63 C10 gas pedal conversion questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rusty one · 04-29-2019, 06:47 PM

I'm starting to work on my 63 Fleetside project and I'd like to get rid of the mechanical stock linkage and get a drive by wire setup. I'll be running a 283 tripower with a 200r4 trans.
The location of the stock pedal assembly is in a weird place...it not flat on the floor but more on the side of the trans tunnel or should I say next to it.
Anyone using a drive by wire setup? If so for what model year vehicles did they get it from??.post some pics too. They really help!
Thanks in advance..

**Clyde65** · 04-29-2019, 07:21 PM

I used this for my DBW pedal

http://67-72chevytrucks.com/vboard/s...d.php?t=660388

**The Rocknrod** · 04-29-2019, 08:10 PM

So your getting an LS? Loosing the 283 and tri-power.

Rusty one · 04-29-2019, 09:49 PM

I probably should have asked if anyone used or knows of a pedal conversion that uses a cable instead of the stock linkage on my 63 C10. As mentioned,I'll be running a 283 with tri power and a 200R4.

**The Rocknrod** · 04-30-2019, 10:59 AM

You'r probably wanting something like this?
http://67-72chevytrucks.com/vboard/s...00#post1383300
Or this?:
http://67-72chevytrucks.com/vboard/s...d.php?t=530828

1998c1500 · 04-30-2019, 11:32 AM

This one was in my truck when I bought it.

https://www.amazon.com/Lokar-SG-6007.../dp/B000COMNM2

**cwcarpenter98** · 04-30-2019, 12:56 PM

I used a squarebody pedal, but it did not fit the best. I would use the 71-72 pedal if I did it again

Rusty one · 04-30-2019, 01:09 PM

Quote:

Originally Posted by 1998c1500

This one was in my truck when I bought it.

https://www.amazon.com/Lokar-SG-6007.../dp/B000COMNM2

Any pics of it in your cab?? Where was it mounted?

Rusty one · 04-30-2019, 01:10 PM

[quoted=The Rocknrod;8516594]You'r probably wanting something like this?
http://67-72chevytrucks.com/vboard/s...00#post1383300
Or this?:
http://67-72chevytrucks.com/vboard/s...d.php?t=530828[/quote]

Interesting..
Thanks for the links!

1998c1500 · 05-01-2019, 02:11 PM

Quote:

Originally Posted by Rusty one

Any pics of it in your cab?? Where was it mounted?

here you go

Rusty one · 05-01-2019, 03:44 PM

Quote:

Originally Posted by 1998c1500

here you go

Thanks...do you know where the original was mounted?? What year truck is this in?

1998c1500 · 05-01-2019, 05:26 PM

Quote:

Originally Posted by Rusty one

Thanks...do you know where the original was mounted?? What year truck is this in?

Mine is a 65. It’s hard to get in a photo but it is above and to the left of the uneven spot

**slepysal** · 05-01-2019, 08:37 PM

this was my old set up
Name: old throttle.jpg
Views: 1758
Size: 43.7 KB

here is my new no name pedal
Name: new throttle.jpg
Views: 2052
Size: 57.3 KB

Rusty one · 05-01-2019, 08:48 PM

Quote:

Originally Posted by slepysal

this was my old set up
Attachment 1899830

here is my new no name pedal
Attachment 1899829

I can see where the stock pedal was mounted. Thanks for the pic. I'm guessing on the opposite side your cable lines up to your carb bracket.

Rusty one · 05-01-2019, 08:52 PM

Quote:

Originally Posted by 1998c1500

Mine is a 65. It’s hard to get in a photo but it is above and to the left of the uneven spot

No issues with the pedal being where it is? Looks like a nice set up. I'm trying to find something closer to a stock look...but I'll keep looking. Have you seen anyone use the old stock pedal on a new cable set up??

04-29-2019, 06:47 PM	#1
Rusty one Registered User Join Date: Apr 2012 Location: NYC Posts: 103	63 C10 gas pedal conversion questions I'm starting to work on my 63 Fleetside project and I'd like to get rid of the mechanical stock linkage and get a drive by wire setup. I'll be running a 283 tripower with a 200r4 trans. The location of the stock pedal assembly is in a weird place...it not flat on the floor but more on the side of the trans tunnel or should I say next to it. Anyone using a drive by wire setup? If so for what model year vehicles did they get it from??.post some pics too. They really help! Thanks in advance..

04-29-2019, 07:21 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: 63 C10 gas pedal conversion questions I used this for my DBW pedal http://67-72chevytrucks.com/vboard/s...d.php?t=660388 __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

04-29-2019, 08:10 PM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 63 C10 gas pedal conversion questions So your getting an LS? Loosing the 283 and tri-power. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-29-2019, 09:49 PM	#4
Rusty one Registered User Join Date: Apr 2012 Location: NYC Posts: 103	Re: 63 C10 gas pedal conversion questions I probably should have asked if anyone used or knows of a pedal conversion that uses a cable instead of the stock linkage on my 63 C10. As mentioned,I'll be running a 283 with tri power and a 200R4.

04-30-2019, 10:59 AM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 63 C10 gas pedal conversion questions You'r probably wanting something like this? http://67-72chevytrucks.com/vboard/s...00#post1383300 Or this?: http://67-72chevytrucks.com/vboard/s...d.php?t=530828 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-30-2019, 11:32 AM	#6
1998c1500 Registered User Join Date: Apr 2003 Location: Austin, Texas Posts: 200	Re: 63 C10 gas pedal conversion questions This one was in my truck when I bought it. https://www.amazon.com/Lokar-SG-6007.../dp/B000COMNM2 __________________ 1965 C10 1967 Camaro 1998 C1500 2011 Colorado W/T

04-30-2019, 12:56 PM	#7
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,426	Re: 63 C10 gas pedal conversion questions I used a squarebody pedal, but it did not fit the best. I would use the 71-72 pedal if I did it again __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

04-30-2019, 01:10 PM	#9
Rusty one Registered User Join Date: Apr 2012 Location: NYC Posts: 103	Re: 63 C10 gas pedal conversion questions [quoted=The Rocknrod;8516594]You'r probably wanting something like this? http://67-72chevytrucks.com/vboard/s...00#post1383300 Or this?: http://67-72chevytrucks.com/vboard/s...d.php?t=530828[/quote] Interesting.. Thanks for the links!

05-01-2019, 08:37 PM	#13
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 63 C10 gas pedal conversion questions this was my old set up here is my new no name pedal __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.