss

Interested in the hump. Any pictures of the underside?

Ill get detailed pics to you in the am.

**DaHos** · 02-23-2016, 10:29 PM

Quote:

Originally Posted by Cash3481

Dave,
How are those hub caps?
I could use 2-3 decent drivers if it has a couple.
Mike

One of the reasons I got the truck......lol

Been trying to put a good 12" set together myself..

**DaHos** · 02-23-2016, 10:35 PM

Quote:

Originally Posted by Tumbleweed1C4

Dave, I will get in line for the hubcaps. My cab tank was removed and I am running only aux tank. Would be interested in cab tank and whatever hardware is used to interconnect to aux tank along with dash wiring behind gauge selector switch.

Let me get my set of caps first........you got the truck.....but ohhh gonna look o so nice in those DD 16.5's....

I have a few good in cab tanks and Ill take a look and see whats left of the wiring. I also have a brass floor mounted manual selector valve.

Longhornss · 02-23-2016, 10:53 PM

Quote:

Originally Posted by DaHos

[COLOR="Red"]

Ill get detailed pics to you in the am.

Sounds good lemme know what the shipping is to 48209 when you get those pictures.

**cst204x4** · 02-23-2016, 10:55 PM

New garage Dave?

zxz2121 · 02-23-2016, 11:29 PM

Interested in cluster, can I see closeup pics and any issues, cracks condition etc ? shipping to 54452 thanks

dfwright · 02-23-2016, 11:32 PM

Dave, Would it be possible to get small piece, say 5" x 5" give or take, out of what's left of that egg crate? I'd like to try repairing one I have, and I need some raw material. If you still have it, and don't mind sending me a piece, let me know the shipped price to 78163. Thanks!

bronze 72 super · 02-24-2016, 12:16 AM

I'll take the steering wheel. P.M. me your payment information. Thanks, Mike.

1972K20 · 02-24-2016, 12:20 AM

It looks like the doors are rusted on the bottom?

Mapearso · 02-24-2016, 12:36 AM

in line for the gauge cluster

**68350** · 02-24-2016, 02:31 AM

Is the big block 4 speed clutch linkage for sale?

**gmc 2500 4x4** · 02-24-2016, 06:20 AM

if ya still have the motor i would take the pivot ball bracket on the block, and any other 4 spd linkage if 68350 dont want

**DaHos** · 02-24-2016, 08:05 PM

Quote:

Originally Posted by FlameOut

I'll take the visors as long as no tears. Can you send me better pics? flameout@gmail.com

Visors and stitching are nice but they were org blue and dyed black.

Quote:

Originally Posted by Longhornss

Interested in the hump. Any pictures of the underside?

Pics added, surface scum and scale. $18 shipping

Quote:

Originally Posted by cst204x4

New garage Dave?

Its my shop on the west side of town (rental) still dealing w township on getting mine built.

Quote:

Originally Posted by zxz2121

Interested in cluster, can I see closeup pics and any issues, cracks condition etc ? shipping to 54452 thanks

Not a show winner by any means, does have surface rust on all gauges, printed circuit is good and one crack in bezel

Quote:

Originally Posted by dfwright

Dave, Would it be possible to get small piece, say 5" x 5" give or take, out of what's left of that egg crate? I'd like to try repairing one I have, and I need some raw material. If you still have it, and don't mind sending me a piece, let me know the shipped price to 78163. Thanks!

PM me a shipping address and Ill send out a chunk for u to tray out, cover shipping and its yours..

Quote:

Originally Posted by bronze 72 super

I'll take the steering wheel. P.M. me your payment information. Thanks, Mike.

PM sent, Pic added

Quote:

Originally Posted by 1972K20

It looks like the doors are rusted on the bottom?

Doors are junk !

Quote:

Originally Posted by Mapearso

in line for the gauge cluster

#2

Quote:

Originally Posted by 68350

Is the big block 4 speed clutch linkage for sale?

Small block was installed and I think the z-bar has been modified, got the clip off today and working on getting to it to see.

Quote:

Originally Posted by gmc 2500 4x4

if ya still have the motor i would take the pivot ball bracket on the block, and any other 4 spd linkage if 68350 dont want

#2

**DaHos** · 02-24-2016, 08:09 PM

Today's pile o progress.....

serge · 02-24-2016, 08:24 PM

Hello,
Interested in both upper door hinges if the hold open check still works.
Interested in both door latch controls that interior handles are attached to if spring not broken.
Also window regulator for passenger door.
How much to 44041?
Thanks for your time.

Longhornss · 02-24-2016, 09:44 PM

Hump is good enough for what I need. Sending PM
Thanks

02-23-2016, 08:25 PM	#1
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	***Part Out 72 C20 Shes a crispy one but still some salvageable parts. Originally a Big Block truck. I will be pulling it down more this week and have better idea of condition of parts. Here are a few to start it off....... PayPal or USPS money orders please......all prices are plus shipping. Black Visors $20 4spd High hump tunnel $45 Gauge Cluster $20 Interior heater tins (3) $25 Sway Bar $50 etc... Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations Last edited by DaHos; 02-23-2016 at 08:34 PM.*

