NE 73-87 parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Oakdale Bud · 08-22-2018, 04:38 PM

>

it wont show my emojis

GM-1979 · 08-25-2018, 03:27 PM

Interested in back glass 86
Is it sliding window ?

thinair · 08-25-2018, 05:00 PM

Quote:

Originally Posted by GM-1979

Interested in back glass 86
Is it sliding window ?

Solid one piece glass

thinair · 09-28-2018, 12:03 AM

Ttt

rustyfive-seven · 09-28-2018, 11:26 AM

wow good stuff! following on fb too!

SBTork · 09-28-2018, 12:31 PM

looking for a nice used stock passenger side mirror for my '85 Suburban, just the regular stainless NON sport mirror type. Do you have any in your inventory?

thinair · 09-28-2018, 10:15 PM

Quote:

Originally Posted by SBTork

looking for a nice used stock passenger side mirror for my '85 Suburban, just the regular stainless NON sport mirror type. Do you have any in your inventory?

I do but it will be a day or so until I get back in town and can look for the best one.

thinair · 09-28-2018, 10:16 PM

Quote:

Originally Posted by rustyfive-seven

wow good stuff! following on fb too!

Hey Thanks!

**MikeB** · 09-28-2018, 10:57 PM

Do you by chance have an 82 fuse panel that's not corroded, along with the dash harness?

trukman1 · 10-07-2018, 12:00 PM

Do you have any of the brushed aluminum caps that go over the ends of the pull handles on the doors? (For an '88 K5).

ETA: Im also in need of a horn button, the tall, narrow one for a Chevrolet.

thinair · 10-10-2018, 03:27 PM

Sorry for the delayed responses

thinair · 10-10-2018, 03:28 PM

Quote:

Originally Posted by MikeB

Do you by chance have an 82 fuse panel that's not corroded, along with the dash harness?

I do not right now

thinair · 10-10-2018, 03:29 PM

Quote:

Originally Posted by trukman1

Do you have any of the brushed aluminum caps that go over the ends of the pull handles on the doors? (For an '88 K5).

ETA: Im also in need of a horn button, the tall, narrow one for a Chevrolet.

I have the caps, they are more of a chrome look.

trukman1 · 10-11-2018, 11:34 AM

Quote:

Originally Posted by thinair

I have the caps, they are more of a chrome look.

PM sent.

Adeldude · 10-11-2018, 05:12 PM

Hi! I'm looking for a few AC/HVAC system parts. I'm not sure if this is exactly what they are called but:

1 - The control arm assembly and actuator for the recirculator door/valve. (located on the passenger kick panel).

2 -The foot duct cover/blower for the heater box.

Thanks!
Dave

thinair · 10-11-2018, 05:57 PM

Quote:

Originally Posted by Adeldude

Hi! I'm looking for a few AC/HVAC system parts. I'm not sure if this is exactly what they are called but:

1 - The control arm assembly and actuator for the recirculator door/valve. (located on the passenger kick panel).

2 -The foot duct cover/blower for the heater box.

Thanks!
Dave

PM sent

**lowbrow454** · 10-14-2018, 08:49 AM

Any77-79 grilles? 79 headlight bezels?

thinair · 10-14-2018, 09:13 AM

Quote:

Originally Posted by lowbrow454

Any77-79 grilles? 79 headlight bezels?

Yes I do. PM sent

ericjon262 · 10-14-2018, 03:50 PM

I sent you a text using the info provided in your CL ad. I'm looking for a pair of big block radiator mounts, circled in the attached picture.

**MikeB** · 10-14-2018, 04:30 PM

Not to hijack the thread, but I have a brand new pair of those flat support brackets because I ended up using the "dropped" type, which are #10 in the drawing.

Send me a PM with your e-mail address, and I'll send you pictures to make sure they are what you need.

Mike

ericjon262 · 10-14-2018, 04:33 PM

Quote:

Originally Posted by MikeB

Not to hijack the thread, but I have a brand new pair of those flat support brackets because I ended up using the "dropped" type, which are #10 in the drawing.

Send me a PM with your e-mail address, and I'll send you pictures to make sure they are what you need.

