c10 control arms fit a c20?

[rdkonkel]

I have a 72 c20, i would like to update the control arms, spindles etc, maybe even the rotor/bearing assembly as it is heavy.
This is a 2 wheel drive lowered with a 6.0, mainly for weekend cruising/beating

[68shortwide]

I wanna say yes to the control arms, the spindles and hubs are where my concern is...

[lolife99]

C10 uppers will work on a c20 with the correct balljoint installed.
C10 lowers have a smaller balljoint hole than the C20 version.

[michael bustamante]

Originally Posted by lolife99

C10 uppers will work on a c20 with the correct balljoint installed.
C10 lowers have a smaller balljoint hole than the C20 version.

This is true. Ask me how come i have c20 lower control arms for sale.

[18436572GMC]

c10 control arms should work if you change to c10 spindles. The ball joints are different

['68 Newtricks]

I don't know if they work, but will post what I know.

My 68 C20 upper A-arm studs were 9/16"
The C10 frame I bought has 1/2" studs.
All factory stuff.
Whether the holes in the A-arms are the same, I don't know. I didn't realize the difference until most everything was thrown away.

[rjs53]

This is an old one but wondering is the ball joint longer? Not sure why if using C10s control arms, why I would need c20 ball joints. Just curious, my 69 C10 frame is junk. I found a c20 at a good price. The guys says all will work, but has never done it. Can someone give me an answer or point me in the right direction, thanks

[Ironangel]

Maybe this will help... http://67-72chevytrucks.com/vboard/s...68&postcount=4