Dremel Pumpkin carving tool - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hchad18 · 10-30-2006, 11:14 PM

SUCKED. Made a big fat mess. Was hard to cut with. I even used rotozip bits. Did the job in the end but the Black and Decker corded dremel too was much better, but it still sucked too. Maybe the air saw next year.

JoetheMobster · 10-31-2006, 02:03 AM

I made a carving tool out of a jigsaw blade. Ground it down to a point, took some dowel and cut a slot in it, epoxied the blade into the dowel, thing works great! I too tried my dremel on a pumpkin, what a freakin mess that makes!

ghetto_superman · 10-31-2006, 02:11 AM

best tool is a big gallagher mallet.. who needs pumpkins anyway.

Hoods69BadBowTie · 10-31-2006, 02:19 AM

I was thinking more along the lines of a big chainsaw but that also would make a huge mess.

ghetto_superman · 10-31-2006, 02:21 AM

haha i was also thinking that originally, but then gallagher popped into my head with his watermelon (and everything else) smashing antics...

jimfulco · 10-31-2006, 02:35 AM

LUV2XCLR8 · 10-31-2006, 04:47 AM

A sawzall is the only way to go

87 STEPPER · 10-31-2006, 05:56 AM

So where's a pic of the orange gord?

Better yet let's see a pic of your mess!

oj70chevy · 10-31-2006, 09:16 AM

CG · 10-31-2006, 09:45 AM

We've been having pumpkin parties at our house since my sons were little. We invited friends and family and all of their little kiddos, (most of them are adults now). Lots of food and lots of fun for everyone. Some years we would have between 40 and 50 pumpkins. I've seen every kind of tool mess up a pumpkin, lol. Unfortunatly I dont have any pics of those days on my puter, pre digital camera, but here is this years. We really peared (spelling?) it down. My sons are the two on the left and my grand daughter is the little one. Sorry, my honey and myself arent in the pic. Next year we are considering having a pumpkin party reunion with everyone that has ever been, that should be out of control...but fun.

phlegm · 10-31-2006, 02:10 PM

I like the tools in the little kits, even if you dont use the print, its easier making old scool pumpkins too.

jcueckert13 · 10-31-2006, 03:41 PM

i prefer either the 12 gauge or a 45 but the mess is what is so entertaining

ain't_done_yet · 10-31-2006, 03:44 PM

Ya'll have fun with this one:

http://www.toilette-humor.com/halloween/carve.html

10-30-2006, 11:14 PM	#1
hchad18 Registered User Join Date: Mar 2006 Location: AZ Posts: 372	Dremel Pumpkin carving tool SUCKED. Made a big fat mess. Was hard to cut with. I even used rotozip bits. Did the job in the end but the Black and Decker corded dremel too was much better, but it still sucked too. Maybe the air saw next year.

10-31-2006, 02:03 AM	#2
JoetheMobster Listening since '86 Join Date: Sep 2001 Location: Canada Posts: 1,799	Re: Dremel Pumpkin carving tool I made a carving tool out of a jigsaw blade. Ground it down to a point, took some dowel and cut a slot in it, epoxied the blade into the dowel, thing works great! I too tried my dremel on a pumpkin, what a freakin mess that makes! __________________ 2007 Saturn Aura - hey it WAS a GM product Last edited by JoetheMobster; 10-31-2006 at 02:04 AM.

10-31-2006, 02:11 AM	#3
ghetto_superman Registered User Join Date: Sep 2006 Location: Omaha, NE Posts: 1,982	Re: Dremel Pumpkin carving tool best tool is a big gallagher mallet.. who needs pumpkins anyway.

10-31-2006, 02:19 AM	#4
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Dremel Pumpkin carving tool I was thinking more along the lines of a big chainsaw but that also would make a huge mess. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

10-31-2006, 02:21 AM	#5
ghetto_superman Registered User Join Date: Sep 2006 Location: Omaha, NE Posts: 1,982	Re: Dremel Pumpkin carving tool haha i was also thinking that originally, but then gallagher popped into my head with his watermelon (and everything else) smashing antics...

10-31-2006, 02:35 AM	#6
jimfulco Registered User Join Date: May 2003 Location: Shreveport LA Posts: 3,170	Re: Dremel Pumpkin carving tool

10-31-2006, 04:47 AM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Dremel Pumpkin carving tool A sawzall is the only way to go __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-31-2006, 05:56 AM	#8
87 STEPPER STILL PLAYS WITH TRUX Join Date: Nov 2002 Location: Melbourne, Fla. Posts: 2,764	Re: Dremel Pumpkin carving tool So where's a pic of the orange gord? Better yet let's see a pic of your mess! __________________ ~~Bruce~~ MY 87 STEPPER MY 99 2D/WD TAHOE

10-31-2006, 09:16 AM	#9
oj70chevy 250 V-6 Club Join Date: Feb 2005 Location: San antonio, TX. Posts: 898	Re: Dremel Pumpkin carving tool __________________ 1970 Chevy C/10 6 Cyl. 43k original miles all factory .http://67-72chevytrucks.com/vboard/s...d.php?t=197523 Never ask a stupid question unless you want a stupid answer .

10-31-2006, 09:45 AM	#10
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,786	Re: Dremel Pumpkin carving tool We've been having pumpkin parties at our house since my sons were little. We invited friends and family and all of their little kiddos, (most of them are adults now). Lots of food and lots of fun for everyone. Some years we would have between 40 and 50 pumpkins. I've seen every kind of tool mess up a pumpkin, lol. Unfortunatly I dont have any pics of those days on my puter, pre digital camera, but here is this years. We really peared (spelling?) it down. My sons are the two on the left and my grand daughter is the little one. Sorry, my honey and myself arent in the pic. Next year we are considering having a pumpkin party reunion with everyone that has ever been, that should be out of control...but fun. Attached Images Last edited by CG; 10-31-2006 at 09:45 AM.

10-31-2006, 02:10 PM	#11
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	Re: Dremel Pumpkin carving tool I like the tools in the little kits, even if you dont use the print, its easier making old scool pumpkins too. __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was

10-31-2006, 03:41 PM	#12
jcueckert13 Registered User Join Date: Apr 2003 Location: Edgewood New Mexico Posts: 2,088	Re: Dremel Pumpkin carving tool i prefer either the 12 gauge or a 45 but the mess is what is so entertaining __________________ 1990 subaru legcy (daily driver) 1987 Toyota 4runner (weekend toy) 1968 C30 flatbed dually 1970 C10 longbed stepside (in pieces) 1976 Dodge Dart 1963 Dodge Dart

10-31-2006, 03:44 PM	#13
ain't_done_yet and won't ever be Join Date: Jun 2000 Location: Arbala, TX Posts: 159	Re: Dremel Pumpkin carving tool Ya'll have fun with this one: http://www.toilette-humor.com/halloween/carve.html __________________ '82 SWB 1/2T Silverado (project) '96 SWB 1/2T Silverado, factory leather, Sony CD, Sirius Satellite 2006 Ram 3500 Megacab 4x4 SRW, AMSOIL/Injen CAI, AMSOIL By-Pass, Mag-Hytech cover, AMSOIL Lubriants throughout, and much more!! CHANGE YOUR MIND...NOT YOUR OIL



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.