The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-07-2011, 02:05 PM   #1
ApacheWillard
Registered User
 
ApacheWillard's Avatar
 
Join Date: Oct 2011
Location: Oklahoma City OK
Posts: 15
1960 Apache SWB

New to the forum, building my 1st truck, and could use some help. Have a couple of questions and looking for answers for a "novice"!

1. By staying on the budget route and going with a 3/5 lowering kit with springs and shocks for about $320, how poor is my ride quality going to be up front?
2. If I'm thinking of maybe going the 20 or 22 wheel route in the future, can I stay 6-lug or am I going to have to go with a disc front kit and swapping to a 5 lug rear end?
3. Positive I have a good ole stock rear end turning crazy r's while driving 45. Ideas on safe and simple rear end swaps with a better ratio and 5 lug?

Any threads you could post would be great, and especially interested on anybody that has personally had a static drop c10 with springs and shocks only. Thanks for all the help and advice you can give, I have a lot of old parts, some new ones, and am really excited about my build!!!
Attached Images
 
ApacheWillard is offline   Reply With Quote
Old 11-07-2011, 02:13 PM   #2
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,625
Re: 1960 Apache SWB

Can't answer any of your questions, but I can say "Welcome". By the way, how about more pictures of your truck, especially if you have an original steering wheel. Under the hood would be nice as well. Don't be shy, we thrive on pictures!
__________________
1963 Chevrolet Truck Literature
LINK: https://picasaweb.google.com/113840717762774560215

YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows.
https://www.youtube.com/results?sear...otruk63&page=1
aerotruk63 is offline   Reply With Quote
Old 11-07-2011, 02:27 PM   #3
glos55
Registered User
 
glos55's Avatar
 
Join Date: Nov 2010
Location: Kalamazoo, MI
Posts: 1,008
Re: 1960 Apache SWB

Welcome ApacheWillard! Great to have u on the site!! I'm liking what your'e starting with. Looks like a alot of fun to me. I took a coil and a little over half off the front and used jeep springs in the rear and that gave me 4.5 front and 4 rear drop. It rides good but I'm running 255/60s front and 275/60s in the rear which help. If you do a drop like mine and then run 20s or 22s the ride will be harsh. If you decide on the big wheel rubber band style tires then spend the extra money and lower it with spindles in the front. Anyone else have anything for Willard? Again Welcome!!! Didn't you just have an earthquake?
glos55 is offline   Reply With Quote
Old 11-07-2011, 03:55 PM   #4
brawley
Easy Does It
 
brawley's Avatar
 
Join Date: Apr 2007
Location: Dirdy Mo , North Carolina
Posts: 450
Re: 1960 Apache SWB

welcome ! its hard to be on a budget and do what we want to these trucks- I found that out the hard way, just do 1 thing at a time- that way you don't get in over your head. sometimes you end up spending more money trying to save money- unless you have great fab skills and lots of time. your better off buying kits designed for these trucks. I had my stock rearend rebuilt and I did a 3/5 drop kit and my truck drives nice and smooth - ive always thought these trucks ride smoother than newer ones.
brawley is offline   Reply With Quote
Old 11-07-2011, 04:52 PM   #5
ApacheWillard
Registered User
 
ApacheWillard's Avatar
 
Join Date: Oct 2011
Location: Oklahoma City OK
Posts: 15
Re: 1960 Apache SWB

Yeah just had an earthquake, pretty wild to feel one that much here in OK! Leaning towards just buying the 3/5 kit and going from there, I can always add spindles and lowering blocks later on I guess.

I'm dying for more comments here, help a brotha out!!! Thanks!!!

More pics to follow...
Posted via Mobile Device
ApacheWillard is offline   Reply With Quote
Old 11-07-2011, 05:22 PM   #6
Corts60
Just here to tinker
 
Corts60's Avatar
 
Join Date: Jun 2008
Location: Holland, MI
Posts: 3,672
Re: 1960 Apache SWB

Welcome from Victoria! Well, since you own a '60, you have a torsion set up in the front right? Or has some one changed that? If it is still the torsion, you can back off the tension to lower the front and put Jeep TJ springs in the rear to get your desired drop. You can usually find the Jeep springs for around $40 or less on craigslist or local 4x4 shops.

I lowered my suburban for $40 and I still maintain a good ride. I didn't back my front torsion off all the way either. The front can get lower.
Corts60 is offline   Reply With Quote
Old 11-07-2011, 05:24 PM   #7
chevytrucknut61
Registered User
 
chevytrucknut61's Avatar
 
Join Date: Mar 2004
Location: Wichita Ks.
Posts: 130
Re: 1960 Apache SWB

Welcome! First you have torsion bars on the front of your truck so you have to swap the front if you are going to drop it with springs.The bars can be adjusted down some but not a lot. I put Early classic 2 1/2 in. drop spindles on my truck. Wish mine looked as good as yours when I started! Again welcome.
Attached Images
 
chevytrucknut61 is offline   Reply With Quote
Old 11-07-2011, 05:35 PM   #8
ApacheWillard
Registered User
 
ApacheWillard's Avatar
 
Join Date: Oct 2011
Location: Oklahoma City OK
Posts: 15
Re: 1960 Apache SWB

Guess I should have cleared that up, yes it has a 63 front end with coils.

I'm digging the wide white walls, find a good deal???
Posted via Mobile Device
ApacheWillard is offline   Reply With Quote
Old 11-07-2011, 05:58 PM   #9
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,625
Re: 1960 Apache SWB

Hydraulic clutch, single master? Pictures My friend, pictures!
__________________
1963 Chevrolet Truck Literature
LINK: https://picasaweb.google.com/113840717762774560215

YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows.
https://www.youtube.com/results?sear...otruk63&page=1
aerotruk63 is offline   Reply With Quote
Old 11-07-2011, 06:05 PM   #10
Dustin07
Stirrer of the Pot
 
Join Date: Mar 2008
Location: washington
Posts: 477
Re: 1960 Apache SWB

Quote:
Originally Posted by ApacheWillard View Post
Guess I should have cleared that up, yes it has a 63 front end with coils.

I'm digging the wide white walls, find a good deal???
Posted via Mobile Device

sweet! my '61 already has the front end done too. i'm super excited about that


go with drop spindles up front.
Dustin07 is offline   Reply With Quote
Old 11-07-2011, 07:48 PM   #11
Corts60
Just here to tinker
 
Corts60's Avatar
 
Join Date: Jun 2008
Location: Holland, MI
Posts: 3,672
Re: 1960 Apache SWB

Quote:
Originally Posted by ApacheWillard View Post
Guess I should have cleared that up, yes it has a 63 front end with coils.

I'm digging the wide white walls, find a good deal???
Posted via Mobile Device
They are Cokers. Pricey but they ride great and do not have all the characteristic "groove grab" or egg shape problems like early nylons.
Corts60 is offline   Reply With Quote
Old 11-08-2011, 02:01 PM   #12
jason65
Registerd User
 
jason65's Avatar
 
Join Date: Sep 2008
Location: Oklahoma
Posts: 2,118
Re: 1960 Apache SWB

I cut one coil off the front springs and ended up about 3 1/2" below stock and put 5" drop springs in the rear. At 5" of rear drop you'll need to notch the frame over the axle and get an adjustable panhard bar. I had to remove my front bumpstops. It drives straight and rides as smooth as a Cadillac.
Attached Images
 

Last edited by jason65; 11-08-2011 at 04:23 PM.
jason65 is offline   Reply With Quote
Reply

Bookmarks

Tags
1960, apache, lowering, rear end, suspension

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:45 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com