I can't believe this - The 1947 - Present Chevrolet & GMC Truck Message Board Network

diablo03 · 07-23-2013, 08:32 PM

So I saw this C60 Viking today '59, duelly, beautiful. I went in and asked the person if they were selling it, said yes, got all the paper work done, and then at the end of it all, he said he wasn't going to sell it and take it to the scrapper instead. I couldn't believe it. I was so sad to see one of those truck go to the scrap yard......just a sad day.... and i didn't get the truck :-(

C10 - C90 Bill · 07-23-2013, 08:52 PM

That's pretty strange. Did he say why he changed his mind?

diablo03 · 07-23-2013, 09:56 PM

nope.....just said he didnt want the hassle of selling it.....i was really confused

**special-K** · 07-24-2013, 07:12 AM

What hassle? He already did everything,just had to take your money. That's a hassle? The hassle would become all yours at that point. I truly don't understand how some minds work. Evidently that one had no conscience. Me,I'd rather see one saved than scraped. That is enough to make it worth any so-called hassle.

diablo03 · 07-24-2013, 11:07 AM

I would have much rather dealt with the hassle than seen a perfectly restorable truck go to rhe scraper. It had its issues, bit could have easily been fixed
Posted via Mobile Device

**special-K** · 07-24-2013, 09:57 PM

Yeah,that's what gets me. He had a buyer willing to take it on,so what's the hassle? Heck,you would have the hassle of hauling it off and he wouldn't have the hassle of hauling it in for scrap. Duh?

diablo03 · 07-24-2013, 11:33 PM

I don't understand it at all....It was a perfect truck for what i wanted it for.....i guess i'm on the look out for another one.... ..sigh....

**special-K** · 07-25-2013, 09:04 AM

Check your local scrap yards. I'm an ATHS member and we get a bi-monthly magazine with free classified section. I'll keep my eye on that for you. Most stuff is right reasonable. Actually,you could check their website: www.aths.org . Nothing like that in the latest issue

Eljefe4life · 08-01-2013, 04:19 PM

Sounds to me like someone offered him a few more dollars than you......

diablo03 · 08-09-2013, 11:47 PM

so it turns out the owner decided to pull the motor and then scrap the rest of it. A friend of mine happened to run into what was left of the truck when he went to the junk yard....guess i will call up there and see if they want to sell it to me

**TJ's Chevy** · 09-02-2013, 11:46 PM

He could have just been frank with you an told you why he didn't want to sell it. Not like its that hard to tell someone why they changed there mind. I've done that in the past and people were happier knowing why I decieded not to sell it than just leaving them clueless. What the big hassle about selling something????

**special-K** · 09-03-2013, 07:40 AM

Yeh,selling isn't a hassle when you have a buyer standing right in front of you who will deal with hauling the bigass sumbugger outta there for ya

......

ETsC10 · 09-03-2013, 11:22 AM

Quote:

Originally Posted by diablo03

so it turns out the owner decided to pull the motor and then scrap the rest of it. A friend of mine happened to run into what was left of the truck when he went to the junk yard....guess i will call up there and see if they want to sell it to me

Be cool to see you get it, motorize it, restore it and then show it off to the dum bugger...
then ask if he's interested in a nicely restored ($$$$) truck!

.

07-23-2013, 08:32 PM	#1
diablo03 Registered User Join Date: Apr 2013 Location: St Louis MO Posts: 151	I can't believe this So I saw this C60 Viking today '59, duelly, beautiful. I went in and asked the person if they were selling it, said yes, got all the paper work done, and then at the end of it all, he said he wasn't going to sell it and take it to the scrapper instead. I couldn't believe it. I was so sad to see one of those truck go to the scrap yard......just a sad day.... and i didn't get the truck :-( __________________ 1963 Chevy C10 (under construction).....build thread 2009 Honda Shadow 2008 Mazda 5 2013 Ford Sedan Interceptor AWD 2017 Harbor Freight 4x8 trailer (great for hauling parts) 2017 Honda Rebel