Mike

Thanks, but it won't work, my radiator is too tall for them.

**MikeB** · 10-14-2018, 05:24 PM

I probably did a poor job explaining what I have. It's a pair of the brackets you circled. LMC P/Ns 32-0944 and 32-0945. Both are still in their original bags with P/N labels.

ericjon262 · 10-14-2018, 07:01 PM

thats #11 in the pic, and won't work (I have them already) thanks though.

82C10step · 10-14-2018, 09:34 PM

Do you still have the mirrors by chance?

thinair · 10-15-2018, 03:23 AM

Quote:

Originally Posted by 82C10step

Do you still have the mirrors by chance?

Which mirrors?

08-22-2018, 04:38 PM	#26
Oakdale Bud Registered User Join Date: Aug 2018 Location: Oakdale, CA Posts: 5	Re: 73-87 parts > it wont show my emojis

08-25-2018, 03:27 PM	#27
GM-1979 Registered User Join Date: Oct 2012 Location: NY Posts: 23	Re: 73-87 parts Interested in back glass 86 Is it sliding window ?

09-28-2018, 12:03 AM	#29
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 996	Re: 73-87 parts Ttt

09-28-2018, 11:26 AM	#30
rustyfive-seven Registered User Join Date: Jan 2013 Location: wolcott ct Posts: 51	Re: 73-87 parts wow good stuff! following on fb too!

09-28-2018, 12:31 PM	#31
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,856	Re: 73-87 parts looking for a nice used stock passenger side mirror for my '85 Suburban, just the regular stainless NON sport mirror type. Do you have any in your inventory? __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

09-28-2018, 10:57 PM	#34
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,408	Re: 73-87 parts Do you by chance have an 82 fuse panel that's not corroded, along with the dash harness? __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

10-07-2018, 12:00 PM	#35
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Re: 73-87 parts Do you have any of the brushed aluminum caps that go over the ends of the pull handles on the doors? (For an '88 K5). ETA: Im also in need of a horn button, the tall, narrow one for a Chevrolet. __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps

10-10-2018, 03:27 PM	#36
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 996	Re: 73-87 parts Sorry for the delayed responses

10-11-2018, 05:12 PM	#40
Adeldude Registered User Join Date: Sep 2018 Location: Brooklyn, NY Posts: 1	Re: 73-87 parts Hi! I'm looking for a few AC/HVAC system parts. I'm not sure if this is exactly what they are called but: 1 - The control arm assembly and actuator for the recirculator door/valve. (located on the passenger kick panel). 2 -The foot duct cover/blower for the heater box. Thanks! Dave

10-14-2018, 08:49 AM	#42
lowbrow454 Active Member Join Date: Jul 2015 Location: Anchorage, AK Posts: 145	Re: 73-87 parts Any77-79 grilles? 79 headlight bezels? __________________ '75 C10 SWB 454 '75 K10 SWB "The Gilded Turd" '77 K5 Blazer Chalet #0661 Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=776072 '79 K10 Bonanza

10-14-2018, 03:50 PM	#44
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 73-87 parts I sent you a text using the info provided in your CL ad. I'm looking for a pair of big block radiator mounts, circled in the attached picture. Attached Images __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

10-14-2018, 04:30 PM	#45
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,408	Re: 73-87 parts Not to hijack the thread, but I have a brand new pair of those flat support brackets because I ended up using the "dropped" type, which are #10 in the drawing. Send me a PM with your e-mail address, and I'll send you pictures to make sure they are what you need. Mike __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

10-14-2018, 05:24 PM	#47
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,408	Re: 73-87 parts I probably did a poor job explaining what I have. It's a pair of the brackets you circled. LMC P/Ns 32-0944 and 32-0945. Both are still in their original bags with P/N labels. __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

10-14-2018, 07:01 PM	#48
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 73-87 parts thats #11 in the pic, and won't work (I have them already) thanks though. __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

10-14-2018, 09:34 PM	#49
82C10step Registered User Join Date: Sep 2018 Location: Montoursville, PA Posts: 45	Re: 73-87 parts Do you still have the mirrors by chance?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.