How about some pics of S10 S15 Luv Blazer

[abebummy26]

this makes me really want a first gen with a tech 4 and a t5!

[hotrod 80]

My latest project .

[1952ssr]

I sold the Typhoon then started building my AD with an LT1/4L60 on a S10 frame.

[John Gilbert]

Oh, and it has a Sir Michaels hidden hitch... I gave the steel rollpan to a friend — The mirrors are Street Scene... Its just a good little truck.

[james843]

[Butcherboy]

More progress.. Getting very Close!!













Ready for Kansas summer cruise'n!

Justin

[kustombrad]

Here's my 98 daily driver Bell Tech spindles, cut 1 coil, 3 inch blocks in the back and c'd the frame. Wheels are Boyd Junkyards 17x8 and 17x7 w/255/55/17 back and 215/50/17 front. I polished it up and put some pinstriping on it. I've been driving the crap out of it for the last 5 yrs. and it's been a great driver!

[1/2Dozen]

No longer have it but here are a few pictures of my 94

[firenuttz]

here is the s-10 that my father and i built, we got rid of it due to too many trucks but we sold it to my uncle so its still in the family

[archie87]

from the beginning



and now

[aford78]

Here are a couple pics of my mud trucks

[clemson71guy]

99 zr2 with 152,000 miles and still going. only thing i have done to is is shocks, balljoints, water pump, and thrush muffler. I wanted to do a 5.7 swap in it but NC laws make it nearly impossible.

[snakester]

Originally Posted by aford78

Here are a couple pics of my mud trucks

are those the same ires on the first s10

[66redw/white]

heres my old blazer. it was pretty sweet. slightly built motor. just a 4.3. gears a posi. very fun. sadly i sold it.


heres a cool little sound clip.

YouTube - cammed blazer

[kb3]

one more I just got
I may have it sold

[66redw/white]

and here is my new project. its a 90 jimmy 4wd. should be pretty sweet when i finally get it finished. the plan is 5.3 bored 3.9 and stroked 4.0 to 383. around a 9.5 compression ratio, a solid cam, around a 3000rpm stall, and a 4l80e. thats not even the best part. awd conversion thanks to an astro van transfer case and front diff. and most likely a good little turbo set up. maybe 8 psi. its all about the flow any way. heres the pics

[66redw/white]

as it sets now

[BarryB]

Originally Posted by 66redw/white

as it sets now

Now your project is one I would be interested in following. sounds like a wicked set up.

[TomPetty]

This is my first truck and ill prolly take it to the grave lol. I got it when i was 12 and fixed it up (first picture). Has a 2.8 v6 with the five speed manual and i got it with 180000 miles on it, now it has 250000 and still running hard. High school took its toll on the truck from dirt roads and running with 4 wheel drives down mud roads. I was always amazed on how good it did on goin mudding with my friends and they could tell you a bunch of stories about it lol. After high school i repainted it before i went to autobody school because i had neglected my old friend alot and she looked horrible. then in college i kinda went under a fence and had to repaint some of it again. Ill never stop driving this truck, bc this chevy hasn't ever let me down!

[89chevsj]

you guys may be on to somthing. after seeing these especially the retro styled one with the 350. I am going to look into the s10 market see if i cant pick one up.

[66redw/white]

thanks man. the progess is gonna be alittle slow. im in refit now, patrol within a month, and when i get back im headed to shore duty. but all progress is progress. i dont have a thread here yet, but i do have one on s10forum. again, thanks for the intrest.

[Zoomad75]

Here's my 97 S10 I recently picked up. 4.3 5-speed. Cowl hood and true duals.

[yawdie1]

Here is my 91 s10 blazer! It's fun with the LT1! Still fine tuning and changing things.

[nuclearmeltdown2046]

Here's my lil 82 s10 ......



She's got 160k on her but that little 4 cylinder still runs good .

.........................., peace Brian

[CC69Rat]

Here's mine - 1996 4.3L 5 speed. 60k original miles. Little old man had it. Dropped with 2" spindles and 1" front spring, 2" blocks, .5" set back plates, and 3 deg JTR pinion shims. JTR Billet carrier bearing spacer kit. Smooth as a caddy on the freeway! Looks like a new truck inside. My daily driver. Major Craigs List score!