07-23-2013, 08:52 PM	#2
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,066	Re: I can't believe this That's pretty strange. Did he say why he changed his mind? __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

07-23-2013, 09:56 PM	#3
diablo03 Registered User Join Date: Apr 2013 Location: St Louis MO Posts: 151	Re: I can't believe this nope.....just said he didnt want the hassle of selling it.....i was really confused __________________ 1963 Chevy C10 (under construction).....build thread 2009 Honda Shadow 2008 Mazda 5 2013 Ford Sedan Interceptor AWD 2017 Harbor Freight 4x8 trailer (great for hauling parts) 2017 Honda Rebel

07-24-2013, 07:12 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: I can't believe this What hassle? He already did everything,just had to take your money. That's a hassle? The hassle would become all yours at that point. I truly don't understand how some minds work. Evidently that one had no conscience. Me,I'd rather see one saved than scraped. That is enough to make it worth any so-called hassle. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-24-2013, 11:07 AM	#5
diablo03 Registered User Join Date: Apr 2013 Location: St Louis MO Posts: 151	Re: I can't believe this I would have much rather dealt with the hassle than seen a perfectly restorable truck go to rhe scraper. It had its issues, bit could have easily been fixed Posted via Mobile Device __________________ 1963 Chevy C10 (under construction).....build thread 2009 Honda Shadow 2008 Mazda 5 2013 Ford Sedan Interceptor AWD 2017 Harbor Freight 4x8 trailer (great for hauling parts) 2017 Honda Rebel

07-24-2013, 09:57 PM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: I can't believe this Yeah,that's what gets me. He had a buyer willing to take it on,so what's the hassle? Heck,you would have the hassle of hauling it off and he wouldn't have the hassle of hauling it in for scrap. Duh? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-24-2013, 11:33 PM	#7
diablo03 Registered User Join Date: Apr 2013 Location: St Louis MO Posts: 151	Re: I can't believe this I don't understand it at all....It was a perfect truck for what i wanted it for.....i guess i'm on the look out for another one.... ..sigh.... __________________ 1963 Chevy C10 (under construction).....build thread 2009 Honda Shadow 2008 Mazda 5 2013 Ford Sedan Interceptor AWD 2017 Harbor Freight 4x8 trailer (great for hauling parts) 2017 Honda Rebel

07-25-2013, 09:04 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: I can't believe this Check your local scrap yards. I'm an ATHS member and we get a bi-monthly magazine with free classified section. I'll keep my eye on that for you. Most stuff is right reasonable. Actually,you could check their website: www.aths.org . Nothing like that in the latest issue __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-01-2013, 04:19 PM	#9
Eljefe4life Registered User Join Date: Jul 2013 Location: Saginaw, Michigan Posts: 13	Re: I can't believe this Sounds to me like someone offered him a few more dollars than you......

08-09-2013, 11:47 PM	#10
diablo03 Registered User Join Date: Apr 2013 Location: St Louis MO Posts: 151	Re: I can't believe this so it turns out the owner decided to pull the motor and then scrap the rest of it. A friend of mine happened to run into what was left of the truck when he went to the junk yard....guess i will call up there and see if they want to sell it to me __________________ 1963 Chevy C10 (under construction).....build thread 2009 Honda Shadow 2008 Mazda 5 2013 Ford Sedan Interceptor AWD 2017 Harbor Freight 4x8 trailer (great for hauling parts) 2017 Honda Rebel

09-02-2013, 11:46 PM	#11
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: I can't believe this He could have just been frank with you an told you why he didn't want to sell it. Not like its that hard to tell someone why they changed there mind. I've done that in the past and people were happier knowing why I decieded not to sell it than just leaving them clueless. What the big hassle about selling something???? __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

09-03-2013, 07:40 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: I can't believe this Yeh,selling isn't a hassle when you have a buyer standing right in front of you who will deal with hauling the bigass sumbugger outta there for ya ...... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.