292 Engine mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spurgin1 · 07-14-2018, 01:40 PM

Are the engine mounts the same on 292 as 250. I know the passenger frame mount is different. Thanks

**Captainfab** · 07-15-2018, 12:25 AM

The engine mounts themselves are the same '63-'72 for the 230,250, 292, 283, 307, 327 and 350's

Spurgin1 · 07-15-2018, 11:22 AM

Quote:

Originally Posted by Captainfab

The engine mounts themselves are the same '63-'72 for the 230,250, 292, 283, 307, 327 and 350's

Am I missing spacers or something? It likes about an inch being long enough to set on the perch.
Posted via Mobile Device

padresag · 07-15-2018, 02:07 PM

Quote:

Originally Posted by Spurgin1

Am I missing spacers or something? It likes about an inch being long enough to set on the perch.
Posted via Mobile Device

are you sure it is a 292??
ron

Spurgin1 · 07-15-2018, 03:36 PM

Quote:

Originally Posted by padresag

are you sure it is a 292??
ron

Positive
Posted via Mobile Device

padresag · 07-15-2018, 05:55 PM

show a picture of the mounting in question. it is either one way or the other.
ron

**Captainfab** · 07-16-2018, 12:07 AM

Do you have the brackets between the block and the engine mounts?

padresag · 07-17-2018, 07:35 PM

Quote:

Originally Posted by Captainfab

Do you have the brackets between the block and the engine mounts?

it sounds like someone using a 292 perch on a 230-250 eng. there are only 2 different perches in 2 wd and 2 different engine applications. if it don't match up with one it must be the other. there were no other options. he may be also trying to fit a gmc perch in there but do not know what that outcome would be but doubt that it would work.
ron

dmulally · 07-18-2018, 09:44 PM

I had dramas with mine as somebody had butchered some BB mounts to fit the brackets for a 250. So when I put a V8 in it was about an inch out.

I got rid of it all and went for a tubular mount that moved the engine forward for the MSD cap.

padresag · 07-18-2018, 09:56 PM

Quote:

Originally Posted by dmulally

I had dramas with mine as somebody had butchered some BB mounts to fit the brackets for a 250. So when I put a V8 in it was about an inch out.

I got rid of it all and went for a tubular mount that moved the engine forward for the MSD cap.

but we so far can only go by the info that has been given and it is skimpy. n o one has mentioned anything other than a stock applications so far. he has been asked on 2 forums for pictures and hasn't done so yet. if pictures are given then the problem may be solved
ron

07-14-2018, 01:40 PM	#1
Spurgin1 Registered User Join Date: Jul 2018 Location: Rocheport Missouri Posts: 6	292 Engine mount Are the engine mounts the same on 292 as 250. I know the passenger frame mount is different. Thanks

07-15-2018, 12:25 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 292 Engine mount The engine mounts themselves are the same '63-'72 for the 230,250, 292, 283, 307, 327 and 350's __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-15-2018, 05:55 PM	#6
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: 292 Engine mount show a picture of the mounting in question. it is either one way or the other. ron

07-16-2018, 12:07 AM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 292 Engine mount Do you have the brackets between the block and the engine mounts? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-18-2018, 09:44 PM	#9
dmulally Registered User Join Date: Feb 2018 Location: Shannon, New Zealand Posts: 31	Re: 292 Engine mount I had dramas with mine as somebody had butchered some BB mounts to fit the brackets for a 250. So when I put a V8 in it was about an inch out. I got rid of it all and went for a tubular mount that moved the engine forward for the MSD cap.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.