02-23-2016, 09:01 PM	#3
FlameOut Registered User Join Date: May 2014 Location: Pittsburgh, PA Posts: 712	Re: Part Out 72 C20 I'll take the visors as long as no tears. Can you send me better pics? flameout@gmail.com __________________ Bill 2004 Chevy Silverado Z71 Ext Cab 1500 1972 Chevy K-10 SOLD 1967 Chevelle SS

02-23-2016, 09:15 PM	#4
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,187	Re: Part Out 72 C20 How much for the steering wheel? Yes I know what it is!! Shipping to 97050. __________________ 1971 Cheyenne Super C-20 402 4 speed 1970 El Camino L-48 350 1999 Chevy Z-71 Extended Cab 4x4 2000 Tahoe Z-71 2004 Monte Carlo S.S. Supercharged Dale Earnhardt Intimidator 1970 Chevelle, Malibu Sport Coupe 2007 Harley-Davidson FLHX Street Glide

02-23-2016, 10:01 PM	#5
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,012	Re: Part Out 72 C20 does it have the dual tank medal strip on floor telling witch tank your on if so ill take it ken

02-23-2016, 10:01 PM	#6
Razorbacker Senior Member Join Date: Aug 2011 Location: Benton, AR. Posts: 239	Re: Part Out 72 C20 Does the truck have dual horns? If so, I would be interested in the high note horn if it works. Thx, __________________ Tony 1972 Chevy K10 SWB Custom Deluxe 350\|350\|NP205 2018 GMC Sierra Z/71 Crew 2008 GMC Yukon 2007 Chevy 1500 LT 1967 Pontiac Firebird 400

02-23-2016, 08:32 PM	#2
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: Part Out 72 C20 Highlander Bench, good frame and foam. $150 (local only) SBC Fan Shroud $50 Blue seat belts, no boots on retractors. Overall nice w cleaning (I have another good GM button Ill include) $40 Steering wheel $30 Brake booster Bracket kit 3/4-1 ton all 4 pieces (or Ill ship the entire unit) $75 Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-23-2016, 10:03 PM	#7
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Re: Part Out 72 C20 Interested in the hump. Any pictures of the underside?

02-23-2016, 10:25 PM	#8
Tumbleweed1C4 Registered User Join Date: Jan 2014 Location: Gaylord, Michigan Posts: 127	Re: Part Out 72 C20 Dave, I will get in line for the hubcaps. My cab tank was removed and I am running only aux tank. Would be interested in cab tank and whatever hardware is used to interconnect to aux tank along with dash wiring behind gauge selector switch. __________________ Sleep safe in your beds because rough men stand ready in the night to visit violence on those who would do you harm 72 K5 Blazer 72 K10 SWB (in pieces under slow construction!) 72 K20

02-23-2016, 10:25 PM	#9
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Part Out 72 C20 Dave, How are those hub caps? I could use 2-3 decent drivers if it has a couple. Mike __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

02-23-2016, 10:55 PM	#14
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 2,000	Re: Part Out 72 C20 New garage Dave? __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

02-23-2016, 11:29 PM	#15
zxz2121 Registered User Join Date: May 2015 Location: merrill wisconsin Posts: 83	Re: Part Out 72 C20 Interested in cluster, can I see closeup pics and any issues, cracks condition etc ? shipping to 54452 thanks

02-23-2016, 11:32 PM	#16
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: Part Out 72 C20 Dave, Would it be possible to get small piece, say 5" x 5" give or take, out of what's left of that egg crate? I'd like to try repairing one I have, and I need some raw material. If you still have it, and don't mind sending me a piece, let me know the shipped price to 78163. Thanks! __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

02-24-2016, 12:16 AM	#17
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,187	Re: Part Out 72 C20 I'll take the steering wheel. P.M. me your payment information. Thanks, Mike. __________________ 1971 Cheyenne Super C-20 402 4 speed 1970 El Camino L-48 350 1999 Chevy Z-71 Extended Cab 4x4 2000 Tahoe Z-71 2004 Monte Carlo S.S. Supercharged Dale Earnhardt Intimidator 1970 Chevelle, Malibu Sport Coupe 2007 Harley-Davidson FLHX Street Glide

02-24-2016, 12:20 AM	#18
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 739	Re: Part Out 72 C20 It looks like the doors are rusted on the bottom?

02-24-2016, 12:36 AM	#19
Mapearso Registered User Join Date: Oct 2008 Location: los angeles, ca Posts: 926	Re: Part Out 72 C20 in line for the gauge cluster



Register or Log In To remove these advertisements.

02-24-2016, 02:31 AM	#20
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Part Out 72 C20 Is the big block 4 speed clutch linkage for sale? __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

02-24-2016, 06:20 AM	#21
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: Part Out 72 C20 if ya still have the motor i would take the pivot ball bracket on the block, and any other 4 spd linkage if 68350 dont want

02-24-2016, 08:09 PM	#23
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: Part Out 72 C20 Today's pile o progress..... Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-24-2016, 08:24 PM	#24
serge Registered User Join Date: Oct 2012 Location: Geneva, Ohio Posts: 201	Re: Part Out 72 C20 Hello, Interested in both upper door hinges if the hold open check still works. Interested in both door latch controls that interior handles are attached to if spring not broken. Also window regulator for passenger door. How much to 44041? Thanks for your time. __________________ General Contrucktor

02-24-2016, 09:44 PM	#25
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Re: Part Out 72 C20 Hump is good enough for what I need. Sending PM Thanks

Register or Log In To remove these advertisements.